Anaerobic Digestion Treatment for the Mixture of Chinese cabbage Waste Juice and Swine Manure

( Gopi Krishna Kafle ),( Sang Hun Kim ),( Beom Soo Shin ) 한국농업기계학회 2012 바이오시스템공학 Vol.37 No.1

Purpose: The objective of this study was to investigate the feasibility of anaerobic digestion of Chinese cabbage waste juice (CCWJ) and swine manure(SM). Methods: The anaerobic digestion test was conducted under batch and continuous conditions at mesophilic temperature (36-38℃). The batch test was divided into Experiment I and II. In the Experiment I, biogas potential and production rate of CCWJ was evaluated. In Experiment II the effect of F/M ratio (2.0, 3.2, 4.9) at mixture ratio of 25:75(CCWJ: SM, % vol. basis) on biogas yield was studied. Results: CCWJ produced biogas and methane yield of 929 and 700 mL/g VS added respectively. The biogas yield from the mixture of CCWJ and SM was almost same at F/M ratio of 2.0 and 3.2 but dropped by 14% when F/M ratio increased from 3.2 to 4.9. In continuous test the mixture of CCWJ and SM (25:75, % vol. basis) produced biogas yield of 352 mL/g VS added which is around 11% higher compared to biogas yield from SM alone. Addition to biogas yield digester performance was also improved with co-digestion of CCWJ with SM. Conclusions: The results showed that the anaerobic digestion of CCWJ with SM could be promising for improving both the biogas yield and digester performance at mesophilic temperature.

One-pot hydrothermal synthesis of tungsten diselenide/reduced graphene oxide composite as advanced electrode materials for supercapacitors

Gopi, Chandu V.V. Muralee,Reddy, Araveeti Eswar,Bak, Jin-Soo,Cho, In-Ho,Kim, Hee-Je Elsevier 2018 Materials letters Vol.223 No.-

<P><B>Abstract</B></P> <P>Nanosheet-like tungsten diselenide (WSe<SUB>2</SUB>)/reduced graphene oxide (rGO) hybrid has been developed for the first time by facile one-step hydrothermal route for supercapacitor applications. Electrochemical measurements show that the WSe<SUB>2</SUB>/rGO-based supercapacitor electrode exhibits a maximum specific capacitance of 389 F g<SUP>−1</SUP> at 1 A g<SUP>−1</SUP> with capacitance retention of 98.7% after 3000 charge/discharge cycles at a high current density of 7 A g<SUP>−1</SUP>, and delivered a energy density of 34.5 W h kg<SUP>−1</SUP> at 400 W kg<SUP>−1</SUP> and 22.4 W h kg<SUP>−1</SUP> at a high power density of 4000 W kg<SUP>−1</SUP>.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Novel WSe<SUB>2</SUB>/rGO firstly synthesized for energy storage applications. </LI> <LI> WSe<SUB>2</SUB>/rGO shows large surface area and superior conductivity. </LI> <LI> WSe<SUB>2</SUB>/rGO composite exhibits high specific capacitance and outstanding cycling stability. </LI> </UL> </P>

COINCIDENCE THEOREMS VIA CONTRACTIVE MAPPINGS IN ORDERED NON-ARCHIMEDEAN FUZZY METRIC SPACES

Gopi Prasad,Anita Tomar,Ramesh Chandra Dimri,Ayush Bartwal 한국수학교육학회 2020 純粹 및 應用數學 Vol.27 No.4

In this article, we prove coincidence point theorems for comparable ψ-contractive mappings in ordered non-Archimedean fuzzy metric spaces utilizing the recently established concept of T -comparability and relatively weaker order theoretic variants. With a view to show the usefulness and applicability of this work, we solve the system of ordered Fredholm integral equations as an application. In the process, this presentation generalize and improve some prominent recent results obtained in Mihet [Fuzzy Sets Syst., 159 (6), 739-744, (2008)], Altun and Mihet [ Fixed Point Theory Appl. 2010, 782680, (2010)], Alam and Imdad [Fixed Point Theory, 18(2), 415-432, (2017)] and several others in the settings of partially ordered non-Archimedean fuzzy metric spaces.

Low-temperature easy-processed carbon nanotube contact for high-performance metal- and hole-transporting layer-free perovskite solar cells

Gopi, C.V.V.M.,Venkata-Haritha, M.,Prabakar, K.,Kim, H.J. Elsevier Sequoia 2017 Journal of photochemistry and photobiology. A, Che Vol.332 No.-

Expensive and energy-consuming vacuum process of metal deposition with ambient-unstable hole transporters are incompatible with large-scale and low-cost production of perovskite solar cells (PSCs) and thus hampers their commercialization. For the first time, we demonstrate cost-effective novel carbon nanotube (CNT) paste that was applied to FTO substrate by the facile doctor blade method and processed at low temperature (100<SUP>o</SUP>C). Herein we report a new method of cost-efficient perovskite solar cells with the use of conventional hole transporters by directly clamping a selective hole extraction electrode made of CNT and a TiO<SUB>2</SUB>/perovskite photoanode. Most importantly, under optimized conditions in the absence of an organic hole-transporting material and metal contact, CH<SUB>3</SUB>NH<SUB>3</SUB>PbI<SUB>3</SUB> and CNTs formed a solar cell with an efficiency of up to 7.83%. The PSC devices are fabricated in air without high-vacuum deposition which simplifies the processing and lowers the threshold of both scientific research and industrial production of PSCs. Electrochemical impedance spectroscopy demonstrates good charge transport characteristics of CEs on the photovoltaic performance of devices. The PSCs exhibited good stability over 50h. The abundance, low cost, and excellent properties of the CNT material offer wide prospects for further applications in PSCs.

