http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Minimum shear reinforcement ratio of prestressed concrete members for safe design
박민국,이득행,주현진,황진하,최승호,김강수 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.56 No.2
Design codes have specified the minimum shear reinforcement requirement for reinforced concrete (RC) and prestressed concrete (PSC) members to prevent brittle and premature shear failure. They are, however, very different from one another, and particularly, ACI318 code allows the required minimum shear reinforcement to be reduced in PSC members, compared to that in RC members, by specifying the additional equation for PSC members whose basis is not clear. In this paper, the minimum shear reinforcement ratio for PSC members was proposed, which can provide a sufficient reserved shear strength and deformation capacity. The proposed equation was also verified by the test results of PSC specimens lightly reinforced in shear, comparing to design codes and other proposed equations from previous studies.
공공기관 IT 서비스 종합관리 프레임워크 도입의 적정성 연구
박민국,박대하,Park, Min-Kuk,Park, Dae-Ha 서비스사이언스학회 2017 서비스연구 Vol.7 No.3
Recently in information business, managing and auditing are getting more difficult because of enlargement, intellectualization and convergence. In addition, ordering organizations have been having a difficult time choosing a service because not only there is a huge overlap between information audit system and PMO but also the work boundaries of those two are not clear enough. As the demand that a business managing and auditing frame work need to be more developed in terms of independence, quality, economic feasibility and responsibility has been increased, the Korea Association Of Information Systems Audit has been attempting to improve business management and audit system by proposing Unified Project Management Framework whose process is approximately constructed. This study introduces Unified Project Management Framework which is all-encompassing from the ordering at the very beginning of business to the operating in the post-processing step and then verifies its work scope through a comparative analysis with existing management systems. Also, this thesis examines the necessity of unification of audit system and PMO by analysing existing similar systems. At the end, this study, analyses the suitability of Unified Project Management Framework by evaluating it with IT goal frame of COBIT5 which is constructed based on BSC performance management index. The result of the analysis is expected to help people in charge understanding the features of Unified Project Management Framework before they apply it to practical business. 최근 정보화 사업이 대형화, 지능화, 융합화되고 있지만 이를 관리 및 감독하는 정보시스템 감리 제도와 사업관리(PMO) 제도는 업무 범위가 중복되거나 경계가 명확하지 않은 부분이 많아 발주기관의 용역 선정에 어려움이 발생하고 있다. 독립성, 품질성, 경제성, 책임성이 개선된 사업관리 및 감리 프레임워크가 요구되며, 이에 따라 정보시스템 감리협회에서는 대략적인 프로세스가 구조화된 정보화 사업 종합관리 프레임워크를 제안하여 사업관리 및 감리 제도를 발전적으로 개편하려는 움직임을 보인다. 본 논문에서는 사업 초기의 발주활동에서부터 사후단계인 운영활동까지 전 단계에 걸친 정보화 사업 종합관리 프레임워크를 소개하고 기존의 관리제도와의 비교분석을 통해 업무 범위를 확인한다. 또한 기존제도와 유사제도를 분석해 감리제도와 PMO 제도 통합의 당위성을 살펴본다. 최종적으로 BSC 성과관리 지표를 기반으로 구현된 COBIT5의 IT 목표 틀을 평가도구로 활용해 종합관리 프레임워크의 적정성을 분석한다. 분석 결과는 정보화 사업의 담당자들이 종합관리 프레임워크의 실무적인 적용에 앞서 그 특성을 이해하는 데 도움이 될 것으로 기대한다.
스마트 공장 구현을 위한 자재 할당 스케줄링 시스템 개발을 위한 실증연구
박민국,송관배,박재현 대한안전경영과학회 2017 대한안전경영과학회 학술대회논문집 Vol.2017 No.04
Semiconductor processes are mainly divided into FAB process, package and test. The FAB process is promoting smart factories over a long period of time. The situation of the package and test process is manual, but there is a wafer testing process that prepares the latest topic "SmartFactory". The purpose of this study is to study the key variables for the completion of the material allocation scheduling system which will be the base environment of the smart factory in the wafer test process and to build the system based on the designed research model.
