http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
높은 압축비에서 운전하는 냉동시스템의 기체 및 액 인젝션의 성능 비교
이대희(Daehui Lee),이정섭(Jungsup Lee),전나영(Nayoung Jeon),이진호(Jinho Lee) 대한설비공학회 2013 대한설비공학회 학술발표대회논문집 Vol.2013 No.6
The economizer vapor injection and liquid injection was applied to the refrigeration system for a stable operation at high compression ratio. The economizer vapor injection and liquid injection has effects on decreasing discharge temperature and increasing total mass flow rate with lower suction temperature and vapor quality due to the cooling effect in compressor, but the excessive liquid inflow into compressor rapidly decreased total mass flow rate. At small injection ratio, the liquid injection has a better performance than vapor injection due to increased total mass flow rate, but At large injection ratio, the performance of liquid injection was significantly dropped by the excessive liquid inflow into compressor and in the absence of internal heat exchanger compared to economizer vapor injection.
이대희(Lee Daehui) 한국정보법학회 2011 한국정보법학회 정기세미나 발표자료 Vol.- No.5
클라우드 컴퓨팅(cloud computing)에 있어서는 이용자가 자신의 개인 컴퓨터(PC)가 아닌 클라우드에 존재하는 컴퓨팅 자원(computing resources)을 이용하는 것을 주된 내용으로 한다. 이용자는 클라우드 서비스제공자가 제공하는 응용프로그램을 이용하여 작업을 하고 그 작업결과를 서비스제공자의 서버에 저장하거나, 클라우드 서비스제공자가 제공하는 툴(tool)을 이용하여 응용프로그램을 작성하고 작성한 프로그램에 바탕을 두어 서비스제공자의 서버를 이용하여 새로운 서비스를 제공할 수 있으며, 심지어 아웃소싱(outsourcing)을 하는 것과 같이 하드웨어나 소프트웨어 등 컴퓨팅을 위한 설비 내지 인프라(infra)를 서비스제공자로부터 아예 서비스의 형태로 제공받아 이용할 수도 있다. 클라우드 컴퓨팅은 개인정보의 보호, 보안, 재판관할권, 계약, 지적재산권 등 많은 법률적 쟁점을 야기시킬 것으로 예상된다. 지적재산권에 있어서도 저작권뿐만 아니라 상표, 영업비밀, 특허 등의 쟁점이 발생할 수 있다. 예컨대 클라우드 서비스 제공과정에서 상표를 키워드(keyword)로 검색한 경우 상표권자와 경쟁하는 자의 광고가 배너형태로 나타나는 경우에는 상표권 침해의 문제, 서비스 이용자가 자신의 영업비밀을 서비스제공자의 서버에 올려놓는 경우 영업비밀의 지위를 상실한 것인지 또는 영업비밀 보호의 문제, 클라우드 컴퓨팅 서비스를 제공하거나 이용하는 과정에서 발생하는 BM(business method) 특허 문제 등이 발생한다. 이 글은 클라우드 컴퓨팅과 관련된 이러한 법률적 쟁점 중 저작권 쟁점을 고찰하는 것을 목적으로 한다. 저작권과 관련하여 발생할 수 있는 가장 일반적인 저작권 문제는 SaaS를 중심으로 하는 소프트웨어 저작권이 될 것이다. 클라우드 컴퓨팅, 특히 SaaS는 이용자들이 희망하는 소프트웨어를 언제 어디서나 이용할 수 있도록 하기 위한 것이고 이를 위해서는 소프트웨어가 다운로드 형태가 아닌 스트리밍 형태 등으로 제공되고 이 과정에서 소프트웨어를 이용자 컴퓨터RAM에 일시적으로 복제하게 된다. 클라우드 컴퓨팅에서는 서비스 제공자도 현행 저작권법이 정의하고 있는 온라인서비스제공자(OSP)가 될 수 있고 저작권 침해책임을 부담할 수 있다. 서비스 이용자가 제공자의 서버에 저작권을 침해하는 자료를 올려놓았을 경우 서비스 제공자는 저작권법이 요구하고 있는 OSP의 의무를 이행하여야 침해책임을 감경받거나 면제받을 수 있게 될 것이다. 클라우딩 컴퓨터 서비스 제공자도 OSP가 될 수 있지만, 현재의 OSP와는 다른 성격을 가지는 서비스 제공자도 존재할 수 있으므로, 클라우드 컴퓨팅을 진작시키기 위해서는 OSP로서의 책임감면을 보다 확대하는 정책적인 노력이 요구된다. 이 글은 클라우드 컴퓨팅에 대한 소프트웨어 저작권 문제와 OSP 책임 문제 이외에도 사적복제, 오픈소스, 소프트웨어 라이선싱, 접근통제 등의 쟁점을 다루는 것을 내용으로 한다. 먼저 이 글은 저작권 쟁점을 파악하기 위해서는 클라우드 컴퓨팅이나 그 서비스를 이해하는 것이 필요하므로 클라우드 컴퓨티의 의미나 서비스 유형을 먼저 고찰하고자 한다. 이 글은 클라우드 컴퓨팅에서 발생할 수 있는 저작권 쟁점을 고찰하는 것이므로 각 쟁점을 옴니버스식으로 고찰하고자 하며, 일정한 쟁점에 대해서는 정책적인 제언을 하고자 한다.
