RISS 학술연구정보서비스

검색

인기 검색어

    다국어 입력

    http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

    변환된 중국어를 복사하여 사용하시면 됩니다.

    예시)
    • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
    • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
    닫기

    종이 함수율에 따른 1,2-indanedione/zinc와 1,8-diazafluoren-9-one의 지문 현출력 비교에 관한 연구 = A study on the comparison between 1,2-indanedione/zinc and 1,8-diazafluoren-9-one on a latent fingerprint depending on the moisture content of paper

    한글로보기

    https://www.riss.kr/link?id=T16466166

    • 0

      상세조회
    • 0

      다운로드
    서지정보 열기
    • 내보내기
    • 내책장담기
    • 공유하기
      • URL 복사
    • 오류접수
    인용문이 복사되었습니다.

    부가정보

    국문 초록 (Abstract) kakao i 다국어 번역

    본 연구에서는 습도가 지문 현출에 영향을 미친다는 선행 연구들을 바탕으로, 지문이 부착되어 있는 종이의 함수율에 따라 1,2-indanedione/zinc (1,2-IND/Zn)와 1,8-diazafluoren-9-one (DFO)의 지문 현출력을 비교하는 실험을 진행하였다.
    백색 복사 용지(A4 용지)에 자연지문을 유류하고 상대 습도를 90%~95%로 맞춘 밀폐 용기 속에 보관한 후 종이의 함수율을 측정하였다. 이후 1,2-IND/Zn와 DFO를 각각 검체에 적용하고 180℃에서 10초간 heat press로 열처리를 하여 지문을 현출하였다. 그 결과, 종이의 함수율이 4%일 때는 0%와 비교하여 현출된 지문의 형광 세기 및 밝기 등 현출력에 큰 차이가 없었으나 습도에 노출된 시간이 길어져 함수율이 7% 이상으로 높아질수록 1,2-IND/Zn와 DFO로 현출한 지문의 현출력이 증가하였으며, 특히 형광의 밝기가 눈에 띄게 밝아지고 세기 또한 강해졌다. 함수율이 16%일 때 두 시약을 비교해보면 DFO 사용 시 융선의 번짐이 관찰되었으나 1,2-IND/Zn 사용 시 융선의 번짐이 관찰되지 않았다. 또한, 약하게 찍힌 지문은 DFO를 적용했을 때보다 1,2-IND/Zn를 적용하여 현출했을 때 더 선명하게 현출되었다. UC scale을 이용하여 두 시약을 평가하였을 때도 DFO에 비하여 1,2-IND/Zn가 더 높은 점수를 나타내었다. 추가로, 지문 유류물의 성분이 존재하지 않더라도 습기에 노출된 백색 복사 용지는 1,2-IND/Zn를 처리했을 때 배경에 형광이 나타나는 현상이 관찰되었다.
    이상의 실험 결과들을 바탕으로, 백색 복사 용지 표면에 유류된 잠재지문이 습기에 노출되었을 때, 1,2-IND/Zn를 사용하여 지문을 현출할 것을 권장하며 건조한 환경에 지문이 보관되었을 경우 현출력 개선을 위해 90%~95% 상대 습도에서 약 10분간 보관하여 종이의 함수율이 약 10% 이상이 되었을 때 시약을 적용할 것을 권장한다.
    번역하기

    본 연구에서는 습도가 지문 현출에 영향을 미친다는 선행 연구들을 바탕으로, 지문이 부착되어 있는 종이의 함수율에 따라 1,2-indanedione/zinc (1,2-IND/Zn)와 1,8-diazafluoren-9-one (DFO)의 지문 현출력...

