http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손익부(Ik Bu Sohn),이만섭(Man Seop Lee),우정식(Jung Sik Woo),이상만(Sang Man Lee),정정용(Jeong Yong Chung) 한국레이저가공학회 2005 한국레이저가공학회지 Vol.8 No.1
??We report experimental results on the periodic patterning using a Ti:sapphire femtosecond laser (800 ㎚, 100 fs, 1㎑). Periodic structures with reproducible basic patterns are produced both on the surface and inside transparent materials. Period patterning for the application to display panel is widely investigated. Also, the submicron dot and line patterns are fabricated inside fused silica glass, which is important for the formation of diffraction grating in integrated optical circuit. Finally, we demonstrate the utility of the femtosecond laser application to optical memory by fabricating the three-dimensional dot patterns.
수반응성 금속 연료의 연소 속도 측정을 위한 초음파 측정 시스템 개발
서무경(Mu-Kyung Seo),강토(To Kang),김훈희(Hun-Hee Kim),황영인(Young-In Hwan),김학준(Hak-Joon Kim),송성진(Sung-Jin Song),유지창(Ji-Chang Yoo),김준형(Jun-Hyung Kim),정정용(Jung-Yong Jung) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
수중 운동체의 연료로 사용되는 수반응성 금속 연료(Hydro-Reactive metal Fuel, 이하 HRF)는 일반적인 고체 추진제와 달리, 산화제를 물을 이용하여 사용기 때문에 산화제의 함량이 매우 적다. 수중 운동체의 추진 성능 평가를 위해서는 HRF 추진제의 연소 특성을 평가해야 하는데 연소 특성 평가 방법 중 하나로 추진제의 연소속도를 측정한다. 초음파법은 한 번의 실험으로 연소 중의 압력 범위에서의 연소 속도 데이터를 획득할 수 있기 때문에 효과적이고 경제적인 측정 방법이다. 그래서 본 논문에서는 초음파법을 HRF 추진제에 적용하여 가수 조건이 구현 가능한 HRF 추진제의 연소속도 측정 시스템을 개발하고자 한다. Hydro-Reactive metal Fuel(HRF) propellant used in underwater vehicles has far lower oxidizer content than general solid propellant because of using water as oxidizer unlike general solid propellant. Measuring burning rate is one of evaluation methods about burning character for evaluating propulsion efficiency of underwater vehicles. The ultrasound method is used as an effective and economical tool for measuring burning rate of solid propellants, because it can measure burning rate of solid propellants with wide range of pressure in a single test. So , in this paper, ultrasound method is used in ultrasound measuring system enabling water to inject a combustion chamber for measuring burning rates of HRF propellant.
고체추진제 연소속도 측정의 정밀도 향상을 위한 초음파 신호 잡음제거 기술 연구
전수균(Su-Kyun Jeon),송성진(Sung-Jin Song),김학준(Hak-Joon Kim),고선필(Sun-Feel Ko),오현택(Hyun-Taek Oh),김인철(In-Chul Kim),유지창(Ji-Chang Yoo),정정용(Jung Yong Jung) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
기존 연구를 통해 초음파법을 이용한 고체추진제 연소속도 측정 시스템 및 연소속도 산정 기법을 개발하였으며, 스트랜드버너법과 비교하여 두 측정 기법의 특성을 비교해보았다. 그 결과 초음파법은 측정된 추진제의 잔존길이를 연소시간으로 미분함으로써 고체 추진제의 연소속도를 계산하기 때문에 한번의 시험으로 넓은 압력구간에 걸쳐 고체추진제 연소속도를 구하는 장점이 있으나, 초음파 측정신호의 잡음이 연소속도의 정밀도 및 신뢰성에 영향을 미침을 알 수 있었다. 따라서, 본 연구에서는 압력시험과 연소시험에서 획득한 측정신호의 잡음 제거 기법을 제안하고, 제안된 기술을 적용하여 연소속도를 측정한 결과와 제안된 기술을 적용하지 않은 경우를 비교하여 제안된 기술의 성능을 평가하였다. Ultrasonic techniques have the advantage of determining the burning rates with wide range of pressure in only a single test. However, ultrasonic techniques have a drawback, which is that they are using high frequency transducers and it is easily affected by noise. Therefore, ultrasonic measurement method needs noise reduction algorithm to improve or grantee accuracy of burning rate measurements of solid propellants using ultrasound. Thus, in the present study, we propose a noise reduction method of measured ultrasonic signals by applying wavelet shrinkage.
