RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        현장시험 및 수치해석을 통한 확공지압형 앵커의 거동특성

        김계웅(Gyuiwoong Kim),안광국(Kwangkuk Ahn),민경남(Kyongnam Min),정찬묵(Chanmuk Jung) 한국지반환경공학회 2013 한국지반환경공학회논문집 Vol.14 No.8

        지압형 앵커는 일본, 유럽 등에서 1950년대부터 안정성 및 경제성의 우수함이 인식되어 왔다. 하지만 국내에서 적용하고 있는 지압형 앵커는 쐐기체의 확장에 의한 지반의 마찰력만으로 설계 인장력을 발휘하는 구조적인 문제점을 지니고 있으며 공벽에 밀착시키는 방법이 마땅치 않아 지압력을 확인하기가 어려운 실정이다. 본 연구에서는 지압력을 최대한 발휘할 수 있도록 확공지압형 앵커시스템을 개발하였다. 또한, 확공지압형 앵커의 인발특성을 평가하고 지압력에 의한 정착장 감소효과를 검증하기 위하여 현장시험을 수행하였다. 확공지압형 앵커에 대한 현장시험은 그라우팅 이전 가인장 상태와 그라우팅 후 본인장 상태에 대한 인발시험을 각각 수행하여 인발저항력을 확인하였으며 이를 마찰형 앵커의 인발시험 결과와 비교 · 분석하였고, 범용 유한요소해석 프로그램인 PLAXIS-2D를 이용한 정착부 상세 모델링을 통하여 가인장 시 정착부에서의 지압효과에 대한 검증을 수행하였다. The superiority of bearing ground anchor system has been recognized for the stability and economical efficiency since 1950s in Japan, Europe and etc. The ground anchor introduced in Korea, however, has the structural problem that the tensile strength comes only from the ground frictional force caused by the expansion of the wedge body and it is impossible to evaluate the bearing resistance because the adhering method of the anchor body to hollow wall is not appropriate. In this study, the underreamed ground anchor system was developed so that the bearing pressure of ground anchor can exert as much as possible. And the in-situ tests were performed to evaluate the pullout behavior characteristics and to verify the decreasing effect of the bonded length. The pullout tests were performed with the non-grouted tension condition and grouted tension condition in order to identify the pull-out resistance of each conditions. In addition, it was compared with the results of friction anchor. Finally, the numerical analysis was fulfilled to verify the bearing effect at the bonded part through the detailed modeling by PLAXIS-2D, which is general finite element method analysis program.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