폐기물 매립지 침하에 대한 공학적 특성 분석은 매립지 설계시나 사용종료된 매립지의 활용에 중요하다. 폐기물 매립지의 침하는 전형적인 토질역학적 거동과는 상이하며, 폐기물 침하는 ...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=T10036501
서울 : 東國大學校 大學院, 2003
2003
한국어
532.3 판사항(4)
서울
77p. : 삽도 ; 26cm.
참고문헌: p. 75-76
0
상세조회0
다운로드폐기물 매립지 침하에 대한 공학적 특성 분석은 매립지 설계시나 사용종료된 매립지의 활용에 중요하다. 폐기물 매립지의 침하는 전형적인 토질역학적 거동과는 상이하며, 폐기물 침하는 ...
폐기물 매립지 침하에 대한 공학적 특성 분석은 매립지 설계시나 사용종료된 매립지의 활용에 중요하다. 폐기물 매립지의 침하는 전형적인 토질역학적 거동과는 상이하며, 폐기물 침하는 역학적 공학 특성뿐만 아니라 생화학적 폐기물의 재 압축 거동이 발생한다.
다단계 폐기물 매립지 침하특성을 Sower(1973)의 식을 응용하여 침하량을 산정 하였으며, 폐기물의 일차 및 이차 압축지수는 폐기물의 역학적인 특성과 생화학적 특성을 반영하며, 실측 침하량 데이터를 역산하는 방법으로 일차 압축 지수(Cc)는 폐기물 분해 초기에는 분포 범위가 넓었으나. 매립단이 증가할수록 일차 압축 지수(Cc)는 0.5에 수렴하는 경향을 보였다. 이후 이차 압축 지수(Ca)는 초기 분해 단계에서는 매우 낮은 분포를 보였으나, 매립 후 2∼6년 후 이차 압축 지수는 크게 증가하였고, 산정된 침하특성계수 값을 이용한 계산 침하량과 실측 침하량을 비교 검증하였다.
일차 압축 지수(Cc)와 이차 압축 지수(Ca)를 이용하여 역산한 계산 침하량은 실측 침하량과 잘 부합되며, 산정 된 평균 침하특성계수로 매립지의 전체 침하량을 예측하였으며, 다른 블록에도 잘 부합되는 경향을 보여준다.
다국어 초록 (Multilingual Abstract)
The analysis of the engineering characteristics of waste landfills including the settlement is important to design landfills and to use the closed landfills as construction areas. The settlement of waste landfill depends not only on its mechanical pro...
The analysis of the engineering characteristics of waste landfills including the settlement is important to design landfills and to use the closed landfills as construction areas. The settlement of waste landfill depends not only on its mechanical properties but also on the biological decomposition of wastes, which is distinguished from the behavior of typical soils.
The characteristics of the settlement for multi-staged waste landfill are studied after the of Sower's(1973). The primary and secondary compression index of the waste, which reflects the mechanical and biochemical characteristics of waste, respectively, are calculated form the back analysis of the settlement data. The model verification is performed by comparing the predicted settlement with the measured settlement.
Primary compression index(C_(c)) at the initial stage of waste disposal had wide range. It was converged to 0.5 as the height of waste increases and the value was close to the average of primary compression indexes of total stages of waste. since secondary compression index(C_(a)) of the initial stage of disposal was very low and incresed significantly after 2∼6 years of waste disposal.
Model settlements predicted using back-calculated primary and secondary compression index was well compared with field settlement data. Using the average values of the settlement properities, the model also predicted the settlement of the other block in the studied area very well.
목차 (Table of Contents)