고체추진제 초음파 연소속도 측정 정밀도 향상을 위한 초음파 감쇠 분석
오현택(Hyun-Taek Oh),송성진(Sung-Jin Song),김학준(Hak-Joon Kim),고선필(Sun-Feel Ko),강토(To-Kang),김인철(In-Chul Kim),유지창(Ji-Chang Yoo),정정용(Jung Yong Jung) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.5
고체추진제 연소속도 측정을 위한 초음파법은 한 번의 실험으로 연소속도를 측정할 수 있기 때문에 적용되어 왔다. 하지만 스트랜드버너법을 대체하기 위해서는, 초음파법의 정확성과 신뢰성이 증명되어야 한다. 본 논문에서는 초음파법을 이용하여 측정한 연소속도와 스트랜드버너법으로 측정한 결과의 차이를 비교하였다. 그리고 측정된 연소속도의 분산과 고체추진제의 초음파 감쇠와의 연관성을 조사하였다. Ultrasonic method is applied for measuring burning rates of the solid propellants, since it can measure burning rates as a function of pressure in a single test performed. However, to replace the stand burner method by the ultrasonic method, it is necessary to verify of its accuracy and reliability. In this study, we investigated the performance of the ultrasonic method for burning rate measurements by comparison to the strand burner results. Furthermore, we investigated the relation between the attenuations of solid propellants and data scattering in the measured burning rates.
초음파를 이용한 고체추진제 연소속도 측정 불확실도 평가
강토(To-Kang),송성진(Sung-Jin Song),김학준(Hak-Joon Kim),고선필(Sun-Feel Ko),오현택(Hyun-Taek Oh),김인철(In-Chul Kim),유지창(Ji-Chang Yoo),정정용(Jung Yong Jung) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.5
초음파를 이용한 고체추진제의 연소속도 측정방법은 한 번의 실험으로 넓은 범위의 압력에서 연소 속도를 구할 수 있는 장점이 있다. 하지만, TOF를 이용한 연소속도 측정방법은 압력에 따라 변화하는 초음파의 음속을 이용하여 잔존길이를 구하기 때문에 압력, 비행시간(TOF:Time of Flight), 고체추진제 초기길이에 따른 불확실도에 대한 평가를 하여 신뢰성을 얻어야 한다. 본 연구에서는 초음파를 이용하여 고체추진제의 연소속도를 측정할 때 발생하는 불확실도을 평가하여 고체추진제의 연소속도의 신뢰성을 확보하였다. The advantage of ultrasonic burning rate measurement of solid propellant is measuring burning rates with wide range of pressure in a single test. In the ultrasonic method, instantaneous thickness of solid propellants as function of pressure or time were measured using time of flight(TOF) of ultrasonic signals. So, uncertainties of the measured burning rates by ultrasonic method have to evaluate with variation of pressure, TOF and initial propellant thickness. In this study, we evaluated uncertainties of ultrasonic method for measuring burning rates on the types 317 and the 318 propellants.
초음파를 이용한 다양한 고체추진제의 고압범위까지의 연소속도 측정 정밀도 분석
오현택(Hyun-Taek Oh),송성진(Sung-Jin Song),김학준(Hak-Joon Kim),고선필(Sun-Feel Ko),김인철(In-Chul Kim),유지창(Ji-Chang Yoo),정정용(Jung Yong Jung) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.11
본 연구에서는 서로 다른 연소속도 범위를 갖는 다양한 고체추진제의 연소속도를 고압(~5,000 psia)까지 측정하였고, 측정된 연소속도의 자체적인 편차를 추진제 종류별, 압력별로 분석하여 초음파법의 측정 정밀도를 평가하였다. 또한 스트랜드 버너법을 이용한 연소속도 측정값과 상호 비교하여 두 측정 기법의 특성을 비교해보았다. In this study, we measured burning rates of solid propellants which has various burning rates until 5000 psia, and we evaluated measurement accuracy of ultrasonic method by analyzing error of burning rates. Also, We compared result of burning rates by using ultrasonic method with strand burner method so that characteristics of two measurements method are evaluated.