http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강경신 ( Kang Kyeong-sin ),양승조 ( Yang Sung-cho ),박재형 ( Bark Jai-hyeong ),이재승 ( Lee Jae-sung ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
최근 건축물의 대형화, 고층화됨에 따라 합성구조를 많이 사용하고 있으나 이러한 합성구조에 사용되는 강재의 경우 화재에 의한 온도 상승시 강도가 급격히 저감되는 특징을 갖고 있다. 이에 따라 내화성능 확보를 위한 내화공법이 필수적이나 기존 합성구조에 사용되는 내화공법 중 내화페인트의 경우 3시간 내화성능 확보가 어렵거나 가격이 매우 고가이며, 내화뿜 칠재의 경우 비산현상, 습식 작업에 의한 열악한 작업환경 및 시공지연 등 많은 문제점들이 제기되고 있다. 본 연구에서는 이러한 작업을 개선하고자 클래딩 기둥 시스템에 대한 실대형 내화실험을 수행하였다.
강경신 ( Kang Kyeong-sin ),박재형 ( Bark Jai-hyeong ),이재승 ( Lee Jae-sung ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
최근 급속한 경제성장과 산업화가 촉진됨에 따라 계절과 관계없이 고농도 미세먼지와 초미세먼지가 형성되고 2차 화학반응 물질들이 발생하여 인체에 악영향을 미치는 사례가 보고되고 있다. 이러한 물질들에 장기간 노출될 경우 면역력이 급격히 저하되어 감기, 천식, 기관지염 등 호흡기 질환 및 각종 징별에 노출될 수 있다. 이를 해결하기 위해 정부에서는 2008년 이후 100세대 이상 신축건축물에 환기시스템 설치를 의무화 하고 있으나, 다가구주택 및 공공기관 같이 공간이 협소하거나 인원이 많이 모이는 곳의 환기시스템 설치가 미흡한 상황이다
외단열 화재확산방지구조 적용에 따른 수직화재확산 성능평가에 관한 연구
강경신(Kang, Kyeong-Sin),이재승(Lee, Jae-Sung),김흥열(Kim, Heung-youl),채승언(Chae, Seung-Un),유지선(You, Ji-Sun) 대한건축학회 2023 대한건축학회논문집 Vol.39 No.12
With the recent strengthening of fire performance standards for building finishing materials, external wall finishing materials for buildings over 3 floors or over 9 m must meet the performance of semi-non-combustible materials and pass the KS F 8414 performance standards. But in the case of buildings under 5 stories or under 22 m, it is stipulated that flammable insulation can be used when the finishing materials satisfy the performance of combustible materials or applies a fire spreading prevention structure. In this study, fire performance was evaluated on two specimens that applied fire spreading prevention structures to combustible and semi-non-combustible materials. And both test specimens satisfied the KS F 8414 performance standards. It is necessary to apply the performance evaluation criteria of KS F 8414 differently depending on the number of floors and height or combustibility of the materials. As the number of floors and heights of some buildings overlapped and applied differently, it is believed that there is a need to subdivide and revise the performance evaluation standards for external wall finishing materials.
유지선 ( Ji-sun You ),강경신 ( Kyeong-sin Kang ),이재승 ( Jae-sung Lee ),정영진 ( Yeong-jin Chung ) 한국공업화학회 2023 공업화학 Vol.34 No.4
Polymethyl methacrylate (PMMA), polycarbonate (PC), polyvinyl chloride (PVC), 그리고 polyacetal을 포함하는 일부 플라스틱류에 대한 연기특성을 조사하였다. 연기밀도는 ISO 5659-2의 기준에 의해 연기밀도시험기를 이용하여 정적인 연기 특성의 관련 값을 측정하였다. 또한 불꽃을 동반하는 연소와 불꽃을 동반하지 않는 연소를 구분하여 측정하였다. 불꽃방식의 복사열 50 kW/m<sup>2</sup>의 조건하에서 연기의 최대비광학밀도(D<sub>m</sub>) 측정값은 PMMA (401.26)가 최저로, PVC (1345.04)가 최대로 나타났다. 또한 비불꽃방식의 복사열 50 kW/m<sup>2</sup>의 조건하에서 연기의 D<sub>m</sub> 측정값은 PMMA (262.82)가 최저로, PVC (1385.43)가 최대로 나타났다. 대상물의 연소 시 연기발생은 복사열 유속의 영향을 상당히 받으며, 탄화성 플라스틱은 연소 시 비탄화성 플라스틱보다 높은 연기 발생량을 나타내었다. 주 고분자 사슬에 방향족 그룹이 있는 폴리머는 열분해로 인해 다량의 숯이 생성되므로 다량의 연기를 발생시켰다. The smoke properties of some plastics were investigated, including polymethyl methacrylate (PMMA), polycarbonate (PC), polyvinyl chloride (PVC), and polyacetal. For smoke density, related values of static smoke characteristics were measured using a smoke density tester according to ISO 5659-2. In addition, combustion with and without flame was measured independently. Under the condition of radiant heat of 50 kW/m<sup>2</sup> using the flame method, the measured value of the maximum specific optical density (D<sub>m</sub>) of smoke showed the lowest value for PMMA (401.26) and the highest value for PVC (1345.04). In addition, PMMA (262.82) was the lowest and PVC (1385.43) was the highest in the measured D<sub>m</sub> of smoke under the condition of radiant heat of 50 kW/m<sup>2</sup> in the non-flame method. Smoke generation during combustion of the object is significantly affected by the radiant heat flux, and carbonizable plastics showed a higher amount of smoke than non-carbonizable plastics during combustion. Polymers with aromatic groups in the main polymer chain generated a large amount of smoke because a large amount of char was generated due to thermal decomposition.