http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
W-Disjoint Orthogonality Based Residual Acoustic Echo Cancellation for Hands-Free Communication
LEE, Yoonjae,KIM, Kihyeon,YOON, Jongsung,KO, Hanseok The Institute of Electronics, Information and Comm 2009 IEICE transactions on fundamentals of electronics, Vol.92 No.8
<P>A simple and novel residual acoustic echo cancellation method that employs binary masking is proposed to enhance the speech quality of hands-free communication in an automobile environment. In general, the W-disjoint orthogonality assumption is used for blind source separation using multi-microphones. However, in this Letter, it is utilized to mask the residual echo component in the time-frequency domain using a single microphone. The experimental results confirm the effectiveness of the proposed method in terms of the echo return loss enhancement and speech enhancement.</P>
LEE, Yoonjae,JEONG, Seokyeong,KO, Hanseok The Institute of Electronics, Information and Comm 2008 IEICE transactions on information and systems Vol.91 No.10
<P>A residual acoustic echo cancellation method that employs the masking property is proposed to enhance the speech quality of hands-free communication devices in an automobile environment. The conventional masking property is employed for speech enhancement using the masking threshold of the desired clean speech signal. In this Letter, either the near-end speech or residual noise is selected as the desired signal according to the double-talk detector. Then, the residual echo signal is masked by the desired signal (masker). Experiments confirm the effectiveness of the proposed method by deriving the echo return loss enhancement and by examining speech waveforms and spectrograms.</P>
Lee, Yoonjae The Korea Contents Association 2018 International Journal of Contents Vol.14 No.2
Although there have been studies regarding the influence of customer reviews on consumer decision making at online shopping sites, research on factors affecting the perceived customer review quality for online shopping sites is limited. This study posits that sociability, which is one of the environmental factors of an online shopping site, can affect the quality of customer reviews. Sociability is a key factor in building a collaborative environment online, but studies have been limited to applying sociability to customer reviews that are the result of a collaborative environment. This study expects that sociability affects the performance of online shopping sites through the perceived information quality of customer reviews, and customers' efficacy. More specifically this study investigates the structural relationship between sociability, self-efficacy, collective efficacy, and the perceived information quality of the reviews in an online shopping context, regarding the patronage intention of customers. This study was conducted using a survey of 361 college students. The structural equation model results indicate that user perception of sociability increases self-efficacy and collective efficacy. The improved efficacy enhances the perceived information quality of reviews for online shopping sites, which increases patronage intention of customers. This study found that online shopping sites require a platform for customers to engage in social interaction to enhance their customers' loyalty and lifetime value.
A Comparison Study on Reinforcement Behaviors of Functional Fillers in Nitrile Rubber Composites
( Yoonjae Seong ),( Harim Lee ),( Seonhong Kim ),( Chang Hyun Yun ),( Changsin Park ),( Changwoon Nah ),( Gi-bbeum Lee ) 한국고무학회 2020 엘라스토머 및 콤포지트 Vol.55 No.4
To investigate the reinforcing effects of functional fillers in nitrile rubber (NBR) materials, high-structure carbon black (HS45), coated calcium carbonate (C-CaCO<sub>3</sub>), silica (200MP), and multi-walled carbon nanotubes (MWCNTs) were used as functional filler, and carbon black (SRF) as a common filler were used for oil-resistant rubber. The curing and mechanical properties of HS45-, 200MP-, and MWCNT-filled NBR compounds were improved compared to those of the SRF-filled NBR compound. The reinforcing effect also increased with a decrease in the particle size of the fillers. The CCaCO<sub>3</sub>- filled NBR compound exhibited no reinforcing effect with increasing filler concentration because of their large primary particle size (2 μm). The reinforcing behavior based on 100% modulus of the functional filler based NBR compounds was compared by using several predictive equation models. The reinforcing behavior of the C-CaCO3-filled NBR compound was in accordance with the Smallwood-Einstein equation whereas the 200MP- and MWCNT-filled NBR compounds fitted well with the modified Guth-Gold (m-Guth-Gold) equation. The SRF- and HS45-filled NBR compounds exhibited reinforcing behavior in accordance with the Guth-Gold and m-Guth-Gold equations, respectively, at a low filler content. However, the values of reinforcement parameter (100M<sub>f</sub>/100M<sub>u</sub>) of the SRF- and HS45-filled NBR compounds were higher than those determined by the predictive equation model at a high filler content. Because the chains of SRF composed of spherical filler particles are similarly changed to rod-like filler particles embedded in a rubber matrix and the reinforcement parameter rapidly increased with a high content of HS45, the higher-structured filler. The reinforcing effectiveness of the functional fillers was numerically evaluated on the basis of the effectiveness index (φ<sub>SRF</sub>/φf) determined by the ratio of the volume fraction of the functional filler (φf) to that of the SRF filler (φSRF) at three unit of reinforcing parameter (100M<sub>f</sub>/ 100M<sub>u</sub>). On the basis of their effectiveness index, MWCNT-, 200MP-, and HS45-filled compounds showed higher reinforcing effectiveness of 420%, 70%, and 20% than that of SRF-filled compound, respectively whereas C-CaCO<sub>3</sub>-filled compound exhibited lower reinforcing effectiveness of -50% than that of SRF-filled compound.
