http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Kohail, Ahmed M. (검색결과 3 건)
- 무료
- 기관 내 무료
- 유료
-
An Efficient No-Core Cut Pocketing CAM System for Wire-EDM
EL-Midany, Tawfik T.,Kohail, Ahmed M.,Tawfik, Hamdy Society for Computational Design and Engineering 2006 International Journal of CAD/CAM Vol.6 No.1
Recently, wire-EDM became a necessity for many engineering applications, particularly in the dies making. No-Core cut process is helpful for operations in which falling slug can jam the machine or wire. In this paper a proposed CAM system (called NCPP) is introduced, to overcome the limitations of the existing CAM systems in the machining of No-Core cut. The proposed CAM system (NCPP) provides pocketing of No-core cut and optimal selection of the position of starting hole (wire threading point), to minimize toolpath length. It was written for data exchange between CAD-CAM-CNC machines. This data model will become part of the ISO (Data model for Computerized Numerical Controllers) international standard. The NCPP system has been implemented in Visual C++. Many examples are used to illustrate NCPP system. The results show that, NCPP saves the machining time by significant value. This value depends on the shape and complexity of the workpiece that is being cut.
-
Ismail Amer,Mohamed Kohail,M. S. El-Feky,Ahmed Rashad,Mohamed A. Khalaf 한국콘크리트학회 2023 International Journal of Concrete Structures and M Vol.17 No.5
Alkali-activated concrete (AAC) has attained great popularity since finding it as an alternative to Portland cement concrete due to its superior characteristics in terms of mechanical properties and durability, and its low negative environmental impact. This research investigated both experimentally and analytically the bond behavior between alkali-activated slag concrete (AASC) and steel rebars considering some important parameters (rebar diameter and development length-to-diameter ratio) before and after exposure to elevated temperature using beam-end bond testing technique. The obtained experimental results were compared with those obtained from applying the CEB-FIP model and the well-known available equations in the literature. A modified model was proposed for predicting the bond behavior of AASC. Results have showed that the CEB-FIP model provides more conservative values for bond strength compared to the experimentally obtained results which increases the safety level when estimating the bond strength for design purposes. The proposed modified model achieved a higher correlation with the experimental results than the CEB-FIP model at ambient temperature.
-
The Effect of Superplasticizers on Eco-friendly Low-Energy One-Part Alkali-Activated Slag
M. Refaie,Alaa Mohsen,El-Sayed A. R. Nasr,Mohamed Kohail 한국콘크리트학회 2023 International Journal of Concrete Structures and M Vol.17 No.6
One-part alkali-activated materials (OP-AAM) have become a promising binder with low carbon and energy requirements associated with superior mechanical and durability characteristics. This study aims to employ commercial superplasticizers (naphthalene-based “Nb-SP” and polycarboxylate-based “PCb-SP”), as well as laboratory-prepared one (phenol–formaldehyde sulfanilate “PFS-SP”) in enhancing the properties of OP-AAM. The main problem of superplasticizers (SPs) in the AAM is their hydrolysis in the alkaline activator (NaOH) used in the activation reactions. Therefore, the thermo-chemical treatment process was utilized to mitigate the high activator alkalinity by impeding the NaOH in the aluminosilicate precursor matrix. The OP-AAM was fabricated from thermo-chemical treatment powder (TCT-P) resulting from sintering blast furnace slag (GGBFS) with 10 wt% NaOH at 300 and 500 °C. The XRD-pattern showed that NaOH was impeded in the GGBFS via sodium aluminum silicate phase formation after sintering at 500 °C. The results showed that the admixed OP-AAM prepared from TCT-P at 500 °C greatly enhanced the workability and mechanical properties. The PFS-SP proved its efficiency in improving the properties of OP-AAM prepared TCT-P at 300 and 500 °C, referring to its high stability in an alkaline medium. While PCb-SP reinforced the properties of OP-AAM prepared from TCT-P at 500 °C only, proving that PCb-SP promotes high capability in TCT-P-500 as well as in Portland cement.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
