http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
리튬이온 전지용 가스켓 고무의 특성에 미치는 충전제의 영향
서관호(Kwan Ho Seo),조광수(Kwang Soo Cho),윤인섭(In Sub Yun),최우혁(Woo Hyuk Choi),허병기(Byung Ki Hur),강동국(Dong Gug Kang) 한국고분자학회 2010 폴리머 Vol.34 No.5
리튬이온 전지에 사용되는 가스켓 재료는 내전해액성, 전기절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 가스켓 고무에 적용되는 충전제의 특성을 살펴보기 위하여 EPDM(ethylene propylene diene monomer), NBR(nitrile butadiene), FKM(fluoro elastomers)에 카본블랙 및 실라카계 충전제의 함량을 조정하여 compound를 만들었다. 이렇게 배합된 compound를 리튬이온 전지의 작동 환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 카본블랙 및 실리카계 충전제를 사용하여 각 충전제에 따른 고무재료의 물리적 화학적 특성에 대하여 검토하였다. The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM. NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.
리튬 이온 전지 씰링에의 응용을 위한 EPDM, NBR, FKM, VMQ 및 FVMQ 특성연구
서관호 ( Kwan Ho Seo ),조광수 ( Kwang Soo Cho ),윤인섭 ( In Sub Yun ),최우혁 ( Woo Hyuk Choi ),허병기 ( Byung Ki Hur ),강동국 ( Dong Gug Kang ) 한국고무학회 2010 엘라스토머 및 콤포지트 Vol.45 No.3
리튬 이온 전지의 가스켓 재료로 사용되기 위해서는 내전해액성, 전기절연성, 낮은 압축 영구 줄음률, 비오염성, 내열성이 요구된다. Perfluoroalkoxy (PFA)보다 압축 영구 줄음률이 우수한 고무의 적합성을 평가하기 위하여 Ethylene Propylene Diene Monomer (EPDM), Nitrile Butadiene(NBR), Fluoro Elastomers(FKM), Methyl-Vinyl Silicone Rubber (VMQ), Fluorosilicone(FVMQ)을 이용하여 최적상태의 compound를 제작하고 특성을 살펴보았다. 시험편을 80 ℃의 propylene carbonate액에 침적하여 경도 및 체적변화를 1,000시간까지 시간별로 측정하였다. EPDM과 VMQ가 내전해액성이 우수하였으며, 전기절연성에서도 체적저항 기준 10(10)Ωcm이상의 결과를 얻을 수 있었다. 따라서, EPDM과 VMQ가 적절한 것으로 판단되었다. The materials of the lithium ion battery gasket require chemical resistance to the electrolyte, electrical insulating, compression set, anti-contamination and heat resistance. To estimate suitability for rubber which has better performance to compression set than PFA, each compound were made with various rubbers, such as EPDM, NBR, FKM, FVMQ, VMQ and we checked the characteristics of each compound. Samples from each compound was deposited in Propylene Carbonate and tested for changing of Hardness and Volume during 1,000 hr with 80 ℃. EPDM and VMQ showed good performance to chemical resistance to the electrolyte, and also we could get the values over 10(10)Ωcm on volume resistance basis in electrical insulating. EPDM and VMQ were judged as the most suitable material.