http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김유창,장은준 대한인간공학회 2008 대한인간공학회 학술대회논문집 Vol.- No.-
본 연구는 주관적 작업부하를 이용하여 쪼그려 앉기 및 무릎 꿇는 자세시 하체서포터가 주는 작업부하(Work Load) 감소 효과에 대하여 조사하였다. 실험조건으로 휴식시간은 유(10s/1min), 무, 작업방법은 하체서포터를 사용한 무릎 꿇기, 무릎 보호대를 사용한 무릎 꿇기, 작업보조도구를 사용하지 않은 무릎 꿇기, 작업보조도구를 사용하지 않은 쪼그려 앉기로 설계하였고, 20대 남자 대학생 및 대학원생 9명을 연구대상으로 선정하였다. 실험 전후의 주관적 작업부하 천이(shift) 값에 대한 분산분석(ANOVA) 결과: 1) 작업방법과 휴식, 신체부위 모두 유의한 것으로 나타났으며(p≤0.05), 2) 윗다리를 제외한 모든 신체부위에서 하체서포터를 사용한 무릎 꿇는 작업방법이 가장 적은 작업부하를 보였다.
김유창 한국안전학회 1999 한국안전학회지 Vol.8 No.4
Korea is becoming an aged society as well developed country. Accident rates of elderly workers are increased. When elderly workers injured, elderly workers are more likely to die as a result, and they take longer to recover than young workers. Thus the cost to industry per individual accident gets higher for elderly workers. If information on the occupational accidents of elderly workers could be collected and analyzed for the purpose of preventing occupational accidents, we would be able to get rid of accidents of elderly workers. The accidents of elderly workers in small manufacturing factories were considered in this study. 97 accidents, which occurred in 1995-1998, were investigated. These accidents were analyzed in terms of sex, work period, cause of accident and form of accident. The accidents of elderly workers in small manufacturing factories are numerous and are often serious and worthy of greater attention than they have received. Successful strategies for accident prevention depend on effective analysis.
VDT증후군 예방을 위한 사무실 작업자들의 VDT 작업조사와 예방대책에 대한 연구
김유창,홍창우 동의대학교 산업기술개발연구소 2005 産業技術硏究誌 Vol.19 No.-
VDT(Visual Display Terminal) workers are increasing relatively according to moving from the manufacturing industry to service industry in industry structure owing to developing an info-communications. Office workers who sit work in front of the VDT for most of working time are exposed to the new risk of industrial accident occurrence such as musculoskeletal disorders, fatigue, visual disability caused the VDT work. Now work related musculoskeletal disorders(WMSDs) are issue in manufacturing industry such as shipbuilding and automobile and studies actively are in progress about it recently. While WMSDs related to the VDT work are approved of only special work, an example, a telephone operator, as industrial accident, systematic studies are short about it. It is expected for WMSDs related to the VDT work to increase rapidly because of spreading the superspeed internet and be a social problem in the future. Therefore, it is necessary to be prepared. In this study, a questionnaire about the status of the VDT work in office workers was implemented and results from that were used as a data to develop a VDT syndrome preventive program in the office work.
김유창,김의창 대한안전경영과학회 1999 대한안전경영과학회 학술대회논문집 Vol.1999 No.11
한국에서는 많은 산업재해로 인해 물질적 손실뿐만 아니라 국가 신뢰도에도 영향을 미치고 있어 선진국이 되기 위해서는 산업재해를 획기적으로 줄여야만 한다. 산업재해 예방을 위해서는 여러 방법 중 각 사업장의 안전관리를 담당하고 있는 산업안전관리자를 좀더 효율적으로 양성할 필요가 있다. 효율적인 안전관리자를 양성하기 위해서는 이들의 교육과목이 체계적으로 연구되어 각 과목들의 상대적 중요성의 분석이 필요하다. 본 논문에서는 이들 교과목의 상대적 중요도를 분석하였고 이의 타당성을 평가하였다. 안전관리자를 위한 상대적 중요도 분석은 AHP(Analytical Hierarchy Process)를 이용하였다. 분석결과 안전관리분야(W=0.355), 인간공학 및 시스템안전분야(W=0.242), 기계안전분야(W=0.13), 건설안전분야(W=0.12), 전기안전분야 (W=0.091), 화공안전분야(W=0.062)순으로 안전관리분야와 인간공학 및 시스템 안전분야의 상대적 중요성이 높게 평가되었다. 이러한 결과는 학교 교과목뿐만 아니라 산업안전공단이나 산업안전협회 등의 안전교육 계획수립 시에도 많은 도움이 될 것이다.
김유창 한국산업경영시스템학회 2001 한국산업경영시스템학회지 Vol.24 No.69
A significant number of all reported accidents in Korea involved education and training Based on the Labor Ministry data, statistics, show the education cause was directly involved in 38% of major accidents, Since safety managers have in charge of safety education at the factory, occupational safety curriculum must be studied to train safety manager effectively. In this study an analysis on relative importance of industrial safety curriculum for a good safety manager was performed by Analytic Hierarchy Process(AHP) The results showed that relative importance of industrial safety curriculum by AHP was safety management(w=0.240) ergonomics and system safety(w=0.201) construction safety(w=0.182) mechanic safety(w=0.139) electronic safety(w=0.134) and chemical safety(w=0.104) in order. The results could be used for industrial safety curriculum planning in university and safety organization such as Korea Occupational safety and Health Agency.
근골격계 질환 예방을 위한 하지의 불균형 작업자세에서 근전도를 이용한 하지근육의 작업부하 평가
김유창,홍창우 대한인간공학회 2008 대한인간공학회 학술대회논문집 Vol.2008 No.10
작업관련성 근골격계 질환은 우리나라 전 산업에 걸쳐서 작업자의 건강 및 경제적인 측면에서 큰 손실을 초래하는 주된 요인이다. 작업자세는 작업자가 다양한 장비를 사용하기 위한 능력과 작업불편, 피로, 근골격계 질환을 느끼지 않고 자신의 작업을 오래 지속할 수 있는 작업시간에 영향을 미치기 때문에 작업방법 및 작업장의 설계에 중요한 관점이다. 우리나라에서 조선 작업, 자동차 조립 작업, 농작업 등 다양한 작업현장에서 작업자들이 쪼그려 앉기를 비롯한 불균형자세를 취한 채 작업을 수행하고 있다. 이런 자세들은 작업관련 근골격계 질환 유발과 상관관계가 있는 것으로 알려져 있다. 부적절한 작업 자세로 인한 근골격계 질환을 예방하고 작업의 생산성을 높이기 위해 작업 자세로 인한 작업 부하를 올바르게 평가하고, 해당위험요인들을 신속하게 찾아서 제거해야 할 필요성이 무엇보다도 중요하다. 따라서 본 연구의 목적은 근골격계 질환의 발생 원인으로 알려져 있는 하지의 불균형 작업자세에 대하여 정적인 작업시간을 고려하여 실험을 진행하였고, 균형과 불균형의 하지 작업자세에서 EMG 실험을 통해 하지 작업과 관련된 신체활동에서 주동근의 역할을 수행하는 6 개 하지근육들의 활동을 평가하였고, 하지자세의 변화에 따라 동원되는 근육의 형태를 파악하고, 근전도 RMS 값의 통계분석(t-tset)을 통하여 작업의 위험성을 제시하고자 하였다.