http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Enhancement of Heating Performance of Carbon Nanotube Sheet with Granular Metal
Im, Hyeongwook,Jang, Eui Yun,Choi, Ajeong,Kim, Wal Jun,Kang, Tae June,Park, Yung Woo,Kim, Yong Hyup American Chemical Society 2012 ACS APPLIED MATERIALS & INTERFACES Vol.4 No.5
<P>A strategy for enhancing the heating performance of freestanding carbon nanotube (CNT) sheet is presented that involves decorating the sheet with granular-type palladium (Pd) particles. When Pd is added to the sheet, the heating efficiency of CNT sheet is increased by a factor of 3.6 (99.9 °C cm<SUP>2</SUP>/W vs 27.3 °C cm<SUP>2</SUP>/W with no Pd). Suppression of convective heat transfer loss attributes to the enhanced heat generation efficiency. However, higher heating response of CNT/Pd sheet was observed compared to CNT sheet, hence suggesting that the electron–lattice energy exchange could be additional heating mechanism in the presence of granular-type particles of Pd having a diameter of 10 nm or less. CNT sheet/Pd is quite stable, retaining its initial characteristics even after 300 cycles of on–off voltage pulses and shows fast thermal responses of the heating and cooling rates being 154 and −248 °C/s, respectively.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/aamick/2012/aamick.2012.4.issue-5/am300477u/production/images/medium/am-2012-00477u_0003.gif'></P>
임형욱(Hyeongwook Im),강태준(Tae June Kang),김대원(Dae Weon Kim),김용협(Yong Hyup Kim) 한국항공우주학회 2012 韓國航空宇宙學會誌 Vol.40 No.11
본 연구에서 폐열 에너지를 수집하여 직접 전기로 변환하는 박막형 열전지를 제작하였다. 전도성 탄소섬유에 탄소나노튜브를 코팅함으로써 전기 전도도는 증가하였고, 다양한 곡률 반경에 대한 굽힘 실험에서 전극의 저항변화는 없었다. 열전지의 최대출력은 온도차의 제곱에 비례하여 증가하였으며, 3.4 ℃의 온도차에서 2.5 ㎽/㎏의 전력을 생산하였다. 12시간의 방전 실험 결과, 열전지는 지속적으로 구동이 가능함을 확인하였다. 또한, 유연한 열전지를 뜨거운 유체가 흐르는 파이프에 감아 구동한 결과, 파이프의 곡률반경에 따라 내부저항은 감소하였고, 생산된 전력은 최대 30 % 상승하였다. 따라서 제작된 열전지는 다양한 곡면형 열원에 적용이 가능하다. In this study, a thin-film thermo-electrochemical cell that directly converts waste thermal energy into electrical energy was fabricated. Electrical conductivity of conducting carbon fiber, which was used as flexible electrode, was increased through coating of carbon nanotube, and resistance of the CNT-coated fiber electrode was not changed even after bending test with various curvatures. Maximum output power of the thermocell was increased quadratically with the temperature difference, and showed a value of about 2.5 ㎽/㎏ at temperature difference of 3.4 ℃. As a result of discharge test for 12 hours, it is confirmed that the cell can operates continuously. And thin-film thermocell wrapped around a pipe with hot liquid flowing within was demonstrated. Internal resistance of the cell was decreased with various curvature of heat pipe, and maximum output power was increased by 30 %. Therefore, the cell can be applied to various heat source.
변압기 프레스보드 Creepage Discharge와 유중가스 및 퓨란 생성물과의 상관성 분석
손형욱(Hyeongwook Son),김우빈(Woobin Kim),이동준(Dongzoon Lee),김정태(Jeongtae Kim) 대한전기학회 2019 전기학회논문지 Vol.68 No.6
In this study, the analysis for the correlation between the creepage discharge of transformer pressboard and the amount of dissolved gases in the oil and the furanic products has been performed. As a result, it was confirmed that a large and small discharge was concurrently generated until the tracking (carbonization) phenomenon on the pressboard occurred. It is found out that two kinds of process may exist in the correlation between the accumulated partial discharge quantity and the dissolved gas in oil, depending upon discharge pulse magnitude and the generating rate. The ‘fast process’ in which the average discharge pulse magnitude is large and the generating number per second (rate) is big, whereas ‘slow process’ is vice versa. According to the process, the dissolved gas in oil became different. In addition, the generation of CO gas was small during the tracking (carbonization) phenomenon of the pressboard, but there was a correlation with accumulated discharge quantity. On the contrary, CO₂ gas showed no correlation with accumulated discharge quantity. The correlation between the accumulated discharge quantity and the furanic product was very weak, but it is confirmed that 5M2F which is a result of local overheating showed some correlation.
