http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고체산화물 연료전지용 LCO계 연결재에 소결 조제 첨가에 따른 특성
설광희(Seol, Kwanghee),지미정(Ji, Mijung),안용태(Ahn, Yongtea),권용진(Kwon, Yongjin),최병현(Choi, Byunghyun) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.11
고체산화물 연료전지의 연결재의 필요한 물성으로는 공기극과 연료극을 차폐시켜줄 수 있는 고밀도와 구성 소재간의 전기적으로 연결될 수 있는 전기전도도 및 낮은 이온전도도. 산화극과 환원극에서 화학적 안정성과 타 구성 소재와의 열팽창 계수가 일치 등이 중요한 특성으로 필요하게 된다. 이를 위해 LaCrO3계 연결재가 주로 사용되어 왔다. 그러나 LCO계 연결제는 1400?C 이상의 높은 소결 온도와 이로 인한 Cr의 휘발로 인한 타 구성소재와의 반응 등으로 인해 저온소결의 필요성이 재기되고 있는 소재 이다. 본 연구에서는 LCO계 구성 소제에 소결 조제를 첨가하여 저온에서 결정성 및 소결거동, 전기적 특성을 평가하였다.
권용진(Kwom, Yongjin),최병현(Choi, Byunghyun),지미정(Jee, Mijung),안용태(Ahn, Yongtae),설광희(Seol, Kwanghee),남산(Nham, Shan) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.11
In this study, we fabricated tubular ceramic support for segmented-in-series solid oxide fuel cell (SOFC) by using MAO(MgAl-stabilized ) as main material and activated carbon as pore former. Thermal expansion properties of ceramic support with different amounts of activated carbon were analyzed by using dilatometer to decide a suitable sintering temperature. The tubular ceramic supports with different amounts of activated carbon (15, 20, 30wt.%) were fabricated by the extrusion technique. After sintering at 1400?C for 2h, cross section and surface morphology of tubular ceramic support were analyzed by using SEM image. Also, the porosity, mechanical property, gas permeability of tubular ceramic supports was measured. Based on these results, we established the suitable fabrication technique of tubular ceramic support for segmented-in-series SOFC.