http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
교류 임피던스 측정법을 이용한 액정의 특성 변화에 관한 연구
안원술 啓明大學校 産業技術硏究所 1997 産業技術硏究所 論文報告集 Vol.19 No.2
교류 임피던스 측정법(AC Impedance Spectroscopy, ACIS)을 이용하여 저분자 액정 중의 하나인 4-cyano-4'-n-heptylbiphenyl(7CB)의 액정 특성을 연구하였다. 온도에 따른 Nyquist plot으로부터 얻은 결과는 DSC 등의 다른 열 분석 연구로부터 얻어진 결과를 잘 일치하였으며, 순수한 7CB는 온도에 무관하게 거의 완전한 반원형 Nyquist plot을 나타내었다. 이러한 결과로부터 7CB 액정은 분자 내의 영구 쌍극자 (permanent dipole)에 의해 나타내는 relaxation time이 한 개뿐이라는 것을 확인 할 수 있었다. 또한 본 연구를 통하여 7CB의 비저항 값은 온도의 함수로 표시될 수 있었으며 30℃에서의 비저항 값은 3.6×10(6)으로서 문헌 치와 잘 일치하는 결과를 얻었다. 한편 resistance나 capacitance 등의 전기적 특성은 액정의 상전이 온도를 전후하여 크게 달라지는 사실로부터 ACIS를 이용한 액정의 상전이 특성의 연구에도 잘 응용될 수 있는 것을 확인하였다. Alternating Current Impedance Spectroscopy (ACIS) was used to characterize a low molecular weight liquid crystal, 4-cyano-4'-n-heptylbiphenyl (7CB). The conductivity or the resistivity of 7CB could be calculated from Re(Z) value along the x-axis of the impedance spectra and the sample dimension. In the nematic temperature range, since the Re(Z) value varied from ca. 0.4×10(6) to 1.8×10(6)Ω the specific resistivity of the 7CB could be calculated to be 3.6×10(9)Ω. cm at 30℃ 1.5×10(9)Ω cm at 40℃, respectively. It is considered that ACIS is also useful for the investigation of phase behavior for a LC, and particularly useful for a heterogeneous system with similar refractive index between the components.
교류 임피던스 측정법을 이용한 고분자/ 액정 블랜드의 상거동에 관한 연구
안원술 啓明大學校 産業技術硏究所 1997 産業技術硏究所 論文報告集 Vol.19 No.2
교류 임피던스 측정법 (AC Impedance Spectroscopy, ACIS)을 이용하여 무정형 고분자인 poly(methyl methacrylate, PMMA)와 저분자 액정4-cyano-4'-n-heptylbiphenyl(7CB) 의 블랜드에 관한 상거동 특성에 관하여 연구하였다. 온도에 따른 Nyquist plot으로부터 resistance나 capacitance 등의 전기적 특성은 블랜드의 상전이 온도를 전후하여 크게 달라지는 사실을 발견하였으며 또한 resonance frequency는 블랜드 내에서의 물리화학적 변화를 연구하는 데 매우 좋은 probe가 됨을 알 수 있었다. 이로부터 ACIS를 이용하여 고분자/액정 블랜드의 상전이 특성을 잘 연구할 수 있을 뿐 아니라 만들어진 PDLC 필름의 품질관리에도 ACIS가 응용될 수 있는 것을 확인하였다. Alternating Current Impedance Spectroscopy (ACIS) to measure the electrical properties of PMMA/7CB blends were utilized to investigate the relationship of electrical property-phase behavior of the blends. There were marked changes of electrical properties including resistance and capacitance near T(NI) and Tcloud for the blends. While resistance change with temperature is remarkable at the higher frequencies, capacitance change is more marked at the lower frequencies. Resonance frequency, fmax, at which -Z" of the blend becomes maximum was a very sensitive probe for the chemical-physical changes within the blends. It was found from the results that ACIS could be directly applied to isolate the system permittivity and resistivity, also well applied to the quality control of device for the practical application.
Formation of the Open-Cell Structured Elastomeric Polyurethane Foams using Metal Salt of 12HSA
안원술 한국공업화학회 2018 한국공업화학회 연구논문 초록집 Vol.2018 No.0
Foaming processes of an elastomeric polyurethane foam having open-cell structures was investigated using a metal salt of 12-hydroxystearic acid as a reactive cell-opening agent. Lithium salt of 12-hydroxystearic acid (Li-12HSA) was properly prepared by the neutralization reaction of lithium hydrate (LiOHㆍH<sub>2</sub>O) with 12-HSA in the presence of silicone base-oil. Heat changes during the foaming process were measured with dynamic DSC. Temperature changes with time was also measured during the foaming in the center position of an open-mold. As the results, An inflection point was observed at about 40 sec after start of foaming process, indicating the formation of effective cell structures which is starting time for the thermal insulation during the foaming process. Rate of temperature changes to reach the peak temperatures increased linearly with Li-12HSA concentrations, showing that Li-12HSA could play a role for a catalyst as well as the cell opening agent.