About RISS
RISS 처음 방문 이세요?
고객센터
RISS 활용도 분석
최신/인기 학술자료
해외자료신청(E-DDS)
RISS API 센터
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연구논문 : 수분산 폴리우레탄 아크릴 접착제의 합성 및 물성 연구
이승환 ( Seung Hwan Lee ),천정미 ( Jung Mi Cheon ),정부영 ( Boo Young Jeong ),김한도 ( Han Do Kim ),천제환 ( Jae Hwan Chun ) 한국접착및계면학회 2015 접착 및 계면 Vol.16 No.4
본 연구에서는 수분산 폴리우레탄 아크릴레이트의 접착력 및 물성을 향상시키기 위하여 polyester polyol, 4,4-dicyclohexylmethane diisocyanate (H12MDI), dimethylol propionic acid (DMPA), acrylate monomer를 사용하여 수분산 폴리우레탄 아크릴레이트를 합성하였다. 또한 합성된 수분산 폴리우레탄 아크릴레이트의 물성은 FT-IR, 입도분석, UTM, 접착력 등을 평가하였다. 입도 분석에서 아크릴산의 함량이 증가함에 따라 입자의 크기가 증가하였고, 기계적 물성을 평가한 결과, 아크릴산의 함량이 증가함에 따라 인장강도는 증가하였고 신율은 감소하였다. 접착강도는 PU/acryl 비율 중 acryl의 함량이 증가, 아크릴산의 함량이 증가할수록 증가하였다. 아크릴산의 함량이 0.5 wt%일 때가장 높은 접착강도를 나타내었다. In this study, waterborne polyurethane acrylate were synthesized with polyester polyol, 4,4-dicyclohexylmethane diisocyanate (H12MDI), dimethylol propionic acid (DMPA), acrylate monomer to improve the properties and peel strength. In addition, the properties of the synthesized waterborne polyurethane acylate was evaluated through FT-IR, particle size analysis, UTM, peel strength. As the acrylic acid content increased, particle size increased. In the results of mechanical properties, when the acrylic acid contents increased, tensile strength was increased but elongation was decreased. All peel strength was improved as the acrylic acid contents of WPUA and acrylate ratio of PU/acrylate increased. Optimum peel strength obtained when acrylic acid was 0.5 wt%.
연구논문 : 플라즈마 처리에 의한 신발용 고무부품의 접착특성 연구
정부영 ( Boo Young Jeong ),천정미 ( Jung Mi Cheon ),이상진 ( Sang Jin Lee ),문진복 ( Jin Bok Moon ),천제환 ( Jae Hwan Chun ) 한국 접착 및 계면학회 2013 접착 및 계면 Vol.14 No.3
본 연구에서는 신발에 사용되는 고무부품의 접착에 있어서 버핑 및 용매 세척 등의 표면처리 공정을 대체하기 위하여, 플라즈마 처리를 통한 표면 및 접착특성을 알아보았다. 플라즈마 처리 시분사노즐과 고무 시편과의 거리가 감소할수록 접촉각은 감소하였으며, 플라즈마 처리속도가 증가함에 따라 접촉각은 증가하였다. 고무 시편의 표면조도 측정결과 플라즈마 처리 후 Ra 값은 20%, Rz 값은 16%가 증가하는 결과를 나타내었다. 플라즈마 발생 노즐과 고무시편과의 거리가 증가함에 따라 접착력은 감소하고, 플라즈마 처리속도가 증가함에 따라 접착력은 감소하였다. In this study, we studied surface and adhesion properties with plasma treatment for substitution of buffing and solvent-cleaning in footwear adhesion process. The distance between nozzle and rubber parts was decreased with decreasing the contact angle. And when a speed of plasma treatment increased, the contact angle increased. The result of surface roughness, Ra and Rz increased in 20% and 16% after the plasma treatment. The distance of between nozzle and rubber parts was decreased with decreasing the peel strength. And the speed of plasma treatment was increased with decreasing the peel strength.
Allyl 3-(trimethoxy silyl)propyl ether를 이용한 수성 폴리우레탄 아크릴레이트 실란의 합성 및 물성 연구
박큰별(Kuenbyeol Park),천정미(Jung Mi Cheon),정부영(Boo Young Jeong),정일두(Ildoo Chung),최민지(Min Ji Choi),임경은(Gyeong Eun Lim),천제환(Jae Hwan Chun) 한국고분자학회 2018 폴리머 Vol.42 No.3
수성접착제의 접착특성을 향상시키기 위하여 allyl 3-(trimethoxy silyl)propyl ether(ATSE)를 합성하고 이를 waterborne polyurethane acrylate에 적용하여 접착제를 제조하였다. FTIR과 ¹H NMR을 사용하여 ATSE의 합성을 확인하였다. 또한 FTIR을 통해 수성 폴리우레탄 아크릴레이트 실란(WPAS)의 합성을 확인하였고 DSC와 TGA를 사용하여 WPAS의 열적특성을 확인하였다. DSC와 TGA 분석을 통하여 ATSE의 함량이 증가할수록 soft segment의 열용량이 감소하고, 열안정성이 향상되는 것을 확인하였다. 또한 ATSE 함량에 따른 접착특성을 평가한 결과, ATSE 의 함량이 2.91 wt%일 때에 상태접착력 및 내수성이 가장 우수하였다. In order to improve adhesion properties and water resistance of waterborne polyurethane adhesives, allyl 3-(trimethoxy silyl)propyl ether (ATSE) was prepared. Waterborne polyurethane acrylate silanes (WPAS) was synthesized using ATSE. Their chemical structures were confirmed by FTIR and ¹H NMR, and their thermal properties were characterized by DSC and TGA. Analyses of DSC and TGA confirmed that heat capacity of soft segment decreased and thermal stability improved with increasing ATSE. Also, adhesion properties and water resistance were evaluated by UTM. In the adhesion properties and water resistance test, the maximum values were obtained by WPAS containing 2.91 wt% ATSE.