http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Alper Erdem Yilmaz,Baybars Ali Fil,Murat Tolga Yilmaz,Serkan Bayar,Zuhal Koksal The Korean Electrochemical Society 2024 Journal of electrochemical science and technology Vol.15 No.1
This work aims to investigate the efficiency of electrocoagulation (EC) of pistachio processing industrial wastewater (PPIW) using the continuous EC process. The tubular reactor made of stainless steel with an internal diameter of 60 mm was used as a cathode electrode. The effect of some parameters was examined on the removal of chemical oxygen demand (COD) and total phenols (TP) removal efficiency. The influences of the initial pH of wastewater (from 4 to 8), flow rate (from 25 to 125 mL/min), current density (from 7 to 21 mA/cm<sup>2</sup>), and supporting electrolyte type (NaCl, NaNO<sub>3</sub>, and Na<sub>2</sub>SO<sub>4</sub>), supporting electrolyte concentration (from 10 to 100 mg/L NaCl) on removal efficiency were investigated to determine the best experimental conditions. The examination of the physico-chemical parameters during the EC treatment showed that the best removal efficiency was obtained under conditions where the flow rate was 25 mL/min (20 min reaction time), the pH value was 5.2, and the current density was 21 mA/cm<sup>2</sup> has set. Under these experimental conditions, COD and TP removal efficiency were found to be 75% and 97%, respectively, while energy consumption was 18.5 kW h/m<sup>3</sup>. The study results show that the EC can be applied to PPIW pre-treatment.