http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태리(Taeri Kim),홍지원(Jiwon Hong),박노성(Noseong Park),김상욱(Sang-Wook Kim) 한국정보과학회 2020 정보과학회 컴퓨팅의 실제 논문지 Vol.26 No.3
피싱을 통한 사이버 범죄가 늘어나고 있다. 피싱이 초래하는 피해를 방지하기 위해 콘텐츠 기반, URL 문자열 기반 등 많은 피싱 URL 관련 연구들이 진행되어 왔다. 콘텐츠 기반 방법은 웹 페이지 콘텐츠를 다운로드하고 분석하는 방법으로, 보안상 위험이 따르는 단점이 존재한다. URL 문자열 기반 방법은 URL 문자열 패턴을 분석하고 이를 피싱 URL 탐지에 사용한다. 본 논문에서는 기존 연구로부터 확인된 피싱 URL의 경향에서 착안하여, URL 문자열을 그래프로 구축하고 Random Walk with Restart, Belief Propagation과 같은 그래프 추론 알고리즘과 DeepWalk, Node2vec과 같은 그래프 임베딩 기법을 통해 URL의 피싱 여부를 예측한다. 우리의 그래프 기반 피싱 URL 탐지 방법과 분류 알고리즘을 활용한 기존 피싱 URL 탐지 방법을 비교한 결과, 그래프 기반 방법이 모든 정확도 척도에서 더 높은 성능을 보였다. Cyber crime through phishing is on the rise. To prevent the damage caused by phishing attacks, many studies to detect phishing URLs such as content-based and string-based have been conducted. A content-based method is a method of downloading and analyzing web page content, which poses a security risk. The string-based method analyzes URL string patterns and uses them for phishing URL detection. In this paper, we construct a graph with URL strings based on the phishing URL trends identified from previous studies. And, we detect phishing URLs through the graph-based inference algorithms such as Random Walk with Restart, Belief Propagation, and graph embedding methods such as DeepWalk, Node2vec. As a result of comparing our graph-based phishing URL detection method with the conventional phishing URL detection methods, our method shows better prediction performance in all accuracy measures.
경계면 손상을 고려한 적층복합재료에 대한 멀티스케일 피로 손상 모델
하동원 ( Dongwon Ha ),김정환 ( Jeong Hwan Kim ),김태리 ( Taeri Kim ),주영식 ( Young Sik Joo ),윤군진 ( Gun Jin Yun ) 한국복합재료학회 2023 Composites research Vol.36 No.1
본 논문에서는 복합재료의 섬유와 기지사이의 경계면 손상을 고려한 멀티스케일 점진적 피로 손상 모델을 제안한다. 먼저 점진적인 경계면 손상을 고려하기 위해 서로 다른 4개의 경계면 상태를 정의한 미소구조 모델을 도입하였다. 각각의 상태에 대한 부피분율은 피로 하중의 사이클 수가 증가함에 따라 온전한 상태의 계면에서 완전 박리 상태의 계면으로의 전환이 일어난다. 손상된 경계면의 에쉘비 텐서(Eshelby’s tensor)를 계산하기 위해 선형 스프링 모델이 사용되었으며 균질화 방법을 통해 복합재료의 유효 물성을 얻었다. 또한 복합재료의 피로거동을 묘사하기 위해 교번 응력에 대한 섬유, 기지, 그리고 섬유-기지 간의 계면 각각에 대한 손상 변수들이 정의되었고 이를 chaotic firefly 알고리즘을 통해 손상 변수를 특성화 하였다. 제안된 모델은 유한요소해석 프로그램 ABAQUS의 UMAT subroutine으로 구현되어 AS4/3501-6 복합재료의 단일방향 라미네이트(unidirectional laminate) 시편들([0]<sub>8</sub>, [90]<sub>8</sub>,[30]<sub>16</sub>)을 통해 성공적으로 검증되었다. This paper presents a multi-scale progressive fatigue damage model incorporating the model for interfacial debonding between fibers and matrix. The micromechanics model for the progressive interface debonding was adopted, which defined the four different interface phases: (1) perfectly bonded fibers; (2) mild imperfect interface; (3) severe imperfect interface; and (4) completely debonded fibers. As the number of cycles increases, the progressive transition from the perfectly bonded state to the completely debonded fiber state occurs. Eshelby’s tensor for each imperfect state is calculated by the linear spring model for a damaged interface, and effective elastic properties are obtained using the multi-phase homogenization method. The fatigue damage evolution formulas for fiber, matrix and interface were proposed to demonstrate the fatigue behavior of CFRP laminates under cyclic loading. The material parameters for the fiber/matrix fatigue damage were characterized using the chaotic firefly algorithm. The model was implemented into the UMAT subroutine of ABAQUS, and successfully validated with flat-bar UD laminate specimens ([0]<sub>8</sub>, [90]<sub>8</sub>, [30]<sub>16</sub>) of AS4/3501-6 graphite/epoxy composite.