http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장연수,이창훈,Jang, Yeonsoo,Lee, Changhoon 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.5
One of the effective methods for angular deception against monopulse radar is a cross eye technique. The typical cross eye technique can cause significant angular errors to monopulse radar by using two transceivers which transmit the signals with opposite phases. However, typical cross eye systems have high complexity of implementation because two transceivers should be installed with enough distance on the platform. In this paper, we propose a new cross eye technique with single transceiver based on the multipath effect. Then, angular deception performance of the proposed technique is analyzed.
모노펄스 센서에 대한 크로스 아이 재밍기법의 각도기만 성능 실험
장연수(Yeonsoo Jang),박진태(Jintae Park),이창훈(Changhoon Lee),김인선(In-sun Kim),김기백(Ghiback Kim),조상왕(Sangwang Cho) 한국전자파학회 2018 한국전자파학회논문지 Vol.29 No.2
모노펄스 센서는 수신된 단일 펄스마다 목표물의 각도를 추정한다. 이러한 모노펄스 센서의 각도 추정을 기만하기 위한 방법으로는 크로스 아이 기법이 효과적인 것으로 알려져 있다. 본 논문에서는 크로스 아이 기법의 각도기만 성능을 확인하기 위해 무반향 챔버에 모노펄스 수신 안테나와 크로스 아이 송신기를 이용해 각도기만 시험 환경을 구성한 결과를 소개한다. 그리고 시험 구성을 이용하여 두 개의 크로스 아이 송신기 간격을 변화시키면서 모노펄스 수신 안테나에 인가되는 합 신호와 차 신호의 크기를 측정하고, 그에 해당하는 각도기만 성능을 분석한다. A monopulse sensor is used to estimate the angle of a target with respect to each received single pulse. It is well known that the cross-eye technique can result in an angle deception effect against monopulse sensors. To verify this effect, we propose a test environment configuration for the angle deception using monopulse receiving antennae and cross-eye transmitters in an anechoic chamber. Using the proposed test environment configuration, we have measured powers of the sum and difference of the signals received by the monopulse receiving antennae when the distance of the two cross-eye transmitters is varied. Finally, the angle deception performance related to the powers of the sum and difference signals was analyzed.
사후 정보 값의 부호 변화를 이용한 부분 재전송 방식의 터보 HARQ
장연수(Yeonsoo Jang),윤동원(Dongweon Yoon),현광민(Kwangmin Hyun),이상현(Sanghyun Lee) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.8
대용량 데이터 전송을 위한 무선 통신 시스템에서는 높은 신뢰도를 보장하는 오류 보상 기법이 요구되며, 그러한 기법 중 하나로 재전송 방식과 터보 부호를 결합한 터보 HARQ(Hybrid Automatic Repeat Request) 기법이 여러 문헌에서 연구되어 오고 있다. 기존 터보 HARQ 기법의 경우, 수신 데이터의 일부분이 오류 정정 가능함에도 불구하고 NAK 신호 발생 시에 송신단에서는 정해진 정보 패킷 전체를 반복 전송하게 된다. 이와 같은 과정에서 재전송이 요구되는 정보 패킷 중 필요한 일부만을 송신할 경우 시스템의 전송 효율을 높일 수 있다. 본 논문에서는 전송 효율을 높이기 위한 방법으로 사후 정보 값의 부호 변화를 이용한 오류 데이터 판단 기준 및 부분 재전송 방식을 이용한 터보 HARQ 기법을 제안한다. 제안된 기법에 대한 모의 실험을 통해 전송 효율을 도출하고 성능을 분석한다. Since error compensation schemes guaranteeing high reliability are required in wireless communication systems for the transmission of the large amount of data, as an efficient error compensation scheme the turbo HARQ scheme combining automatic repeat request and turbo coding has been studied in many places in the literature. In the case of conventional turbo HARQ schemes, the transmitter recognizing NAK signals repetitively sends the whole unit packet to the receiver although the received packet can be partially correctable. Through two successive processes, selection of uncorrectable error data and retransmission of only the relevant parts of the information data, transmission efficiency can be improved. In this paper, we present an error data selection criterion for retransmission using the sign transitions of A Posteriori values and propose a tubo HARQ scheme based on the partial retransmission technique. Through a computer simulation, we show and analyze the performance of the proposed scheme with transmission efficiency.
모노펄스 레이더에 대한 전파왜곡 시스템의 요구 성능 분석
장연수(Yeonsoo Jang),김기백(Ghiback Kim),박진태(Jintae Park),이창훈(Changhoon Lee) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.6
모노펄스 레이더에 대한 효과적인 재밍은 전파를 왜곡시키는 것이다. 그 중 대표적인 전파왜곡 기법은 두 개의 송신기를 이용하는 크로스 아이 기법이다. 크로스 아이 기법은 모노펄스 레이더의 구현 구조에 관계없이 각도를 기만할 수 있지만, 충분한 각도기만 효과를 갖기 위해서는 두 송신기의 위상 및 진폭 정확도가 확보되어야 한다. 이러한 위상 및 진폭 정확도는 전파왜곡 시스템을 구현하는데 있어서 핵심적인 요구 성능 파라미터이고, 목표로 하는 각도 오차에 따라 그 요구값이 달라진다. 본 논문에서는 목표하는 각도 오차에 따라 필요한 최소 위상차 및 진폭비를 수식으로 유도하고 그 결과를 분석한다. One of the effective jamming methods to disturb monopulse radars is a wavefront distortion. Most well-known wavefront distortion is the cross eye technique which uses two transmitters. The cross eye can make angle error regardless of monopulse radar structure but high accuracies of phase and amplitude between two transmitters should be needed to make large angle error. Thus, the accuracies of phase and amplitude are essentially required performance parameters for implementation of wavefront distortion systems and the required values of accuracy is dependant on amount of angle error. In this paper, we derive expressions for minimum required values of phase difference and amplitude ratio according to amount of angle error and analyze the results.
달 탐사선의 데이터 고속 전송을 위한 DSP 프로토타입 설계 및 분석
장연수(Yeonsoo Jang),김상구(Sanggoo Kim),조경국(Kyongkuk Cho),윤동원(Dongweon Yoon) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.1
세계 각국은 달 탐사에 대한 연구를 활발하게 진행하고 있으며 우리나라에서도 달 탐사 임무를 수행하기 위한 기초연구가 이루어지고 있다. 성공적인 달 탐사 임무 수행을 위한 통신 시스템의 개발은 달 탐사 프로젝트에 있어서 중요한 부분이다. 본 논문에서는 기저대역 프로세서 개발을 위한 기본 연구로써 달 탐사 통신 랭크에 대한 요구조건 분석을 바탕으로 DSP 프로토타입 시스템을 설계하고 심우주 통신을 위한 국제 표준을 고려하여 각 핵심 모듈을 구현한다. DSP 프로토타입의 비트 오류 확률 값을 컴퓨터 시뮬레이션 결과와 비교함으로써 검증한다. Many countries all over the world have been doing lunar exploration projects. Korea has also been doing basic research on lunar exploration. The development of communication systems for lunar exploration projects is one of the most important aspects of performing a successful lunar mission. In this paper, we design a DSP (Digital Signal Processor) prototype based on the requirement analysis of a communication link for lunar exploration and implement its core module considering the international standards for deep space communications to perform a basic research on baseband processor development. It is verified by comparing the bit error rate of the DSP prototype with that of a computer simulation.