http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이석운 전남대학교 산업대학원 1998 국내석사
본 연구는 철강업제로부터 발생하는 페 마그네시아 카본 연와의 재활용을 위해 물성과 연소 특성을 조사하였다. 시료는 MgO 크링커와 MgO분말 및 카본으로 형성되어 있으며, 약 25%의 휘발율을 나타냈다. 잔류물의 주성분으로는 MgO 92.12%, A1₂O₃6.17%이었다. 시차열분석결과 반응온도 523℃에서는 바인더의 휘발과 789℃에서 카본의 연소에 의한 발열피크를 볼 수 있었다. 어트리션밀에 의한 분쇄에서 볼과 코링커가 서로 마찰함으로서 크링커 회수에 효과적이였다. 반응온도에 따른 영향으로 반응온도 900℃에서 연소율이 71.5%인 반면에 1,050℃ 이상으로 상승하였을 때 98%이상의 연소율을 나타냈다. 공기량을 250cc/min으로 증가시키면 동일조건에서 80%로 2배의 연소율을 얻을 수 있었으며, 400cc/min으로 증가하면 96%의 연소율을 나타냈다. 접촉시간을 15min으로 할 때 63%의 연소율을 얻을 수 있는 반면에 60분으로 증가시키면 98%이상의 연소율을 얻을 수 있었다. 입도별 연소특성으로는 크링커를 많이 함유한 -4.75mm/+850㎛범위에서 평균 20%미만의 연소율을 나타냈으며 -9.5mm/4.75mm와 150㎛이하의 범위에서는 매우 높은 연소율을 나타냈다. This study was carried out to investigate the characteristics of physico-chemical and combustion of wastes magnesia carbon brick which was generated from steel work industries. The samples were composed of clinker and powder of magnesia, and graphite. It showed that the volatilization rate of the sample was 25% at 1000℃ and the remained oxide by volatilization were 92.12% of MgO and 6.17% of Al₂O₃. By the TG-DTA analysis, the binder was volatilized at 523℃ and the exothermic peak of graphite by combustion was shown at 789℃. The clinker was effectively recovered by attrition mill process being made friction with clinker and ball matrix each other. As the effect of reaction temperature, the combustion rate of at 900℃ was 71.5%, however, up to increased at 1050℃ was shown 98%. In other to clarify the effect of air inflow, when the increased of air inflow to 250cc/min as same conditions, the combustion rate was 80% as 2times and 96% of 400cc/min. When the contact time at 15min, the combustion rate was 63% but goes up to 98% at 60min. As the characteristics of particle size, -4.75mm/+850㎛. was 20% of combustion rate due to contained of clinker mainly. However, -9.5mm,4.75mm and under 150㎛ of particles were shown higher combustion rate due to contained the aggregated fine particles of magnesia and graphite.