http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저압 UV램프 구동시스템 및 출력안정화 시스템에 관한 연구
이진우,노재엽,Yi, Chin-Woo,No, Jae-Yup 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.8
본 연구의 목표는 안정된 출력과 높은 효율을 갖는 저압 UV램프의 구동시스템을 설계하는 것이다. UV램프 시스템은 반도체공정, 살균 등 그 적용범위가 대단히 넓은 전력설비의 하나이며 고부가가치의 제품을 생산하기 위해서는 출력의 안정화 기술은 필수적이다. 본 연구에서 저압 UV램프의 구동시스템 설계 목표는 변환효율 90[%], 출력안정도 ${\pm}7.5[%]$, 램프출력은 300[W] 이상으로, 연구목표에 상응하는 결과를 얻을 수 있었으며 국내시장 선점에 유리할 것이고, 제품의 생산비를 낮추는 시도를 계속한다면, 수출도 가능할 것으로 예상된다. 또한 부가적인 보호회로가 개발되면, 자외선램프용 전자식 안정기의 신뢰성을 크게 재고시킬 것이다. The target of this research is a design of constant and high efficiency driving system for a low pressure UV lamp. An UV lamp system is one of wide range electrical equipments for semiconductor manufacturing and sterilization, etc... It is essential the technique of constant output for high added value device. A design target of driving system for low pressure UV lamp of conversion efficiency is 90[%], UV lamp of output stability within ${\pm}7.5[%]$, and lamp power is over 200[W]. The results meet the target of this study well, and have a benefit of domestic market occupation and enable to export. And if protection circuits were developed, it increases the stability of a electronic ballast for UV lamps.
저압 수은-아르곤 혼합기체 방전의 주파수에 따른 전압, 전류 변화의 이론적 해석
이진우,Yi, Chin-Woo 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.2
저압 수은-아르곤 혼합기체 방전을 이용하는 형광램프는 일정전력을 소비하는 경우, 전원주파수 1(kHz)부근에서 전류는 최대 값을 램프전압은 최소 값을 갖는 현상을 나타낸다. 본 논문에서는 원자레벨의 방전 모델 식을 만들어 입자밀도와 전자온도의 변화를 수치해석을 이용하여 계산하고, 이를 이용하여 전원주파수에 따라 형광램프의 전류와 램프전압이 변화하는 현상을 이론적으로 설명하였다. A fluorescent lamp which uses low pressure mercury-argon gas discharge shows the maximum current and minimum lamp voltage near 1(kHz) source frequency at constant power. For explain these phenomena theoretically, in this paper a atomic level discharge model was made and particle density and electron temperature variation were calculated using numerical method.
이진우(Chin-Woo Yi) 한국조명·전기설비학회 2002 한국조명·전기설비학회 학술대회논문집 Vol.2002 No.-
The fluorescent lamp has been successfully modeled by employing the radial variation of particle density and considering driving circuit effects on the characteristics of discharge process. The electron energy distribution is assumed to have a Maxwellian. The electron mobility and the ambipolar diffusion coefficients are considered to vary with an electron energy rather than a simple uniform value. Energy states of mercury atom in the discharge process are regarded as six levels rather than simple 4 or 5 levels. These discharge processes have been accurately solved by numerically employing mixed the FDM and the 2nd Runge-Kutta method. This model was applied to analyzing real circuit. Simulation and experimental results were presented to verify the feasibility of the modeling.
광원의 색온도 및 연색성에 따른 밝음의 느낌에 관한 연구
이진우(Chin-Woo Yi),지철근(Chol-Kon Chee),조경애(Kyung-Ae Cho) 한국조명·전기설비학회 2002 한국조명·전기설비학회 학술대회논문집 Vol.2002 No.-
본 연구에서는 광원의 색온도와 연색성의 차이에 의한 밝음의 느낌과 조도와의 관계를 밝히기 위하여 이종 램프간, 또한 동종 램프 간의 비교 실험을 시각 대상물로 흑백 인쇄문자지와 색상지를 사용하여 수행하였다. 현재 널리 사용되고 있는 백열전구, 형광램프, 고압 나트륨램프, 메탈핼라이드램프, 무전극 방전램프를 대상으로 실험을 수행하여, 램프 간 실험 결과의 통계처리 결과, 백열전구와 무전극 방전램프, 주광색 형광램프와 무전극 방전램프, 고압 나트륨램프와 무전극 방전램프, 메탈핼라이드램프와 무전극 방전램프는 유의수준 5[%] 이내에서 결과에 분명한 차이가 있음이 밝혀졌다.
