http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
생물학적 판넬용 마그네시아-인산칼륨 복합체의 유동 및 압축강도 특성
최연왕(Yung-Wang Choi),이재흔(Jae-Heun Lee),최병걸(Byung-Keol Choi),오성록(Sung-Rok Oh) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.7
본 논문에서는 생물학적 판넬의 모재로써 마그네시아-인산칼륨 복합체의 품질을 제어하기 위하여 마그네시아-인산칼륨 복합체의 혼합비와 물-결합재비(W/B)에 대한 유동 및 압축강도의 영향을 고찰하고자 하였다. MPPC는 W/B 7수준(30, 35, 40, 45, 50, 55 and 60 vol. %) 및 인산칼륨 및 마그네시아 비율(P:M) 4수준(1;0.5, 1;1.0, 1;2.0 and 1;3.0)으로 제조하였으며, 실험결과, MPPC의 유동 및 압축강도는 P:M비 및W/B에 크게 의존하는 것을 확인할 수 있었다. MPPC의 플로우는 P:M이 증가할수록 반응을 위한 배합수의 부족으로 혼합이 되지 않는 것으로 나타났으며, 이러한 원인은 P의 밀도와 M의 밀도가 크기 때문인 것으로 나타났다. 또한 MPPC의 압축강도는 P:M이 증가함에 따라 강도가 감소하는 경향이 나타났으나 W/B에 따라서는 비례적인 변화가 나타나지 않아 모순된 결과가 나타났다. 이러한 결과는 MPPC의 경우 W/B에 따라 최적의 배합비율이 존재함을 확인할 수 있었다. 본 논문의 이러한 결과를 통하여 생물학적 판넬 설계시 재료적 측면에서 모재 재료의 유동성 및 압축강도에 대한품질 제어를 위한 기반자료로써 활용하고자 한다. In this paper, we investigated the influence of flow and compressive strength on the mixing ratio and water-to-binder (W/B) ratio of magnesia - potassium phosphate composites for controlling the quality of the Magnesia-Potassium Phosphate Composites(Magnesia-Potassium Phosphate Composites,MPPC) as a matrix material for biological panels. MPPC was produced at 7 W/B ratios (30, 35, 40, 45, 50, 55 and 60 vol.%) and 4 P:M ratios (1:0.5, 1:1.0, 1:2.0 and 1:3.0). The experiment results confirmed that the flow and compressive strength of MPPC depend strongly on both P:M and W/B ratios. The flow of MPPC showed that as P: M was increased, the mixing did not occur due to the shortage of the compounding amount for the reaction, because of the large density difference between P and M. The compressive strength of MPPC showed a tendency to decrease with increasing P:Mratio but there was a contradictory result with no proportional change according to W/B ratio. These results indicate that the optimum compounding ratio exists for MPPC according to W/B ratio. These results will be used as the basis data for quality control of the fluidity and compressive strength of matrix materials in terms of material in biological panel design.
규산염계 무기 재료를 활용한 침투성 보수재의 기초 특성에 관한 실험적 연구
하상우(Sang-Woo Ha),오성록(Sung-Rok Oh),최연왕(Yung-Wang Choi) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.7
본 연구에서는 규산염계 무기재료를 활용한 침투성 보수재의 개발을 위한 일환의 기초 연구로써 국내에서 쉽게 입수가 가능한 규산염계 무기재료를 주성분으로 하는 침투성 보수 재를 제조하였다. 또한, 규산염계 무기재료를 활용한 침투성 보수재는 국외에서 많은 활용사례가 있는 제품군을 선정하여 보수재의 성능을 비교ㆍ고찰하고자 하였다. 실험에 사용된 규산염계 무기재료는 Sodium, Potassium 및 Lithium silicate를 주성분으로 하는 규산염계 무기재료를 활용한 침투성 보수재를 제조하였다. 규산염계 무기재료를 활용한 침투성 보수재의 성능평가는 내흡수 및 내투수, 압축 및 부착, 급속 염소 이온 침투, 급속 동결 융해, 내약품성 시험을 실시하였다. 실험결과 규산염계 무기재료를 활용한 침투성 보수재는 모든 부분에서 효과적인 성능을 발휘하는 것으로 나타났다. 이러한 결과의 주요 원인은 모세관을 따라 내부로 침투되어 조직을 치밀하게 하기 때문인 것으로 나타났다. 따라서 본 실험결과를 기반으로 콘크리트의 내구성을 향상시키는 데 다양하게 활용 가능할 것으로 판단된다. In this study, permeable repair materials mainly composed of silicate - based inorganic materials(SIM), which are easily available domestically, were prepared as a basic study for the development of permeable repair materials using SIM. SIM were compared and examined for their performance as repair materials by selecting a product group which has many cases of use in foreign countries. The SIM used were mainly composed of sodium, potassium and lithium silicate. Performance evaluation of SIM was performed by absorption and penetration, compression and adhesion, rapid chloride ion penetration, rapid freezing and thawing, and chemical resistance test. According to the test results, SIM showed effective performance in all areas, mainly because SIM permeates into the interior of the capillary and has a dense internal microstructure. Therefore, it can be used variously to improve the durability of concrete based on the results of this experiment.
무선 센서 네트웍을 이용한 콘크리트 유동성능 평가장치 설계
이보희(Lee, Bol-Hee),경정규(Kyeong, Jeong-Kyu),최연왕(Choi, Yung-Wang),정재권(Jeong, Jae-Gwon) 한국전기전자학회 2010 전기전자학회논문지 Vol.14 No.3
고유동 콘크리트 유동성능 평가장치는 슬럼프 플로 500 mm 도달속도와 플로우 유동의 데이터를 종합하여 KS F 2594 기준을 측정하기 위한 장비이다. 그러나 기존의 KS F 2594 측정 방법은 시험은 시험자와 감독자의 관점에 따라 점도에 대한 데이터가 매우 불규칙하여, 실무에서는 작은 수치 차이로 인하여 많은 의견 충돌이 발생하는 문제점이 있다. 따라서 본 논문 에서는 기존의 이러한 문제점을 개선한 형태의 기구부의 메카니즘 설계와, 아울러 기구부를 구동하는 전자회로를 제시 하였다. 아울러 설계된 장치와 사용자간의 인터페이스를 위한 알고리즘과 무선센서 네트웍을 사용한 데이터 전송 방식에 대하여 다루었다. 제시된 방법은 실제 실험을 통해 검증하여 그 유용성을 보였다. The high flowability performance evaluation device for the concrete is the device which was designed to compensate from the incorrect data detection of the viscosimetry examination of the existing concrete. As for the existing concrete viscosimetry method, the measuring data for a viscosity are very irregular by the point of view of an experimenter and a supervisor, Therefore there were some problems to have many different opinions by a small numerical value difference according to the job characteristic. In this paper, we suggested some mechanism to compensate the problem and some driving electronics including the related algorithm, and the communication structure with wireless sensor network between the devices and users are also presented. The effectiveness of the suggested method was verified with a real experiment.