스마트 공장 구현을 위한 자재 할당 스케줄링 시스템 개발을 위한 실증연구
박민국,송관배,박재현 대한안전경영과학회 2017 대한안전경영과학회 학술대회논문집 Vol.2017 No.11
Semiconductor processes are mainly divided into FAB process, package and test. The FAB process is promoting smart factories over a long period of time. The situation of the package and test process is manual, but there is a wafer testing process that prepares the latest topic "SmartFactory". The purpose of this study is to study the key variables for the completion of the material allocation scheduling system which will be the base environment of the smart factory in the wafer test process and to build the system based on the designed research model.
프리스트레스트 합성 중공슬래브의 수평전단강도에 관한 실험적 연구
박민국 ( Park Min-kook ),허인욱 ( Heo Inwook ),김재현 ( Kim Jae-hyun ),이윤정 ( Lee Yoon Jung ),김강수 ( Kim Kang Su ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
압출성형 방식으로 생산되는 프리스트레스트 중공 슬래브(prestressed hollow-core slab, PHCS)는 독특한 제작특성으로 인하여 전단연결재의 배치가 쉽지 않으며, 표면에 충분한 거친면 처리를 적용하는 것도 상당히 어렵다. 따라서, 토핑 콘크리트와 함께 합성 슬래브로 적용되는 PHCS에 대하여 수평전단성능 확보를 위한 방법을 모색하고 이에 대한 충분한 평가 및 검증이 필요하다. 이 연구에서는 PHCS와 토핑 콘크리트 사이의 합성계면에 실무에서 적용 가능한 표면처리방식을 도입하여 제작한 실대형 PHCS 합성부재에 대한 휨실험을 수행하였으며, 이와 더불어 수평전단 성능 및 합성거동에 대한 평가도 수행하였다.
프리스트레스트 합성 중공슬래브의 수평전단강도에 관한 실험적 연구
박민국 ( Park Min-kook ),허인욱 ( Heo Inwook ),김재현 ( Kim Jae-hyun ),이윤정 ( Lee Yoon Jung ),김강수 ( Kim Kang Su ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
압출성형 방식으로 생산되는 프리스트레스트 중공 슬래브(prestressed hollow-core slab, PHCS)는 독특한 제작특성으로 인하여 전단연결재의 배치가 쉽지 않으며, 표면에 충분한 거친면 처리를 적용하는 것도 상당히 어렵다. 따라서, 토핑 콘크리트와 함께 합성 슬래브로 적용되는 PHCS에 대하여 수평전단성능 확보를 위한 방법을 모색하고 이에 대한 충분한 평가 및 검증이 필요하다. 이 연구에서는 PHCS와 토핑 콘크리트 사이의 합성계면에 실무에서 적용 가능한 표면처리방식을 도입하여 제작한 실대형 PHCS 합성부재에 대한 휨실험을 수행하였으며, 이와 더불어 수평전단 성능 및 합성거동에 대한 평가도 수행하였다.
프리스트레스트 합성 중공슬래브의 수평전단강도에 관한 실험적 연구
박민국 ( Park Min-kook ),허인욱 ( Heo Inwook ),김재현 ( Kim Jae-hyun ),이윤정 ( Lee Yoon Jung ),김강수 ( Kim Kang Su ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
압출성형 방식으로 생산되는 프리스트레스트 중공 슬래브(prestressed hollow-core slab, PHCS)는 독특한 제작특성으로 인하여 전단연결재의 배치가 쉽지 않으며, 표면에 충분한 거친면 처리를 적용하는 것도 상당히 어렵다. 따라서, 토핑 콘크리트와 함께 합성 슬래브로 적용되는 PHCS에 대하여 수평전단성능 확보를 위한 방법을 모색하고 이에 대한 충분한 평가 및 검증이 필요하다. 이 연구에서는 PHCS와 토핑 콘크리트 사이의 합성계면에 실무에서 적용 가능한 표면처리방식을 도입하여 제작한 실대형 PHCS 합성부재에 대한 휨실험을 수행하였으며, 이와 더불어 수평전단 성능 및 합성거동에 대한 평가도 수행하였다.