Enhancing the efficiency of zinc oxide vulcanization in brominated poly (isobutylene-co-isoprene) rubber using structurally different Bismaleimides

Gopi Sathi, Shibulal,Jeon, Jinseok,Won, Joohey,Nah, Changwoon Springer-Verlag 2018 Journal of polymer research Vol.25 No.5

Effective Treatment of Swine Manure with Chinese Cabbage Silage through Serial Anaerobic Digestion

Gopi Krishna Kafle 강원대학교 농업생명과학연구원(구 농업과학연구소) 2009 강원 농업생명환경연구 Vol.21 No.-

In this study performance of serial completely stirred tank reactors (CSTRs) for treating Swine manure with Chinese cabbage silage by mixing in 3:1 proportion in VS basis was evaluated. The study was done in lab scale and as well as in pilot scale. Comparative study on single stage digestion and serial digestion was also made. The test was performed for OLR from 1.84 to 6.8 g VS/l and HRT of 16-40 days. The VS and TCOD removal was found up to 60 and 65 % in two serial CSTRs and up to 68 and 77 % respectively in three serial CSTRs digestion system. At OLR of 2.1-2.6 g VS/l and HRT of 32 days the biogas yield and methane yield found to be 0.6-0.7 g VS/l and 0.4-0.48 g VS/l respectively for lab scale two serial CSTRs and 0.55-0.61 l/g VS and 0.41-0.42 l/g VS respectively in pilot scale two serial CSTRs. Biogas yield was improved up to 20 % through serial digestion. FOS/TAC was found efficient indicator for instant reactor stability for high buffering feed like swine manure. Higher methane yield was obtained at FOS/TAC value below 0.7. When FOS accumulation was below 10,000 mg/l the reactors operated well without imbalance for FOS/TAC value up to 1.0. Material exchange method was found effective in overcoming instability in reactors and improving biogas yield. The H2S concentration in biogas was reduced up to 200ppm from 5000ppm or above value by micro-aeration.

Improved photovoltaic performance and stability of quantum dot sensitized solar cells using Mn-ZnSe shell structure with enhanced light absorption and recombination control

Gopi, Chandu V. V. M.,Venkata-Haritha, M.,Kim, Soo-Kyoung,Kim, Hee-Je The Royal Society of Chemistry 2015 Nanoscale Vol.7 No.29

<P>To make quantum-dot-sensitized solar cells (QDSSCs) competitive, photovoltaic parameters comparable to those of other emerging solar cell technologies are necessary. In the present study, ZnSe was used as an alternative to ZnS, one of the most widely used passivation materials in QDSSCs. ZnSe was deposited on a TiO2-CdS-CdSe photoanode to form a core-shell structure, which was more efficient in terms of reducing the electron recombination in QDSSCs. The development of an efficient passivation layer is a requirement for preventing recombination processes in order to attain high-performance and stable QDSSCs. A layer of inorganic Mn-ZnSe was applied to a QD-sensitized photoanode to enhance the adsorption and strongly inhibit interfacial recombination processes in QDSSCs, which greatly improved the power conversion efficiency. Impedance spectroscopy revealed that the combined Mn doping with ZnSe treatment reduces interfacial recombination and increases charge collection efficiency compared with Mn-ZnS, ZnS, and ZnSe. A solar cell based on the CdS-CdSe-Mn-ZnSe photoanode yielded excellent performance with a solar power conversion efficiency of 5.67%, Voc of 0.584 V, and Jsc of 17.59 mA cm(-2). Enhanced electron transport and reduced electron recombination are responsible for the improved Jsc and Voc of the QDSSCs. The effective electron lifetime of the device with Mn-ZnSe was higher than those with Mn-ZnS, ZnSe, and ZnS, leading to more efficient electron-hole separation and slower electron recombination.</P>

A strategy to improve the energy conversion efficiency and stability of quantum dot-sensitized solar cells using manganese-doped cadmium sulfide quantum dots

Gopi, Chandu V. V. M.,Venkata-Haritha, M.,Kim, Soo-Kyoung,Kim, Hee-Je The Royal Society of Chemistry 2015 Dalton Transactions Vol.44 No.2

