http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강희진,박기옥,이요셉,소재현,윤일수,Kang, Heejin,Park, Giok,Lee, Yospeh,So, Jaehyun,Yun, Ilsoo 한국자동차안전학회 2021 자동차안전학회지 Vol.13 No.4
The event data recorders (EDR) have been used as a device to help understand traffic accidents. With the recent development of autonomous vehicle (AV), it has become important to prepare the new EDR for AV. Therefore, the purpose of this study is to propose the direction of EDR-AV recording. First of all, the recent EDR data elements and the data elements of AV under discussion at UNECE WP29 EDR/DSSAD (Data Storage System for Automated Driving) were analyzed. The consumer complaint database in Motor Vehicle Recall Center in Korea was analyzed in order to utilize cases of domestic traffic accidents related to advanced driver assistance systems (ADAS). Consequently, problems with existing EDR were identified through unclear accident cases related to ADAS. In the future, it was proposed to record images in which the ADAS perception systems recognize the surroundings of the accident site as an EDR-AV recording item.
천연가황고무의 열경화에 따른 경도 및 물성치, 피로수명 변화
강희진(Heejin Kang),최재혁(Jaehyuck Choi),강한보(Hanbo Kang),정현용(Hyunyong Jeong),이태수(Taesoo Lee) 한국자동차공학회 2002 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2002 No.5_3
Naturnl vulcanized rubber is one of the mostly used materials in industry because of its hyper-elasticity and large deformability. However, the material properties of rubber slowly change and rubber become brittle as time goes on. So, it is imponant to predict the mechanical behavior and futigue life of aged rubber material. Thus, in this paper rubber specimens were heat-aged to accelerate the aging process, and hardness of rubber (IRHD) was proposed to use to indicate the amount of the aging process. In addition, the mechanical properties and futigue life of heat-aged specimens were obtained. Then, the material properties and futigue life of heat aged vulcanized rubber specimens were obtained and represented as a function of IRHD.
강희진(Heejin Kang),최상민(Sangmin Choi),양원(Won Yang),조병국(Byungkook Cho) 한국연소학회 2010 KOSCOSYMPOSIUM논문집 Vol.- No.41
The Operational conditions influence the quality and productivity of sintered ore in an iron ore sintering process. To utilize the coke combustion with adequate heat supply in the bed, various operational parameters are required to be considered. In this study, additional oxygen supply with adjustment of injection locations is investigated by previously developed unsteady 1-dimensional model of an iron ore sintering bed. The numerical model is expanded to reflect the partially oxygen enriched combustion concept, and experimental results are employed to verify the simulations. To evaluate the change of sintering process, quantitative parameters are applied to the calculation results and the combustion characteristics are analyzed in terms of proper heat supply with completion of sintering process
사고분석 사례를 통한 사고기록장치 개선방안에 대한 고찰
박기옥,강희진,전준호,김희준,Park, Giok,Kang, Heejin,Jun, Joonho,Kim, Heejune 한국자동차안전학회 2021 자동차안전학회지 Vol.13 No.4
This study was initiated to improve of the defect investigation method using event data recorders (EDR) and suggested a solution through the regulation and system analysis of EDR. The EDR data has been used for various purposes such as the vehicle defect investigation and the traffic accident investigation. However the EDR regulation has not been updated since the implementation in 2012. "Trigger Threshold" can be used to analyze a single accident such as the frontal crash, the side crash, and the rollover. In the case of a complex accident in which a rollover accident and a crash accident occur simultaneously, it is difficult to analyze a complex accident due to current "Trigger Threshold". This study proposed the method of separating the "Trigger Threshold" into a crash accident and a rollover accident so that accidents can be analyzed using the EDR data even when a complex accident occurs. In addition, it proposed the improvement method to quickly use the data of EDR in accident reconstruction software.
