http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Damage detection for beam structures based on local flexibility method and macro-strain measurement
Ting Yu Hsu,Wen I Liao,Shen Yau Hsiao 국제구조공학회 2017 Smart Structures and Systems, An International Jou Vol.19 No.4
Many vibration-based global damage detection methods attempt to extract modal parameters from vibration signals as the main structural features to detect damage. The local flexibility method is one promising method that requires only the first few fundamental modes to detect not only the location but also the extent of damage. Generally, the mode shapes in the lateral degree of freedom are extracted from lateral vibration signals and then used to detect damage for a beam structure. In this study, a new approach which employs the mode shapes in the rotary degree of freedom obtained from the macro-strain vibration signals to detect damage of a beam structure is proposed. In order to facilitate the application of mode shapes in the rotary degree of freedom for beam structures, the local flexibility method is modified and utilized. The proposed rotary approach is verified by numerical and experimental studies of simply supported beams. The results illustrate potential feasibility of the proposed new idea. Compared to the method that uses lateral measurements, the proposed rotary approach seems more robust to noise in the numerical cases considered. The sensor configuration could also be more flexible and customized for a beam structure. Primarily, the proposed approach seems more sensitive to damage when the damage is close to the supports of simply supported beams.
Prevalence of Musculoskeletal Symptoms in Taiwan's Traditional Industries
Yu, Chi-Yuang,Hsu, Yau-Wen,Chung, Yi-Chan,Tsai, Chih-Hung The Korean Society for Quality Management 2004 The Asian Journal on Quality Vol.5 No.2
The purpose of this study was to analyze the prevalence of self-reported musculoskeletal symptoms among the three Taiwan's traditional industries as lathe, electronics and food by the Nordic Musculoskeletal Questionnaire (NMQ). Moreover, the study was also to make a comparison among the aforesaid industries for revealing their differences. The result of the questionnaire indicated that the symptoms appeared on the three industries were all originated from four parts as neck, shoulders, elbows, and wrists/hands. More than 68% of the interviewers thought that their symptoms might be related to their work. However, the rate of harmful influence resulted from life or job was over 50%. As to the respect of the interviewers' attitude in treating their symptoms, more than 80% of them neglected or just treated the symptoms by massaging or cold/hot compressing and resting. From the questionnaire, the proportion of symptoms discussed in each item indicated that the distribution, in perceiving symptom, of interviewers were not quite identical; however the Chi-square test discovered majority did not reach 0.05 levels, hence the difference among industries were not significant.
The Compensation of Machine Vision Image Distortion
Chung, Yi-Chan,Hsu, Yau-Wen,Lin, Yu-Tang,Tsai, Chih-Hung The Korean Society for Quality Management 2004 The Asian Journal on Quality Vol.5 No.1
The measured values of a same object should remain constant regardless of the object's position in the image. In other words, its measured values should not vary as its position in the image changes. However, lens' image distortion, heterogeneous light source, varied angle between the measuring apparatus and the object, and different surroundings where the testing is set up will all cause variation in the measurement of the object when the object's position in the image changes. This research attempts to compensate the machine vision image distortion caused by the object's position in the image by developing the compensation table. The compensation is accomplished by facilitating users to obtain the correcting object and serves the objective of improving the precision of measurement.
Research on Using Six Sigma Tool to Reduce the Core Process Time
Chung, Yi-Chan,Yen, Tieh-Min,Hsu, Yau-Wen,Tsai, Chih-Hung,Chen, Ching-Piao The Korean Society for Quality Management 2008 The Asian Journal on Quality Vol.9 No.1
When facing the global severe competition, the enterprises all try their best to upgrade the quality, reduce the costs to reach the goal of customer satisfaction. Motorola was the earliest firm creating the term Six Sigma (6 ${\sigma}$); GE was the enterprise successfully fulfilling Six Sigma. The success of these two firms revealed the prominent effects and became the world-class model enterprises. The main purpose of promoting Six Sigma activity was to reduce the possible defects in the business process to the least through designing and monitoring business process in order to reach the goals such as the best quality and efficiency, the lowest costs, the shortest circular process time, maximum profits and customer satisfaction. This research used the Six Sigma technique to improve the business process of ceramics manufacturing plant and find out the major factors of slower core task time by the analytical process of Process Mapping, Pareto Chart, Simu18 simulation software and figures and proposed the improvement measures. Through the confirmation of the case companies, it successfully reduced the core process time and the organizational costs and increased the capacity.
Research on the Operational Performance of ISO 14000-Certified Taiwan's Manufacturers
Chung, Yi-Chan,Tsai, Chih-Hung,Hsu, Yau-Wen The Korean Society for Quality Management 2005 The Asian Journal on Quality Vol.6 No.1
This research topic evaluates the effectiveness and importance of environmental protection in the 21st century in light of the increasing demand on the earth's natural resources and the pressures on economic and industrial development to provide dynamic power. As the world and our fellow citizens become more conscious of environmental protection, companies are under greater pressure whilst pursuing economic growth. Therefore, domestic manufacturers have been devoting efforts to promote environmental management. This research conducts survey using questionnaires on the operational performance of the manufacturers who have ISO 14000 series accreditation and certification. The survey considers five dimensions/functions within a manufacturer, financial management, human resources management, production management, and marketing management. A total of 35 indices are used for analysis of the effects that the location, history, industry, number of employees, amount of capital, and revenue may have on the performance. This research targets the manufacturers approved of ISO 14000 series certification by Environment Administration Association. The statistical methods deployed are descriptive statistics, T-test, and single factor analysis of variance used for analysis. The conclusions reveal that a certain level of performance has been achieved in every dimension. After T-test, all the indices have reached a significant level. The indications are that ISO 14001 benefits all manufacturers the level of benefits however varies from company to company.