http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박종민,안도섭,Park, J.M.,Ahn, D.S. 한국전자통신연구원 2001 전자통신동향분석 Vol.16 No.5
새로운 무선 통신 인프라로 크게 부각되고 있는 HAPS(High Altitude Platform Station) 시스템은 국제 표준화 및 기술 기준을 정립하는 국제전기통신연합(ITU)의 최고 의결회의인 세계전파통신회의(WRC)에서 HAPS용 주파수를 분배함에 따라, 선진국을 중심으로 HAPS 상용화를 위한 연구개발이 활발히 진행중에 있다. 특히, 우리나라와 인접한 일본은 정부의 적극적인 지원과 산/학/연의 효율적인 공조 체제를 바탕으로 HAPS 개발과 관련하여 과히 세계 선두 진열에 들어서 있다고 해도 과언이 아니다. 아직 HAPS 개발에 필요한 기술적, 재정적 기반이 부족한 우리나라로서는 이웃한 일본의 연구개발 동향을 항시 주시하고 정확하게 분석한다면 향후 독자적인 연구개발 수행 시 많은 도움이 될 것이다.
우주/지상업무의 주파수 공유 관련 ITU-R 연구 결과 분석 및 향후 대응 방안
박종민,오대섭,안도섭,Park, J.M.,Oh, D.S.,Ahn, D.S. 한국전자통신연구원 2007 전자통신동향분석 Vol.22 No.5
2 500${\sim}$2 690MHz 대역은 전 세계적으로 우주업무와 지상업무가 공동으로 이용하는 대역으로서, 한정된 전파자원의 환경 하에서 이 주파수 대역의 공유 문제가 이슈로 대두되었다. 이와 관련하여 국제전기통신연합의 전파통신부문(ITU-R) 최고 의결 회의인 세계전파통신회의(WRC)에서는 ITU-R로 하여금 이 주파수 대역의 공유를 위한 기술적/규정적 연구를 수행하게 하였고, 이 연구결과를 토대로 2007년 10월에 개최되는 WRC에서 관련 규정을 제/개정할 예정이다. 본 고에서는 ITU-R에서 수행된 주파수 공유 연구 결과, 각 국가/기구의 입장 및 2007년 7월 부산에서 개최된 아/태 지역 WRC 준비그룹의 최종 회의 결과 등을 분석하고 향후 대응 방안을 고찰하였다.
박종민,오대섭,Park, J.M.,Oh, D.S. 한국전자통신연구원 2003 전자통신동향분석 Vol.18 No.5
성층권에 무선중계기지를 구축하여 통신에 이용하는 개념은 이미 오래 전부터 제안되어 왔으나 구현상 기술적 난이도가 높아 그 동안 현실화되지 못했다. 그러나 최근 새로운 통신 서비스에 대한 시대적 요구와 고효율의 태양 전지 및 연료 전지, 고정밀 GPS 항법 시스템과 같은 신기술 개발로 인하여 성층권 비행선을 이용한 무선통신 시스템 구현이 점차 가시화 되고 있으며, 세계전파통신회의(WRC)를 계기로 성층권통신시스템용 주파수가 분배됨에 따라, 선진국을 중심으로 HAPS(High Altitude Platform Station) 상용화를 위한 연구개발이 활발히 진행중에 있다. 특히, 우리나라와 인접한 일본은 정부의 적극적인 지원과 산/학/연의 효율적인 공조 체제를 바탕으로 HAPS 개발과 관련하여 과히 세계 선두 진열에 들어서 있다고 해도 과언이 아니다. 아직 HAPS 개발에 필요한 기술적, 재정적 기반이 부족한 우리나라로서는 이웃한 일본의 연구개발 동향을 항시 주시하고 정확하게 분석한다면 향후 독자적인 연구개발 수행 시 많은 도움이 될 것이다.
박종민(J.M. Park),서성원(S.W. Suh),권영국(Y.G. Kwon),박주범(J.B. Park),김현우(H.W. Kim),김건태(G.T. Kim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
This paper presents a series of processes of designing, manufacturing and testing of AC 22.9㎸ three core XLPE submarine cables with optical fiber unit. To verify the mechanical performance of the submarine cables, CAE (Computer Aided Engineering) method have been applied to structural design of the submarine cable and the corresponding mechanical tests have been performed.
Drilling Characteristics of PVC Materials
J.Y Byun(변재영),Na-Ram Park(박나람),S.W Chung(정성원),S.H Kwon(권순홍),S.G Kwon(권순구),J.M Park(박종민),J.S Kim(김종순),Won-Sik Choi(최원식) 한국기계가공학회 2015 한국기계가공학회지 Vol.14 No.1
This paper develops and evaluates a mechanical machining process which involves drilling on PVS material. According to the material, two treatment experiments were conducted, one involving drilling in a wet condition or using a lubricant and one involving drilling in a dry condition with no lubricant. Drilling in a dry condition showed better performance in terms of the cutting time than in the wet condition. Otherwise, the wet condition has several advantages. The lubricant influenced the burr diameter size and minimized the temperature on the surface of the work piece. During the wet condition drilling process, a smaller burr diameter size was noted as compared to the dry condition. The temperature showed a linear correlation with the drill bit size, where a least-square analysis provided an R<SUP>2</SUP>valuewhichexceeded 0.95. The wet condition required more cutting time than the dry condition. In this condition, the water provides a lubrication effect. A thin layer between the cutting edges and the surface of the work piece is formed. The chip formation is affected by the drilling depth. The color on the tips of the chips was darker than in the initial condition. No correlation between the drilling depth and the bore roughness was noted, but the variation of the cutting speed or the RPM influenced the roughness of the bore. The optimum cutting speed ranged from 40 RPM to 45 RPM in the condition which provided the finest roughness surface.