    본 연구에서는 습도가 지문 현출에 영향을 미친다는 선행 연구들을 바탕으로, 지문이 부착되어 있는 종이의 함수율에 따라 1,2-indanedione/zinc (1,2-IND/Zn)와 1,8-diazafluoren-9-one (DFO)의 지문 현출력을 비교하는 실험을 진행하였다.
    백색 복사 용지(A4 용지)에 자연지문을 유류하고 상대 습도를 90%~95%로 맞춘 밀폐 용기 속에 보관한 후 종이의 함수율을 측정하였다. 이후 1,2-IND/Zn와 DFO를 각각 검체에 적용하고 180℃에서 10초간 heat press로 열처리를 하여 지문을 현출하였다. 그 결과, 종이의 함수율이 4%일 때는 0%와 비교하여 현출된 지문의 형광 세기 및 밝기 등 현출력에 큰 차이가 없었으나 습도에 노출된 시간이 길어져 함수율이 7% 이상으로 높아질수록 1,2-IND/Zn와 DFO로 현출한 지문의 현출력이 증가하였으며, 특히 형광의 밝기가 눈에 띄게 밝아지고 세기 또한 강해졌다. 함수율이 16%일 때 두 시약을 비교해보면 DFO 사용 시 융선의 번짐이 관찰되었으나 1,2-IND/Zn 사용 시 융선의 번짐이 관찰되지 않았다. 또한, 약하게 찍힌 지문은 DFO를 적용했을 때보다 1,2-IND/Zn를 적용하여 현출했을 때 더 선명하게 현출되었다. UC scale을 이용하여 두 시약을 평가하였을 때도 DFO에 비하여 1,2-IND/Zn가 더 높은 점수를 나타내었다. 추가로, 지문 유류물의 성분이 존재하지 않더라도 습기에 노출된 백색 복사 용지는 1,2-IND/Zn를 처리했을 때 배경에 형광이 나타나는 현상이 관찰되었다.
    이상의 실험 결과들을 바탕으로, 백색 복사 용지 표면에 유류된 잠재지문이 습기에 노출되었을 때, 1,2-IND/Zn를 사용하여 지문을 현출할 것을 권장하며 건조한 환경에 지문이 보관되었을 경우 현출력 개선을 위해 90%~95% 상대 습도에서 약 10분간 보관하여 종이의 함수율이 약 10% 이상이 되었을 때 시약을 적용할 것을 권장한다.

    더보기

    다국어 초록 (Multilingual Abstract) kakao i 다국어 번역

    In this study, based on previous studies that humidity affects development of fingerprints, an experiment was conducted to compare 1,2-indanedione/zinc (1,2-IND/Zn) and 1,8-diazafluoren-9-one (DFO) on latent fingerprint depending on the moisture content of the paper to which the fingerprint is attached. Natural fingerprints on white copy paper (A4 paper) were stored in a sealed container with a relative humidity of 90% to 95%, the moisture content of the paper was measured with a equipment, and 1,2-IND/Zn and DFO were applied to the samples, and heat treated at 180°C for 10 seconds. As a result, there was no significant differences, such as fluorescence intensity and brightness of the developed fingerprint compared to 0% when the moisture content was 4%. But the effectiveness of the two reagents increased as the moisture content increased to more than 7% due to longer exposure to humidity, the brightness of the fluorescence has become noticeably brighter and stronger. Comparing the two reagents when the moisture content was 16%, smudging of the ridge was observed when using DFO, but no smudging of the ridge was observed when using 1,2-IND/Zn. In addition, the weakly lefted fingerprint was more clearly developed with 1,2-IND/Zn. When the two reagents were evaluated using UC scale, 1,2-IND/Zn showed a higher score than DFO. In addition, even if the component of the fingerprint is not present, a phenomenon in which fluorescence appears in the background when 1,2-IND/Zn is treated was observed on white copy paper exposed to moisture. Based on the above experimental results, it is recommended to develop fingerprints using 1,2-IND/Zn when the latent fingerprints on the surface of the white paper are exposed to moisture, and if fingerprints are stored in a dry environment, store them at 90% to 95% relative humidity for about 10 minutes before applying reagents.
    번역하기

    In this study, based on previous studies that humidity affects development of fingerprints, an experiment was conducted to compare 1,2-indanedione/zinc (1,2-IND/Zn) and 1,8-diazafluoren-9-one (DFO) on latent fingerprint depending on the moisture conte...

