http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신뢰도를 요구하는 임베디드 시스템에서의 저전력 태스크 스케쥴링
김경훈,김유나,김종,Kim, Kyong Hoon,Kim, Yuna,Kim, Jong 대한임베디드공학회 2008 대한임베디드공학회논문지 Vol.3 No.1
In this paper, we provide an adaptive power-aware checkpointing scheme for fixed priority-based DVS scheduling in dependable real-time systems. In the provided scheme, we analyze the minimum number of tolerable faults of a task and the optimal checkpointing interval in order to meet the deadline and guarantee its specified reliability. The energy-efficient voltage level at a fault arrival is also analyzed and used in the recovery of the faulty task.
요양급여적정성 평가자료를 이용한 예방적 항생제 사용과 수술부위 감염 발생의 관련성 연구
김경훈,박춘선,장진희,김남순,이진서,최보람,이병란,이규덕,김선민,염선아,Kim, Kyoung-Hoon,Park, Choon-Seon,Chang, Jin-Hee,Kim, Nam-Soon,Lee, Jin-Seo,Choi, Bo-Ram,Lee, Byung-Ran,Lee, Kyoo-Duck,Kim, Sun-Min,Yeom, Seon-A 대한예방의학회 2010 예방의학회지 Vol.43 No.3
Objectives: To examine the prophylactic antibiotic use in reducing surgical site infection. Methods: This was a retrospective study for patients aged 18 years and older who underwent gastrectomy, cholecystectomy, colectomy, cesarean section and hysterectomy. The data source was quality assessment data of the Health Insurance Review & Assessment Service gathered from medical records of 302 national hospitals. Prophylactic antibiotic use was defined as: timely antibiotic administration or inappropriate antibiotic selection. We performed hierarchical logistic regression to examine the association between prophylactic antibiotic use and surgical site infection with adjustment for covariates. Results: The study population consisted of 16 348 patients (1588 gastrectomies, 2327 cholecystectomies, 1,384 colectomies, 3977 hysterectomies and 7072 cesarean sections) and surgical site infection was identified in 351 (2.1%) patients. The rates of timely antibiotic administration and inappropriate antibiotic selection varied according to procedures. Cholecystectomy patients who received timely prophylactic antibiotic had a significantly reduced risk of surgical site infection compared with those who did not receive a timely prophylactic antibiotics (OR 0.64, 95% CI=0.50-0.83), but no significant reduction was observed for other procedures. When inappropriate prophylactic antibiotics were given, the risk of surgical site infection significantly increased: 8.26-fold (95% CI=4.34-15.7) for gastrectomy, 4.73-fold (95% CI=2.09-10.7) for colectomy, 2.34-fold (95% CI=1.14-4.80) for cesarean section, 4.03-fold (95% CI=1.93-8.42) for hysterectomy. Conclusions: This study examines the association among timely antibiotic administration, inappropriate antibiotic selection and surgical site infection. Patients who received timely and appropriate antibiotics had a decreased risk of surgical site infection. Efforts to improve the timing of antibiotic administration and use of appropriate antibiotic are needed to lower the risk of surgical site infection.
Sol-Gel 법을 이용한 칼슘-알루미네이트계 전자화물 박막의 제조와 특성
김경훈,박주석,채재홍,서원선,소성민,김태관,김형순,이병하,Kim, K.H.,Park, J.S.,Chae, J.H.,Seo, W.S.,So, S.M.,Kim, T.K.,Kim, H.S.,Lee, B.H. 한국결정성장학회 2010 한국결정성장학회지 Vol.20 No.6
Sol-gel법을 적용하여 $12CaO{\cdot}7Al_2O_3$(C12A7) 전자화물 박막을 제조하기 위해 CaO-$Al_2O_3$ sol을 제조하여 dip 코팅법을 적용하여 quartz 기판에 박막을 형성하였으며 열처리를 통해 C12A7의 박막을 제조하였다. C12A7 상의 형성 $800^{\circ}C$에서 시작되었고 $1,200^{\circ}C$ 온도에서 1시간 열처리를 통해 치밀화된 박막을 제조할 수 있었다. 제조된 C12A7 박막은 부도체였지만 수소 환원 분위기 열처리를 통해 전기전도도를 나타내기 시작했으며 $1,200^{\circ}C$ 48시간 열처리 시 120 S/cm의 전기전도도를 나타내었다. The Calcium-aluminate electride thin films on the quartz substrates was coated by sol-gel process. The crystallization of the C12A7 thin film was observed at $800^{\circ}C$ and high density C12A7 thin film was achieved on heat treatment at $1,200^{\circ}C$ for 1 hour. The reduction heat treatment of C12A7 thin film could be converted from insulator to conductor and the electrical conductivity was 120 S/cm in the C12A7 thin film heat treated at $1,200^{\circ}C$ with $H_2$ gas for 48 hours.
