http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
플랜트의 3차원 설계를 지원하는 중립 모델 기반 카탈로그 생성 시스템 개발
이현오(Hyunoh Lee),배연주(Yoenju Bae),권순조(Soonjo Kwon),김병철(Byung Chul Kim),문두환(Duhwan Mun),한순흥(Soonhung Han) 대한기계학회 2018 大韓機械學會論文集A Vol.42 No.8
플랜트 건설 프로젝트에서 플랜트 3D CAD 시스템을 활용하기 위해서는 배관, 부속품, 및 기기 등의 기자재에 대해서 3D 형상, 사양, 및 포트 정보가 포함된 카탈로그가 저장된 라이브러리를 구축해야 한다. 일반적으로 플랜트 3D CAD 시스템의 카탈로그 생성은 수작업으로 이뤄져서 데이터의 오류가 발생할 수 있고 많은 시간과 비용이 소요된다. 따라서 기자재 제작사가 납품하는 일반기자재, 대형기기 및 스키드에 대해서 카탈로그를 생성하는 업무를 지원하는 시스템의 개발이 필요하다. 이 논문에서는 공정 플랜트 산업에서의 카탈로그 구축관련 요구사항에 대해서 분석한다. 그리고 이 요구사항을 충족하기 위해서 대형기기 및 스키드의 형상 단순화 SW 모듈, 일반 기자재 형상 모델링 SW 모듈, 및 형상/사양/포트 정합 카탈로그 생성 SW 모듈로 구성되는 중립 모델 기반 기자재 카탈로그 생성 시스템을 제안한다. In process plant construction projects, a library for equipment and material catalogs should be constructed to support plant design using a plant 3D CAD system. In practice, catalogs are manually generated; this is error-prone and time-consuming. Therefore, developing a system to automatically create catalogs with reduced human intervention is necessary. To accomplish this, we analyze requirements regarding the catalog generation for equipment and materials, large equipment, and skids in the process plant industry. Based on the requirements, we define a catalog generation process, develop a neutral catalog model, and then design a neutral model-based catalog generation system.
홀과 노즐을 고려한 플랜트 기기 스펙-카탈로그 데이터 번역 시스템 개발
이현오(Hyunoh Lee),권혁준(Hyeokjun Kwon),이광(Gwang Lee),문두환(Duhwan Mun) 한국기계가공학회 2020 한국기계가공학회지 Vol.19 No.9
Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.
Eun-seop Yu(유은섭),Hyunoh Lee(이현오),Soonjo Kwon(권순조),Jeong-youl Lee(이정렬),Duhwan Mun(문두환) 한국기계가공학회 2020 한국기계가공학회지 Vol.19 No.7
Three-dimensional (3D) computer-aided design (CAD) models require different levels of detail (LODs) depending on their purpose. Therefore, it is beneficial to automatically simplify 3D CAD assembly models to meet the desired LOD. Feature-based 3D CAD assembly models typically have the lowest and highest feasible limits of LOD during simplification. In order to help users obtain a feasible simplification result, we propose a method to simplify feature-based 3D CAD assembly models by determining the lowest and highest limits of LOD. The proposed method is verified through experiments using a simplification prototype implemented as a plug-in type module on Siemens NX.
플랜트 3D CAD 시스템과 중립 모델 간의 배관 부품 스펙-카탈로그 데이터 번역 시스템 개발
배연주(Yoenju Bae),이현오(Hyunoh Lee),이광(Gwang Lee),문두환(Duhwan Mun),한순흥(Soonhung Han) 대한기계학회 2019 大韓機械學會論文集A Vol.43 No.9
플랜트 건설 프로젝트에서 3D 설계 데이터는 전 생애 주기 동안에 여러 가지 목적으로 사용된다. 그리고 플랜트 3D CAD 시스템은 스펙-카탈로그 기반의 3D 모델링을 방법을 지원한다. 따라서 3D 설계모델에 포함된 스펙-카탈로그 데이터를 다른 응용 시스템과 공유하는 것이 중요하다. 이를 위해서 플랜트 3D CAD 시스템으로부터 스펙-카탈로그 데이터를 추출하여 중립 모델 데이터로 변환해 주는 시스템의 개발이 필요하다. 이 논문에서는 중립 스펙-카탈로그 데이터의 구조를 정의한다. 그리고 고유 스펙-카탈로그 데이터를 중립 스펙-카탈로그 데이터로 변환하는 절차를 제안한다. 그리고 스펙-카탈로그 데이터 변환 절차를 지원하는 프로토타입 변환 시스템을 구현한다. 마지막으로 테스트 모델에 대해서 배관부품의 스펙-카탈로그 데이터를 변환하는 실험을 수행하여 제안한 방법을 검증한다. In a plant construction project, 3D design data is used for various purposes throughout the life cycle. The plant 3D CAD system supports the 3D modeling based on specs-catalogs. It is therefore important to share the speccatalog data contained in the 3D design model with other application systems. For this purpose, it is necessary to develop a system that extracts spec-catalog data from the plant 3D CAD system and converts it into neutral model data. In this paper, we define the structure of neutral specification-catalog data. Then, we propose a procedure to translate the spec-catalog data from native to neutral, and develop a prototype system accordingly. Finally, the proposed method of converting the spec-catalog data of fitting parts is experimentally verified for the test model.
여창모(Changmo Yeo),이현오(Hyunoh Lee),문두환(Duhwan Mun) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
Plant 3D CAD models are used for various purposes during the life cycle of a plant construction project. Various organizations such as EPC companies, equipment manufacturers, and ordering companies participate in the plant construction project. And they share design data in different formats. In the process of exchanging design data, a procedure for exchanging or sharing inappropriate information is performed, resulting in loss of time and money. To prevent this, in the field, a neutral model is used for the efficiency of design information exchange between different organizations. In this study, we propose a method of extracting the main data present in the large plant 3D CAD data input into Autodesk Navisworks and converting it into a neutral model.