http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이탁기(T.K. Lee),김흥섭(H.S. Kim),임채환(C.W. Rim),김병현(B.H. Kim),김기섭(K.S. Kim) 한국해양환경·에너지학회 2007 한국해양환경·에너지학회 학술대회논문집 Vol.2007 No.-
연근해를 운항하는 선박의 경우, 선저가 암초 상에 올라앉는 정지형 좌초 (stranding)를 당할 확률이 상대적으로 높다. 손상을 입은 선박의 최종강도는 저하할 것이다. 본 논문에서는 시리즈 붕괴실험을 수행하여 선체구조의 최종강도에 대한 정지형 좌초손상의 영향을 파악하고자 하였다. 단면이 723㎜ × 723㎜이고, 시험체의 길이가 540㎜인 5개의 박스 거더형 모형이 제작되었으며, 각 판 부재에는 종보강재가 부착되어 있다. 5개의 모델 중에는 1개의 비손상 모형과 암초 단면을 이상화한 마름모꼴 손상을 가진 4개의 손상 모형이 있다. 손상 모형 중 3개는 손상부의 판을 잘라 내었으며, 1개는 보다 실제적인 좌초손상을 표현하기 위해 프레스 가공하였다. 최종강도 실험은 순수 굽힘 하중 하에서 수행되었으며, 작용 하중과 선저판의 변위를 계측하였다. 실험 결과, 최종강도는 손상의 크기가 증가할수록 감소하였다. 손상이 선폭의 30%에 이르는 가장 큰 손상 모형의 최종강도는 비손상 모형에 비해 약 21% 정도 감소되었다. 프레스 가공한 손상 모형의 최종강도는 손상부를 잘라 내어 제거한 모형에 비해 낮았다. 이는 프레스 가공한 손상부의 판이 최종강도를 떨어뜨리는 쪽으로 작용한 것으로 생각된다. Ships operating in littoral sea are likely to be subjected to accidental load such as stranding. Once she has damage on the hull structure, her ultimate strength will be reduced. This paper is to investigate the effect of the stranding damage on ultimate strength of ship structure by using a series of collapse tests. For the experiment, 723㎜ × 723㎜ in section 때d 540㎜ in length of five box-girder models with stiffeners were prepared. Of the five, one has no damage and four have an diamond shaped damage which represents the shape of rock section in seabed. The damage size is different between models. Among the damaged models, the damages of 3 of them were made by cutting the plate and one by pressing to represent stranding damage. Experiments were carried out under pure bending load and the applied load and displacements were recorded. The ultimate strength is reduced as the damage size increases, as expected. The largest damaged model has the damage size of 30% of breadth and its ultimate strength is reduced by 21% than that of no damaged one. The pressed one has lower ultimate strength than cut one. This might be due to the fact that the plate around the pressed damage area effect negatively on the ultimate strength.
Incompressible Turbulent Flow Simulation of the Rotor-Stator Configuration
김홍원(H.W. Kim),박원규(W.G. Park),정영래(Y.R. Jung),김기섭(K.S. Kim),문성균(S.G. Moon) 한국전산유체공학회 1995 한국전산유체공학회 학술대회논문집 Vol.1995 No.-
터빈익렬내부의 유동해석을 위해 비압축성 점성유동해석을 이용한 수치 해석 프로그램을 개발하였다. 지배방정식으로는 2차원의 비정상 비압축성 Navier-Stokes 방정식을 일반화된 곡선좌표계로 전환하여 암시적으로(implicitly) 반복적인 시간진행방법을 이용하여 유동해석을 하였다. 지배방정식의 각항들은 시간에 대해 1차의 정확도 그리고 영역에 대해서는 2차의 정확도, 대류항에 대해서는 3차의 정확도를 가지는 Upwind기법을 적용하였다. 특히, 실험적 접근이 매우 어려운 터빈의 정익과 회전하고 있는 동익과의 상호운동을 멀티블럭기법과 데이터 interface를 통해 보다 쉽게 해석할 수 있었다. 본 연구결과는 정익만을 계산한 타 연구자의 결과와의 비교시 매우 일치하였으며 물리적인 유동을 잘 파악 할 수 있었다. 난류유동 해석을 위해서 Baldwin-Lomax 모델을 적용하였다.