고속 웹 이송속도 및 복잡한 롤 패턴 형상을 고려한 R2R공정에서의 잉크전달 특성 해석
김경훈,김소희,나양,Kim, Kyung-Hun,Kim, So-Hee,Na, Yang 한국반도체디스플레이기술학회 2010 반도체디스플레이기술학회지 Vol.9 No.2
Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.
김경훈,정종규,원종진,정재일,Kim, Kyounghoon,Jeong, Jongkyu,Won, Jongjin,Jeong, Jayil 한국자동차안전학회 2012 자동차안전학회지 Vol.4 No.1
본 논문은 듀얼클러치 변속기 변속 메커니즘 개발을 위한 동역학적 시뮬레이션 해석 및 피로수명 해석에 관한 연구이다. 캠을 이용한 쉬프트 포크의 이송으로 기어를 변속하는 개념을 갖는 쉬프트 메커니즘의 작동성 및 설계안 검증을 위해 캠의 회전 속도, 접촉면의 경계조건 및 싱크로나이저 슬리브에서의 저항을 반영한 모델링을 구성하여 동역학적 시뮬레이션을 실시하였다. 각 파트의 응력 및 변형률 발생을 해석하여 설계 개선안을 도출하고, 개선안이 반영된 최종 시작모델의 시뮬레이션 상 최대 응력 발생 시점에서 시프트 포크의 각 접촉면 별 외력 작용을 분석하여 이를 적용한 피로 해석을 진행하였다.
방전플라즈마 소결법을 이용한 고밀도 탄화 붕소 제조 및 기계적 특성
김경훈,채재홍,박주석,김대근,심광보,Kim, Kyoung-Hun,Chae, Jae-Hong,Park, Joo-Seok,Kim, Dae-Keun,Shim, Kwang-Bo 한국결정성장학회 2007 한국결정성장학회지 Vol.17 No.3
방전플라즈마 소결법을 적용하여 탄화붕소 세라믹스를 제조하여 그 소결 특성, 미세 구조 및 기계적 특성을 평가하였다. 탄화붕소의 소결에 방전플라즈마 소결법을 적용하여 소결 조제의 첨가 없이 전통적인 소결법보다 낮은 온도에서 99% 이상의 완전 치밀화된 소결체를 제작할 수 있었으며, 탄화붕소 분말의 메탄을 세척을 통하여 분말 표면에 형성되어 있는 $B_2O_3$ 상을 사전에 제거함으로써 결정립의 조대화를 방지하여 균일한 미세구조의 형성을 유도할 수 있었으며 결과적으로 탄화붕소 소결체의 기계적 특성을 향상시킬 수 있었다. 특히 파괴인성의 경우 메탄을 세척을 통하여 30% 이상의 물성 향상을 달성하였다. [ $B_4C$ ] ceramics were fabricated by spark plasma sintering process and their sintering behavior, microstructure and mechanical properties were evaluated. Relative density of $B_4C$ ceramics were obtained by spark plasma sintering method reached as high as 99% at lower temperature than conventional sintering method, in addition, without any sintering additives. The mechanical properties of $B_4C$ ceramics was improved by a methanol washing process which can be removed $B_2O_3$ phase from a $B_4C$ powder surface. This improvement results ken the formation of homogeneous microstructure because the grain coarsening was suppressed by the elimination of $B_2O_3$ phase. Particularly, fracture toughness of the sintered specimen using a methanol washed powder improved over 30% compared with the specimen using an as-received commercial powder.