재밍 신호 방향 추정 오차에 따른 항재밍 디지털 빔포밍 성능 확인
서형욱(Hyeongwook Seo),정현진(Hyeonjin Chung),김동현(Donghyun Kim),김선우(Sunwoo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문에서는 시뮬레이션을 통해 재밍 신호 방향 오탐지 시 재밍 신호 억제를 고려한 항재밍 디지털 빔포밍 벡터 설계 알고리즘의 성능을 확인하여 한계점 및 이후 연구 방향을 제시한다. 본 논문에서 사용된 알고리즘은 채널 상태 및 재밍 신호의 방향이 주어졌을 때 디지털 빔포밍을 통해 재밍 신호를 억제하여 사용자가 안정적인 정보 신호 수신을 가능케 한다. 그러나 재밍 신호의 방향을 정확히 탐지하는 것은 매우 어렵기 때문에 시뮬레이션을 통해 방향 오탐지 정도에 따른 알고리즘의 성능 저하를 확인하였다. 따라서 재밍 신호 방향 탐지가 정확하지 않더라도 성능을 떨어뜨리지 않기 위해 빔포밍 시 탐지한 재밍 신호 방향 주변 구역의 사이드로브를 넓게 억제하는 알고리즘 개발이 필요하다.
상향링크 단말 신호 및 재밍 신호 방향 추정 오차에 따른 항재밍 디지털 빔포밍 성능 분석
서형욱(Hyeongwook Seo),정현진(Hyeonjin Chung),김동현(Donghyun Kim),김선우(Sunwoo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.6
본 논문에서는 시뮬레이션 결과를 통해 상향링크 단말 신호 및 재밍 신호 방향 오탐지 시 항재밍 디지털 빔포밍 벡터 설계 알고리즘의 성능을 분석하고 이후 연구 방향을 제시한다. 본 논문에서 사용된 항재밍 디지털 빔포밍 벡터 설계 알고리즘은 사전에 추정한 상향링크 단말 신호 및 재밍 신호의 방향을 이용해 재밍 신호를 널링하고 단말의 상향링크 신호 방향으로 빔을 조향하여 통신 성능을 증가시킨다. 그러나 방향 오탐지 발생시 알고리즘의 성능은 급격히 저하되며 시뮬레이션을 통해 방향 오탐지 정도에 따른 성능 저하를 확인하였다. 따라서 방향 오탐지로 인해 야기되는 통신 성능 저하 방지를 위해 단말 및 재밍 신호가 메인로브 및 널을 벗어나지 않도록 널 폭 및 빔 폭을 제어하는 기술 개발의 필요성을 제시한다.
USRP를 이용한 1.75 GHz 대역 LTE 신호 방향 탐지 실험
김한빛(Hanvit Kim),방지훈(Jihoon Bang),정현진(Hyeonjin Chung),서형욱(Hyeongwook Seo),최재훈(Jaehoon Choi),김선우(Sunwoo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.11
본 논문은 MUSIC(multiple signal classification) 알고리즘을 기반으로한 단말의 방향 탐지 실험 결과를 제시한다. 실험을 위한 수신단 테스트베드는 4개의 안테나로 이루어진 선형 배열 안테나와 수신용 USRP 2대, 레퍼런스 신호 송신용 USRP 1대로 구성된다. 테스트베드를 통해 구현한 MUSIC 알고리즘을 이용하여 단말이 송출하는 신호의 방향 탐지 실험을 진행한다. 실내 환경에서 단말과 수신단 테스트베드 사이의 이격거리를 2.5m로 일정하게 유지한 상태로 위치를 고정시킨 후 Linux 기반 플랫폼의 GNU Radio를 통해 도래각 추정 데이터를 수집한다. 본 논문은 3개의 다른 각도에서 측정된 도래각 추정 실험 결과를 바탕으로 단말 LTE Uplink 신호를 이용한 MUSIC 알고리즘의 방향 탐지 성능을 분석한다.
USRP 기반 배열 안테나 테스트베드를 이용한 5.8 GHz 대역 MUSIC 실험
김한빛(Hanvit Kim),서형욱(Hyeongwook Seo),정현진(Hyeonjin Chung),방지훈(Jihoon Bang),최재훈(Jaehoon Choi),김선우(Sunwoo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.6
본 논문은 배열 안테나 신호처리 기법인 MUSIC(multiple signal classification) 알고리즘을 기반으로한 방향 탐지 실험 결과를 제시한다. 실험을 위해 4개의 안테나로 이루어진 선형 배열 안테나와 송수신용 USRP 2대로 5.8 GHz 방향탐지 테스트베드를 구성하였다. 본 논문에서는 테스트베드를 통해 MUSIC 알고리즘을 직접 구현하고 실제 환경에서의 성능을 분석한다. 거리를 일정하게 유지한 상태로 송신단과 수신단의 위치를 미리 고정시킨 후 GNU Radio를 통해 들어오는 실시간 데이터를 수집한다. 이와 같은 설정을 유지한 채 좌우 폭이 넓은 실내공간, 좌우 폭이 좁은 실내복도 환경, 실외 공간에서의 실험을 진행한다. 본 논문은 3개의 다른 실험 환경에 따른 MUSIC 알고리즘의 방향 탐지 성능을 분석한다.
Hyeongwook Lee,Seunghyun Boo,Gunyoung Kim,Bomson Lee 한국전자파학회JEES 2020 Journal of Electromagnetic Engineering and Science Vol.20 No.1
This paper presents a method for solving receiver misalignment (axial or angular) problems in wireless power transfer systems using a multiple-input single-output system. The optimum magnitudes and phases of the transmitter voltages and receiver load for maximum efficiency are derived in convenient analytical forms when negligible mutual couplings between transmitters. These solutions are validated by genetic algorithm optimization and electromagnetic-simulation results for a design ex-ample of two transmitters and one rotating receiver.