열펌프의 동시 난방 : 급탕 운전에서 용량분배에 관한 연구
장진혁(Jinhyuk Jang),이대희(Daehui Lee),이진호(Jinho Lee) 대한설비공학회 2011 대한설비공학회 학술발표대회논문집 Vol.2011 No.7
In simultaneously heating and hot water operating mode, the experiment of this was carried out with respect to different entering water temperature and water flow rate variation to match the capacity for required actual load between heating and hot water on geothermal heat pump, tested on laboratory scale at water flow rate range for hot water from 10% to 40% and it for heating from -30% to 0% based on water flow rate through condenser. Entering water temperature also was changed from 25℃to 40℃to know influence of load variation for each heating and hot water. The test result represented that the influence of heating is larger than it of hot water with respect to load variation due to a portion of latent heat and the unbalance capacity is clearly shown. Consequently, the water flow rate for hot water can be controlled properly the capacity distribution between heating and hot water according to each load variation
가스 인젝션을 이용한 가변속 왕복동 압축기가 적용된 열펌프의 냉방성능에 관한 연구
장진혁(Jinhyuk Jang),이대희(Daehui Lee),이진호(Jinho Lee) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.5
고온의 외기온도에서 운전되는 열펌프의 냉방 성능향상과 신뢰성 확보는 매우 중요하다. 가스 인젝션 사이클은 냉방능력과 신뢰성 향상을 위해 효과적인 기술이다. 본 연구의 목적은 왕복동 압축기를 사용하는 열펌프에 가스 인젝션 사이클을 적용하여 신뢰성 확보하고, 냉방 성능을 향상 시키는데 있다 가변속 왕복동 압축기와 바이패스 라인에 EEV를 설치하여 운전속도와 바이패스 라인의 EEV 개도율 변화를 통해 운전 특성과 냉방 성능변화를 알아보았다. 이를 통해 압축기 출구 압력과 온도가 각각 최대 36.5%와 52.1%로 하강하였으며, 냉방 COP는 최대 10%가 상승하였다. Vapor injection cycle is used to enhance cooling performance and reliability of heat pump operate under high temperature cooling. The purpose of this study is improving cooling performance and ensuring reliability of heat pump. Gas injection cycle is applied to heat pump with variable speed reciprocating compressor. Operating characteristics and cooling performance of heat pump were discussed on varying compressor frequency and open rate of EEV in bypass line. As a result, compressor exit pressure and temperature were decreased maximum 36.5% and 52.1% respectively and cooling COP is increased maximum 10%.
냉매우회 방법에 따른 물대물 열펌프의 난방 성능 특성에 관한 연구
김장호(Jangho Kim),이대희(Daehui Lee),이진호(Jinho Lee) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
본 연구는 냉매우회 방법에 따른 물대물 열펌프의 난방성능 특성에 관한 연구이다. 본 실험에서 액 냉매우회 방법은 핫 가스 우회방법과 일반적인 방법보다 높은 성능을 나타내었다. 핫 가스 우회방법에서 우회 관의 출구가 증발기 입구 또는 압축기 흡입측 위치에 따라 난방 성능이 변화함을 확인하였다. 그리고 우회밸브의 개도율 변화에 따른 영향을 냉매우회 방법의 따라 난방성능 특성을 분석하고 고찰하였다. 액 우회방법은 일반적인 방법보다 개도율 3%에서 COP 1.2%, 난방 능력 4.8%의 상승을 보이며, 핫 가스 우회방법은 COP 4.2%, 난방 능력 4.2% 감소하였다. The objective of this study is to investigate performance characteristics of water to water heat pump according to bypass method of refrigerant. When liquid bypass is used, heating capacity and COP was increased by increase of suction pressure than that of traditional heat pump. However in hot gas bypass, it was decreased because of mass flow decrease. Performance characteristics of heat pump were discussed on open ratio of bypass valve. Both Cop and heating capacity of liquid bypass were increased about 1.2% and 4.8% than that of traditional heat pump, while hot gas bypass shows.
사각 천장형 루버 디퓨저의 토출 각도에 따른 실내유동에 관한 연구
장헌덕(Heonduck Jang),이대희(Daehui Lee),이진호(Jinho Lee) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.10
The purpose of this paper is to study numerically the characteristics of the indoor air flow of a square ceiling type diffuser according to vane angle and flow rate. The CFX of ANSYS 13.0 was used for the CFD tool. The size of room is 6m(X)×6m(Y)×2.7m(Z). Exhaust diffuser was arranged in diagonal direction to the supply diffuser. This diffuser was designed to have many holes, so supply air have long throw pattern with low velocity decay. The characteristics of the indoor air flow is studied for volume flow rate of 180CFM and 260CFM, and vane angle from 30° to 60°, each 10°.