http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
S.N. Chattopadhyay,C. B. Overton,S. Vetter,M. Azadeh,B. H. Olson,N. El Naga 대한전자공학회 2010 Journal of semiconductor technology and science Vol.10 No.3
An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 ㎚ wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.
Chattopadhyay, S.N.,Overton, C.B.,Vetter, S.,Azadeh, M.,Olson, B.H.,Naga, N. El The Institute of Electronics and Information Engin 2010 Journal of semiconductor technology and science Vol.10 No.3
An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 nm wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.
A Systematic Study on Iron Carbides from First-Principles
Kim, In Gee,Rahman, Gul,Jang, Jae Hoon,Song, You Young,Seo, Seung Woo,Bhadeshia, H.K.D.H.,Freeman, A.J.,Olson, G.B. Trans Tech Publications, Ltd. 2010 Materials science forum Vol.654 No.-
<P>The formation enthalpy of a series of Fe-C carbides has been estimated using a first-principles approach. The Fe to C ratio dependence of the formation enthalpy is reasonable, but it is revealed that - and -carbides require an extraordinary environment to be able to form. Furthermore, an addition of substitutional solutes other than Fe and C should promote other carbides with different crystal structures. The analysis suggests further studies to discover the critical concentrations of alloying which stimulate the other carbides to become more stable.</P>