http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
충격성 잡음에 효과적인 사분위편차 기반 쿼드트리 영역분할
고성식,구대성,최현용,김정화,Shik Koh Sung,Ku Dae Sung,Choh Hyun Yong,Kim Chung Hwa 대한전자공학회 2005 電子工學會論文誌-SP (Signal processing) Vol.42 No.2
지금까지 많은 영상 영역분할 방법들이 연구되고 있으나 이들 방법들은 잡음영상에 대해서는 주로 백색잡음과 같은 일반적인 환경에서 영상을 처리하였지만, 충격성 잡음 영상에 대해서는 영상과 잡음을 정확히 구별할 수 있는 파리미터를 추출하기가 어렵기 때문에 효과가 떨어지는 문제점을 가지고 있다. 그래서 기존 방법을 이용한 모든 응용분야에는 충격성 잡음에 따른 성능 저하의 잠재성이 항상 내포되어 있다. 본 논문에서는 충격성 잡음 영상에 효과적으로 영상정보 파라미터를 추출할 수 있는 사분위편차(quartile deviation) 기반 쿼드트리 영역분할 방법을 제안한다. 본 방식은 영상데이터의 전송이나 처리과정에서 포함될 수 있는 충격성 잡음을 영상정보로부터 판별할 수 있는 장점을 가기지 때문에 다양한 영상처리 분야에 응용할 수 있다. 실험적인 비교를 통해서 제안한 쿼드트리 영역분할 방법이 충격성 잡음이 첨가된 환경에서 영상정보 파라미터를 정확히 추정할 수 있다는 것을 확인할 수 있음을 검증하였다. There are many image segmentation methods having bon published as the results of research so far, however these are for the noise images which can process an image under the general white noise environments. Therefore, these methods has the disadvantages because it is difficult to extract only the accurate parameters, which can distinguish between image and impulsive noise, from image with impulsive noises. So it has a problem about the potential decreasing of the performance according to the impulsive noise for all applications using the present quadtree segmentation. In this paper, we propose new quadtree segmentation using quartile deviation which can extract effectively the image information parameters from a noise image. Therefore our method can apply for various image processing fields because it has a advantage to distinguish an image information from noise image. As the result of simulation, we confirm that the proposed quadtree segmentation is more efficient than the present method when tested on impulsive noise image.
분산산술연산방식을 이용한 MPEG-1 오디오 계층 3 합성필터의 FPGA 군현
고성식,최현용,김종빈,구대성,Koh Sung-Shik,Choi Hyun-Yong,Kim Jong-Bin,Ku Dae-Sung 한국음향학회 2004 韓國音響學會誌 Vol.23 No.8
반도체 기술과 멀티미디어 통신기술이 발달하면서 고품위 영상과 다중 채널의 오디오에 관심을 갖게 되었다. MPEG 오디오 계층 3 디코더는 표준안에 기반을 둔 프로세서로써 기존에 많이 구현되어 있다. MPBG-1오디오 계층3 디코더의 합성필터는 디코더 전체에서 가장 많은 연산을 필요로 하기 때문에 고속 프로세서를 설계하기 위해서는 연산량을 줄일 수 있는 새로운 방식의 합성필터를 필요로 한다. 따라서 본 논문에서는 MPEG-1 오디오 계층 3의 핵심부분인 합성필터 부분을 DALUT (distributed arithmetic look-up table)방식을 이용하여 FPGA (Field Programmable Gate Array)에 구현하였다. 고속 필터를 설계하기 위해서 승산기 대신에 DALUT방식을 사용하였고, 파이프라인 구조를 사용하였으며, 데이터를 코사인 함수와 곱셈한 결과를 테이블로 만듦으로써 곱셈기를 제거하여 30%의 성능향상을 얻었다. 본 논문에서의 하드웨어 설계는 모두 VHDL (VHSIC Hardware Description Language)로 기술하였다. VHDL 시뮬레이션은 ALDEC사의 Active-HDL 6.1과 Model-sim 및 합성은 Synplify Pro 7.2v을 사용하였다. 대상 라이브러리는 XILINX사의 XC4010E, XC4020BX, XC4052 XL, P&R 툴은 XACT Ml.4를 사용하여 구현하였다. 구현된 프로세서는 20MHz∼70MHz사이에서 동작한다. As the technologies of semiconductor and multimedia communication have been improved. the high-quality video and the multi-channel audio have been highlighted. MPEG Audio Layer 3 decoder has been implemented as a Processor using a standard. Since the synthesis filter of MPEG-1 Audio Layer 3 decoder requires the most outstanding operation in the entire decoder. the synthesis filter that can reduce the amount of operation is needed for the design of the high-speed processor. Therefore, in this paper, the synthesis filter. the most important part of MPEG Audio, is materialized in FPGA using the method of DAULT (distributed arithemetic look-up table). For the design of high-speed synthesis filter, the DAULT method is used instead of a multiplier and a Pipeline structure is used. The Performance improvement by 30% is obtained by additionally making the result of multiplication of data with cosine function into the table. All hardware design of this Paper are described using VHDL (VHIC Hardware Description Language) Active-HDL 6.1 of ALDEC is used for VHDL simulation and Synplify Pro 7.2V is used for Model-sim and synthesis. The corresponding library is materialized by XC4013E and XC4020EX. XC4052XL of XILINX and XACT M1.4 is used for P&R tool. The materialized processor operates from 20MHz to 70MHz.