이진우(Chin-Woo Yi),최현배(Hyun-Bae Choi),박재권(Jae-Kweon Park) 한국조명·전기설비학회 2004 한국조명·전기설비학회 학술대회논문집 Vol.2004 No.11월
비교적 최근에 개발된 T5 형광 램프를 점등시키기 위한 전자식 안정기를 개발하였다. 램프는 110W의 정격을 갖고, 그 길이는 2300mm이다. 제작한 안정기는 우수한 기동특성을 보였으며 안정된 전기적, 광학적 특성을 얻을 수 있었다.
131W 저압 나트륨 램프용 고효율 전자식 안정기 개발
이진우(Chin-Woo Yi),최현배(Hyun-Bae Choi),박재권(Jae-Kweon Park),박기도(Ki-Do Park) 한국조명·전기설비학회 2003 한국조명·전기설비학회 학술대회논문집 Vol.2003 No.-
본 논문에서는 91[W] 저압 나트륨 램프용 고효율 전자식 안정기를 제작하여 전기적 특성을 측정하였다. 개발된 고효율 전자식 안정기는 입력 전압 220[V], 입력 전류 641[mA], 입력 전력 137[W], 역률은 99[%], 전류 고조파 함유율 13[%]로 측정되었다.
이진우(Chin-Woo Yi),최현배(Hyun-Bae Choi),박재권(Jae-Kweon Park),박기도(Ki-Do Park) 한국조명·전기설비학회 2003 한국조명·전기설비학회 학술대회논문집 Vol.2003 No.-
본 논문에서는 36[W] FPL 형광등용 전자식 안정기의 페라이트 코아를 사용하는 인덕터 대신 공심을 사용하는 안정기를 제작하였다. 전자식 안정기는 고주파 동작을 하기 때문에 그에 따르는 자성재료는 히스테리시스손의 발생이 더욱 커지는 현상을 이해하여 Air Coil의 특성을 적용한 전자식 안정기를 설계해 보았다.
이진우(Chin-Woo Yi),남택주(Taek-Joo Nam) 한국조명·전기설비학회 2003 한국조명·전기설비학회 학술대회논문집 Vol.2003 No.-
The voltage and current of fluorescent lamp has been successfully calculated in the case of frequency variation. Energy states of mercury atom in the discharge process are regarded as six levels. These calculations have been accurately solved by numerically employing mixed the FDM and the 2nd Runge-Kutta method. The theoretical calculation results and experimental results were presented to verify the feasibility of the modeling. Calculation and experimental results were presented to verify the feasibility of the calculation.
이진우(Chin-Woo Yi) 한국조명·전기설비학회 2005 한국조명·전기설비학회 학술대회논문집 Vol.2005 No.5월
형광램프는 일정전력을 소비하는 경우, 전원주파수 1[kHz] 부근에서 전류는 최대값을, 램프전압은 최소값을 갖는 현상을 나타낸다. 본 논문에서는 원자레벨의 방전 모델식을 만들어 입자밀도와 전자온도의 변화를 수치해석을 이용하여 계산하고, 이를 이용하여 전원주파수에 따라 형광램프의 전류와 램프전압이 변화하는 현상을 이론적으로 설명하였다.
수중에서 Sagnac 광섬유간섭계를 이용한 초음파신호의 검출과 분석에 관한 고찰
이진우(Chin - Woo Yi),이준호(June - Ho Lee) 호서대학교 공업기술연구소 2002 공업기술연구 논문집 Vol.21 No.1
The optical fiber sensor is a subject which has been attracted considerable attention in recent year. Especially, it is being developed for the detection and location of partial discharge in oil-filled transform ers. In th is paper, we propose and experim entally dem onstrate directivity and sensitivity of a hollow cylindrical m andrel sensor. The sound source is a P ZT actuator of hollow cylinder type. Several layers of the fiber lam inated around the m andrel surface and experim ents were perform ed on three axis modes. The experim ental results can be applied to analyze detected signals optim ally.