http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종남,Kim, Jong Nam 한국정보통신학회 2016 한국정보통신학회논문지 Vol.20 No.8
본 논문에서는 비디오 부호화에서 중요한 요소인 움직임 예측을 위한 고속 알고리즘을 제안한다. 기존의 고속 움직임 예측 방법들이 연구되어 왔지만 여전히 연산량 감축에 대한 문제점을 가지고 있다. 본 논문에서는 전영역 탐색기반의 방법에 비하여 예측화질은 같게 유지하면서 불필요한 계산량을 현저히 줄이는 알고리즘을 제안한다. 제안하는 방법은 움직임 벡터를 찾기 위해 후보 벡터의 블록에러합을 계산해 갈 때 각 후보지점에서 한 번에 블록에러합을 전부 계산하는 것이 아니라 탐색 영역에 있는 모든 화소에 대해 몇 단계로 나누어 부분 블록에러합을 계산하고 이를 통하여 전체의 최소에러를 갖는 지점을 일찍 유추하여 불필요한 계산량을 줄임으로써 계산속도의 향상을 얻는다. 제안한 알고리즘은 전영역 탐색 알고리즘과 같은 예측화질을 갖는 기존의 고속 알고리즘과 비교하여 더 적은 계산량을 사용한다. In this paper, we propose a fast motion estimation algorithm which is important in performance of video encoding. Even though so many fast algorithms for motion estimation have been published due to its tremendous computational amount of for full search algorithm, efforts for reducing computations in motion estimation still remain. In the paper, we propose an algorithm that reduces unnecessary computations only, while keeping prediction quality the same as that of the full search. The proposed algorithm does not calculate block matching error for each candidate at once to find motion vectors but divides the calculation procedure into several steps and calculates partial sum of block errors. By doing that, we can estimate the minimum error point early and get the enhancement of calculation speed by reducing unnecessary computations. The proposed algorithm uses smaller computations than conventional fast search algorithms with the same prediction quality as full search.
우선순위와 문턱치를 가지고 최적 후보 조기 검출을 사용하는 고속 움직임 예측 알고리즘
김종남,Kim, Jong-Nam 한국융합신호처리학회 2020 융합신호처리학회 논문지 (JISPS) Vol.21 No.2
본 논문에서는 우선순위와 문턱치를 가지고 최적 후보의 조기 탐지를 이용한 움직임 추정의 고속 블록 매칭 알고리즘을 제안한다. 전 영역 탐색(full search) 알고리즘의 계산량을 줄이기 위해 많은 고속 움직임 추정 알고리즘이 발표되었지만, 여전히 움직임 추정 성능을 향상시키기 위한 많은 연구가 보고되고 있다. 제안된 알고리즘은 이전 부분 매칭 오류에서 우선순위가 높은 각 후보에 대한 블록 매칭 오류를 계산한다. 제안된 알고리즘은 대부분의 기존 고속 블록 매칭 알고리즘에 추가적으로 적용하여 속도를 높일 수 있다. 그렇게 함으로써 최소 오류 지점을 조기에 찾고 불가능한 후보에 대한 불필요한 계산을 줄임으로써 속도를 높일 수 있다. 제안된 알고리즘은 전 영역 탐색 알고리즘과 동일한 예측 화질을 가지면서 기존의 고속 무손실 탐색 알고리즘보다 적은 계산을 사용한다. 실험결과로서, 제안된 알고리즘은 예측 화질 저하 없이 PDE 및 전 영역 탐색 방법의 계산에 비해 30 ~ 70%까지 줄일 수 있으며, 다른 고속 손실 알고리즘을 사용하면 더욱 감소시키는 것으로 나타났다. In this paper, we propose a fast block matching algorithm of motion estimation using early detection of optimal candidate with high priority and a threshold. Even though so many fast algorithms for motion estimation have been published to reduce computational reduction full search algorithm, still so many works to improve performance of motion estimation are being reported. The proposed algorithm calculates block matching error for each candidate with high priority from previous partial matching error. The proposed algorithm can be applied additionally to most of conventional fast block matching algorithms for more speed up. By doing that, we can find the minimum error point early and get speed up by reducing unnecessary computations of impossible candidates. The proposed algorithm uses smaller computation than conventional fast full search algorithms with the same prediction quality as the full search algorithm. Experimental results shows that the proposed algorithm reduces 30~70% compared with the computation of the PDE and full search algorithms without any degradation of prediction quality and further reduces it with other fast lossy algorithms.
TiN 코팅된 지대주 나사의 반복 착탈 후 표면 변화와 적합도에 관한 연구
김종남,정재헌,김희중,Kim, Jong-Nam,Chung, Chae-Heon,Kim, Hee-Jung 대한치과보철학회 2007 대한치과보철학회지 Vol.45 No.1
Statement of problem: A few dry lubricants were applied to abutment screws for the improvement of joint stability. Purpose: The purpose of this study was to evaluate the surface change and fit of TiN-Coated abutment screw through the examination of tested screws in the field emission scanning electron microscope(FE-SEM;Netherland, Phillips co., model:XL 30 SFEG) after repeated closing and opening. Materials and method: Titanium(3i/implant Innovations Inc, USA) and Gold-Tite abutment screws(3i/implant Innovations Inc, USA) were selected for Group A and C respectively. TiN coated titanium abutment screws were also divided into two groups, Group B and D. Abutment screws of each group and the fit of abutment screw/implant fixture/abutment were observed on FE-SEM after repeated closing and opening test respectively. Results: 1. The abutment screws of TiN coated groups(Group B and D) showed more remarkable wear resistance in the threads of the screw than those of the other group(Group A and C). 2. There were more severe wear and defect of TiN coating in Group D tightened to 32 Ncm than Group B to 20 Ncm. 3. There was no difference in the fit of abutment screw/fixture/abutment among four groups, Group A, Group B, Group C and Group D. Conclusion: Under the conditions of this study, it is suggested that TiN coating of abutment screw be clinically acceptable and be expected to reduce the risk of abutment screw loosening. TiN coating of abutment screw showed good resistance against wear and the adequate fit of abutment screw/implant fixture/abutment.