http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
습식 체분리법을 이용한 알루미나분말 중의 조대입자 함량평가
정상진,임형미,이승인,김영희,김수룡,조용익,Jung, Sang-Jin,Lim, Hyung-Mi,Lee, Seung-In,Kim, Young-Hee,Kim, Soo-Ryong,Cho, Yong-Ick 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.8
세라믹 분말을 이용하여 슬러리와 분산제의 농도에 따른 조대입자 함량평가에 대한 연구를 수행하였다. 시판용의 알루미나 분말을 조대입자 분리용 시료로 사용하였으며, 분산제로는 sodium hexametaphosphate와 sodium polyacrylate를 사용하였다. 알루미나 농도의 증가 및 분산제 농도의 감소에 따라 조대입자의 함량이 증가하였다. 슬러리 내의 시료농도가 1.0wt%이고, 시료에 대해 1.0wt%의 분산제를 첨가하였을 때 조대입자의 함량이 가장 작게 측정됨을 알 수 있었다. 고분자 분산제인 sodium polyacrylate를 사용하여 sodium hexametaphosphate보다 조대입자의 함량이 크게 측정되었다. 실험횟수가 증가함에 따라, 체의 질량이 일정한 비율로 감소하는 경향을 나타냈다. 조대입자의 함량을 알고 있는 임의의 슬러리를 제조하여 실험을 실시한 결과, 본 연구에서 사용한 습식 체분리 방법은 조대입자 함량평가에 적합한 것으로 사료된다. The effects of solid and dispersant concentration was investigated by wet-sieving method for knowing the amount of coarse particle in fine powders. In the work alumina powders, sodium hexametaphosphate and sodium polyacrylate were used for preparing slurry. It was confirmed that the coarse particle mass increased by increasing alumina concentration and decreasing dispersant concentration. With systematic measurements we know that the alumina powder and dispersant of one weight percent(1.0wt%) were proper quantity for coarse particle mass measuring, respectively. Sodium polyacrylate as dispersant showed higher coarse particle mass than sodium hexametaphosphate. The sieve mass was decreased according to increase of experiment number. Based on experiments it was considered that wet-sieving method is good tool for measuring a coarse particle mass in fine powders.
이윤철(Yoon Chul Lee),채성기(Sung Gi Chae),김강호(Kang Ho Kim),조용익(Yong Ick Cho) 한국조명·전기설비학회 2011 한국조명·전기설비학회 학술대회논문집 Vol.2011 No.5월
최근 LED조명은 고효율 및 에너지절감효과 등 여러 장점의 이유로 기존 실내조명인 형광등을 대체하고 있는 상황이다. 현재 사무실 조명에 대한 설계기준과 성능 평가에 대한 연구는 국내·외에서 활발히 진행되고 있다. 이에 본 논문에서는 LED 사무실조명 계산방법 기준 및 평균조도, 평균휘도, 균제도, 글레어, 조명 기구배광, 조명율, 보수율 등 LED조명설계기준에 대한 연구, 기존 국내·외 설계 기술에 대한 연구 및 이 기준에 대한 실내조명용 LED 면조명 적용기술 개발 등에 대한 연구를 하고자 한다. 이를 위해 본 연구에서는 일반 형광등 및 LED 면조명의 광특성 및 배광평가를 하고 조명용 광학 시뮬레이션 tool을 활용하여 제안한 설계 기준 및 성능 기준에 대한 결과 분석을 통해 LED 면조명의 성능 및 에너지 절감 등에 대해 결과를 분석하였다. Recently Conventional fluorescent Lighting is replaced with LED Flat luminaires for Office Lighting because of High Luminous Efficacy and Energy Saving effect. Today, the investigation of design criteria and performance evaluation method for Office Lighting is thoroughgoing enough at Home and Foreign site. In this paper, we are finding out the Research of LED Office Lighting Calculation method and LED Illumination design Criteria (Average illuminance, Average Luminance, Uniformity, Glare, Luminous intensity distribution, Maintenance Factor) and Design Criteria at Home and Foreign site and Criteria of LED Flat Luminaires Application Technalogy for Office Lighting. In this paper, we are testing luminous intensity distribution and Optical Charateristic of Conventional fluorescent Lighting and LED Flat luminaires. we are finding out the Performance and Energy saving result of LED Flat Luminaires using by Illumination Light simulation tools about the proposed design criteria and Performance criteria.