    In this study, based on previous studies that humidity affects development of fingerprints, an experiment was conducted to compare 1,2-indanedione/zinc (1,2-IND/Zn) and 1,8-diazafluoren-9-one (DFO) on latent fingerprint depending on the moisture content of the paper to which the fingerprint is attached. Natural fingerprints on white copy paper (A4 paper) were stored in a sealed container with a relative humidity of 90% to 95%, the moisture content of the paper was measured with a equipment, and 1,2-IND/Zn and DFO were applied to the samples, and heat treated at 180°C for 10 seconds. As a result, there was no significant differences, such as fluorescence intensity and brightness of the developed fingerprint compared to 0% when the moisture content was 4%. But the effectiveness of the two reagents increased as the moisture content increased to more than 7% due to longer exposure to humidity, the brightness of the fluorescence has become noticeably brighter and stronger. Comparing the two reagents when the moisture content was 16%, smudging of the ridge was observed when using DFO, but no smudging of the ridge was observed when using 1,2-IND/Zn. In addition, the weakly lefted fingerprint was more clearly developed with 1,2-IND/Zn. When the two reagents were evaluated using UC scale, 1,2-IND/Zn showed a higher score than DFO. In addition, even if the component of the fingerprint is not present, a phenomenon in which fluorescence appears in the background when 1,2-IND/Zn is treated was observed on white copy paper exposed to moisture. Based on the above experimental results, it is recommended to develop fingerprints using 1,2-IND/Zn when the latent fingerprints on the surface of the white paper are exposed to moisture, and if fingerprints are stored in a dry environment, store them at 90% to 95% relative humidity for about 10 minutes before applying reagents.

    더보기

    목차 (Table of Contents)

    • 제1장 서론 1
    • 제1절. 연구의 배경 및 필요성 1
    • 제2절. 선행 연구 3
    • 제3절. 연구의 범위 및 목적 6
    • 제2장 배경 이론 7
    • 제1장 서론 1
    • 제1절. 연구의 배경 및 필요성 1
    • 제2절. 선행 연구 3
    • 제3절. 연구의 범위 및 목적 6
    • 제2장 배경 이론 7
    • 제1절. 종이의 함수율 7
    • 1.1 함수율(Moisture content) 7
    • 1.2 상대 습도와 종이 함수율 간의 관계 및 영향 10
    • 제2절. 아미노산 감응 시약 12
    • 2.1 1,8-Diazafluoren-9-one (DFO) 12
    • 2.1.1 DFO와 습도의 관계에 대한 선행 연구 15
    • 2.2 1,2-Indanedione (1,2-IND) 17
    • 2.2.1 1,2-IND와 습도에 관한 선행 연구 21
    • 제3장 재료 및 방법 24
    • 제1절. 실험 재료 24
    • 1.1 검체 24
    • 1.2 지문 모델 선정 24
    • 1.3 시약 24
    • 1.4 기기 24
    • 제2절. 방법 26
    • 2.1 지문 26
    • 2.2 시약 제조 26
    • 2.3 습도 조절 27
    • 2.4 지문 현출 28
    • 2.5 사진 촬영 28
    • 2.6 지문 평가 28
    • 제4장 결과 및 고찰 30
    • 제1절. 함수율 측정 장비 검증(실험 1) 30
    • 제2절. 종이 함수율에 따른 시약의 현출력 비교(실험 2) 32
    • 제3절. 종이의 배경 형광 확인(실험 3) 44
    • 제5장 결론 47
    • 참고문헌 49
    • 영문요약 56
    더보기

    분석정보

    View

    상세정보조회

    0

    Usage

    원문다운로드

    0

    대출신청

    0

    복사신청

    0

    EDDS신청

    0

    동일 주제 내 활용도 TOP

    더보기

    주제

    연도별 연구동향

    연도별 활용동향

    연관논문

    연구자 네트워크맵

    공동연구자 (7)

    유사연구자 (20) 활용도상위20명

    이 자료와 함께 이용한 RISS 자료

    나만을 위한 추천자료

    해외이동버튼