MSG공법에 의한 PRD강관말뚝 보강에 관한 사례 연구
천병식(Chun Byungsik),강희진(Kang Heejin),공진영(Kong Jinyoung) 한국지반환경공학회 2007 한국지반환경공학회논문집 Vol.8 No.6
이암은 건조 조건에서는 일정한 강도와 강성을 가지나, 지하수 침투 등에 의한 습윤, 포화 시 고유의 강도 및 강성이 저하되어 급속히 풍화되는 특성을 가지며, 포항지역에서 자주 발생하는 절취사면의 활동은 주로 이암이 풍화되어 전단강도가 급격히 저하되는 것으로 볼 수 있다. 본 연구는 시추조사시 강성이 충분한 것으로 평가된 이암층에 PRD강관말뚝을 시공한 후 정재하 시험을 실시한 결과 소요지지력이 부족하여, 이를 보강하기 위한 가장 우수한 방법을 찾기 위하여 여러 가지 공법을 검토하였다. 말뚝지지력 증대에 가장 효과적인 방법을 찾기 위해 말뚝주변 및 선단부에 MSG공법, 마이크로파일 보강후 주변그라우팅공법, 선단보강 그라우팅 및 콘크리트 속채움 등의 방법으로 시험시공을 실시하였고, 시험말뚝에 대한 정재하시험 결과 MSG공법으로 보강한 말뚝의 지지력이 가장 우수함을 알 수 있었다. Mudstone has characteristics that it has high enough strength and stiffness in a dry condition, but the strength and stiffness decrease in a wet condition with groundwater infiltration. The sliding of cut slope frequently encountered in Pohang area has been reported due to the rapid reduction of shear strength in mudstone after being exposed to the air. The study in this paper shows that mudstone having enough strength in a boring stage has lost the strength after installing PRD (percussion rotary drill) steel pipe pile inducing an insufficient bearing capacity. Field test has been performed to investigate the most favorable method for increasing a pile bearing capacity in mudstone with various methods such as MSG (Micro Silica Grouting) around the tip and side of a pile, the perimeter grouting combined with Micro pile reinforcement, and concrete filling after tip reinforcing grouting. MSG has been turned out to be the most favorable method for increasing a pile bearing capacity in mudstone, confirmed by the static load test.
이승주 ( Seungjoo Lee ),강희진 ( Heejin Kang ),임현택 ( Hyuntaek Lim ),김기환 ( Jihuan Jin ),김용성 ( Yongseong Kim ) 한국농공학회 2019 한국농공학회 학술대회초록집 Vol.2019 No.-
국내 저수지 보강 방법으로는 그리우팅공법이 주로 사용되어 왔다. 누수가 심한 제체를 보통포틀랜드시멘트를 이용하여 차수보강 하고 있으나 미세한 틈새나 토립토가 작은 공극에서는 주입이 어렵고 지반이 맥상 혹은 할렬주입이 되기도 하며 제체를 융기시키면서 주입되는 취약점이 있다. 약액주입방법으로 규산소다를 경화재로 사용하지만 제체를 따라 유동하는 물에 의한 용탈함으로 내구성이 저하되는 단점이 있다. 그라우팅공법은 주입재의 재료적 한계로 인한 여러 문제점이 제기되어 왔으며, 이를 해결하기 위하여 다양한 그라우트 재료들을 개발하여 현장에 적용하고 있으나 침투주입시 원지반이 교란되는 문제가 발생하는 경우가 많다. 본 연구에서는 침투성능이 우수한 재료인 초미립자시멘트와 팽창제를 사용하여 지반의 다짐효과를 발현시킬 수 있는 팽창압을 이용한 시공방안을 제안하고, 현장시험과 실내시험을 통해 실효성을 검토하였다. 실내실험을 통해 그라우트재의 환경 및 물리적 특성을 분석하였으며, 팽창제와 그라우트재를 혼합하여 부피팽창에 따른 다짐효과와 압력을 분석하였다. 또한 현장시험시공을 실시하여, 전기비저항탐사를 이용한 간접평가기법으로 그라우팅 보강효과를 분석하였다. 지반 교란을 최소화하여 침투주입을 실시할 수 있는 분말도 8,000㎠/g이상의 초미립자시멘트와 침투주입 후 일부 원지반 교란이 발생될 경우 팽창제를 이용하여 주입재의 팽창효과를 2차적으로 발생시켜 원지반을 다짐할 수 있는 침투 다짐그라우팅 재료 특성 및 차수보강 효과에 대해 고찰하였다. 본 연구를 통해 제시된 침투다짐그라우팅 시공방법은 노후저수지 성능개선 및 유지보수를 통한 시설안정화 사업에 중요한 방재기술을 위한 기초연구자료로 활용될 수 있을 것으로 판단된다.