<P>This article describes the effect of manganese (Mn) doping in CdS to improve the photovoltaic performance of quantum dot sensitized solar cells (QDSSCs). The performances of the QDSSCs are examined in detail using a polysulfide electrolyte with a copper sulfide (CuS) counter electrode. Under the illumination of one sun (AM 1.5 G, 100 mW cm<SUP>−2</SUP>), 10 molar% Mn-doped CdS QDSSCs exhibit a power conversion efficiency (<I>η</I>) of 2.85%, which is higher than the value of 2.11% obtained with bare CdS. The improved photovoltaic performance is due to the impurities from Mn<SUP>2+</SUP> doping of CdS, which have an impact on the structure of the host material and decrease the surface roughness. The surface roughness and morphology of Mn-doped CdS nanoparticles can be characterised from atomic force microscopy images. Furthermore, the cell device based on the Mn-CdS electrode shows superior stability in the sulfide/polysulfide electrolyte in a working state for over 10 h, resulting in a highly reproducible performance, which is a serious challenge for the Mn-doped solar cell. Our finding provides an effective method for the fabrication of Mn-doped CdS QDs, which can pave the way to further improve the efficiency of future QDSSCs.</P> <P>Graphic Abstract</P><P>Better stability and higher performance of Mn-doped CdS QDSSCs (PCE = 2.85%) than those of CdS QDSSCs (PCE = 2.11%). <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c4dt03063j'> </P>

Agri-environmental System Engineering and Energy : Original Article ; Emissions of Odor, Ammonia, Hydrogen Sulfide, and Volatile Organic Compounds from Shallow-Pit Pig Nursery Rooms

( Gopi Krishna Kafle ),( Lide Chen ) 한국농업기계학회 2014 바이오시스템공학 Vol.39 No.2

Purpose: The objective of this study was to measure emissions of gases (ammonia (NH3), hydrogen sulfide (H2S) and carbondioxide (CO2)), volatile organic compounds (VOC) and odor from two shallow pit pig nursery rooms. Gas and odor reductionpractices for swine operations based on the literature were also discussed. Methods: This study was conducted for 60 daysat a commercial swine nursery facility which consisted of four identical rooms with mechanical ventilations. Two rooms(room 1 (R1) and room 2 (R2)) with different pig numbers and ventilation rates were used in this study. The pig manurefrom both the R1 and R2 were characterized. Indoor/outdoor temperatures, ventilation rates/duration, NH3, H2S, CO2, andVOC concentrations of the ventilation air were measured periodically (3-5 times/week). Odor concentrations of theventilations were measured two times on two days. Three different types of gas and odor reduction practices (diet control,chemical method, and biological method) were discussed in this study. Results: The volatile solids to total solids ratio(VS/TS) and crude protein (CP) value of pig manure indicated the pig manure had high potential for gas and odor emissions. The NH3, H2S, CO2 and VOC concentrations were measured in the ranges of 1.0-13.3, 0.1-5.7, 1600-3000 and 0.0-1.83 ppm,respectively. The NH3 concentrations were found significantly higher than H2S concentrations for both rooms. The odorconcentrations were measured in the range of 2853-4432 OUE/m3. There was significant difference in odor concentrationsbetween the two rooms which was due to difference in pig numbers and ventilation duration. The literature studies showedthat simultaneous use of dietary control and biofiltration practices will be more effective and environmentally friendly forgas and odor reductions from pig barns. Conclusions: The gas and odor concentrations measured in the ventilation air fromthe pig rooms indicate an acute need for using gas and odor mitigation technologies. Adopting diet control and biofiltrationpractices simultaneously could be the best option for mitigating gas and odor emissions from pig barns.

Evaluation of the Biogas Productivity Potential of Fish Waste: A Lab Scale Batch Study

( Gopi Krishna Kafle ),( Sang Hun Kim ) 한국농업기계학회 2012 바이오시스템공학 Vol.37 No.5

Purpose: The biogas productivity potential of fish waste (FW) was evaluated. Methods: Batch trials were carried out in 1.3 L glass digesters kept in a temperature controlled chambers at 36.5˚C. The first order kinetic model and the modified Gompertz model were evaluated for biogas production. The Chen and Hashimoto model was used to determine the critical hydraulic retention time (HRT Critical) for FW under mesophilic conditions. The feasibility of co-digestion of FW with animal manure was studied. Results: The biogas and methane potential of FW was found to be 757 and 554 mL/g VS, respectively. The methane content in the biogas produced from FW was found to be 73% and VS removal was found to be 77%. There was smaller difference between measured and predicted biogas production when using the modified Gompertz model (16.5%) than using first order kinetic model (31%). The time period for 80%-90% of biogas production (T80-90) from FW was calculated to be 50.3-53.5 days. Similarly, the HRT Critical for FW was calculated to be 13 days under mesophilic conditions. The methane production from swine manure (SM) and cow manure (CM) digesters could be enhanced by 13%-115% and 17%-152% by mixing 10%-90% of FW with SM and CM, respectively. Conclusions: The FW was found to be highly potential substrate for anaerobic digestion for biogas production. The modified Gompertz model could be more appropriate in describing anaerobic digestion process of FW. It could be promising for co-digestion of FW with animal manure.