Lee, Myung Hyun,Lee, Yoonjae,Oh, Jung Hwan,Kim, Young Gyu,Cho, Sung Ki,Kim, Jae Jeong The Electrochemical Society 2017 Journal of the Electrochemical Society Vol.164 No.14
<P>In this study, we synthesized a leveler that contained two quaternary ammonium groups attached to hexaethylene glycol. The leveler enabled void- and seam-less Cu filling of the microvia. The convection-dependent adsorption of the leveler was assessed through electrochemical analyses such as linear sweep voltammetry and chronoamperometry on a rotating disk electrode, and the effect of convection on the adsorption of the leveler is interpreted in terms of adsorption diffusion model. In a Koutecky-Levich plot, the enhanced adsorption and inhibition of the leveler at the higher convection was clearly observed with the synthesized leveler. (c) 2017 The Electrochemical Society.</P>
웹서비스의 기술적 상호작용성이 사용자 콘텐츠 생산 효율성과 품질 인식에 미치는 영향 연구
이윤재(Yoonjae Lee) 한국콘텐츠학회 2012 한국콘텐츠학회논문지 Vol.12 No.9
다양한 웹서비스 참여자들은 콘텐츠의 생산과 공유, 확산 과정에 참여하고 있다. 웹서비스 내 다양한 상호작용을 지원하는 시스템의 반응 역량을 기술적 상호작용성이라 하며, 이는 웹서비스 성공의 핵심요인으로 연구되고 있다. 본 연구는 기술적 상호작용성 구성요인인 사용자 통제성과 동시성, 반응성이 웹서비스내의 콘텐츠 생산 효율성과 콘텐츠 품질 인식에 미치는 영향을 구조방정식 모형을 통해 탐색적으로 확인하였다. 연구결과 사용자 통제성과 동시성은 웹서비스 내 콘텐츠의 생산 효율성 인식에 긍정적인 영향을 주었으며, 대화적 피드백 역량인 반응성은 웹서비스 내에서 공유되는 콘텐츠의 품질 인식에 긍정적 영향을 주고 있음을 확인하였다. 또한 콘텐츠 생산 효율성 인식이 콘텐츠 품질 인식에 긍정적 영향을 주고 있음을 확인해, 사용자 통제성과 동시성의 품질인식에 대한 간접효과도 확인하였다. 본 연구는 웹서비스 개발 및 운영시 통제 가능한 요인인 기술적 상호작용성이 웹서비스를 통한 콘텐츠 생산 효율성 및 품질 인식에 긍정적인 영향을 주고 있음을 제시함으로써, 고객참여 콘텐츠가 중요한 웹서비스 개발자와 마케터에게 관련성과를 향상시킬 수 있는 웹 기술 활용 및 시스템 구축에 대한 함의를 제공해 주고 있다. One of the key factors for success in fostering web-service is the supply of user-generated contents(UGCs). Technological interactivity is an environmental factor which stimulates user-content interaction, and reflects the system’s capability for supporting various interactions that are allowed by a medium. The present study uses a structural equation model to investigate the influence of three components of technological interactivity-user control, synchronicity, and responsiveness-on web-services’ perceived content performance. The results show that web-services’ user control and synchronicity exhibited a positive relationship with the perceived efficiency of content generation; further, perceived efficiency boosts perceptions of content quality, which means that the user control and synchronicity of a web-service also have an indirect effect on perceived content quality. Additionally, responsiveness has a positive effect on perceived content quality. These findings are important for marketers and operators seeking to make their web-service successful.