http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유한요소법을 이용한 임플란트 경부 디자인이 골응력에 미치는 영향 분석
김경탁,조광헌,이청희,유원재,이규복,Kim, Kyung-Tak,Jo, Kwang-Heon,Lee, Cheong-Hee,Yu, Won-Jae,Lee, Kyu-Bok 대한치과보철학회 2009 대한치과보철학회지 Vol.47 No.4
연구목적: 임플란트 경부 디자인의 차이가 경부 치밀골의 응력분포에 미치는 영향을 유한요소법을 이용하여 분석하고자 한다. 연구재료 및 방법: 몸체 형상은 유사 (직경 4.3 mm, 길이 10 mm)하나 경부 디자인이 internal형, external형, 및 submerged형으로 다른 3종의 임플란트 시스템 ((주)덴티스, 대구, 대한민국)에 대하여 축대칭 유한요소모델을 사용하여 해석하였다. 악골 폭경은 7 mm로 동일하게 모델링하였고 하중 조건으로는 임플란트 장축에 평행한 수직하중 50 N, 임플란트 장축에 $45^{\circ}$방향으로 작용하는 경사력 50N을 설정하였다. 결과: 해석한 3종의 임플란트 모두 경부 피질골에 응력집중을 발생시켰으며 디자인 차이에 따른 응력 수준의 차이가 관찰되었다. 경부 피질골의 최대 응력은 수직력 조건에서 internal형, submerged형, external형의 순으로 컸으며, 그 값은 각각 2.71, 2.60, 2.48 MPa였다. 경사력 조건에서는 internal형, external형, submerged형의 순으로 컸으며 그 값은 각각 9.30, 9.14, 8.97 MPa였다. 결론: 임플란트 경부 디자인이 주위 치밀골의 응력 분포에 영향을 미칠 수 있지만 그 차이는 크지 않은 것으로 분석되었다. Statement of problem: High stress concentration on the crestal cortical bone has been regraded as a major etiologic factor jeopardizing long term stability of endosseous implants. Purpose: To investigate if the design characteristics of crestal module, i.e. internal type, external type, and submerged type, affect stress distribution on the crestal cortical bone. Material and methods: A cylindrical shaped implant, 4.3 mm in diameter and 10 mm in length, with 3 different crestal modules, i.e. internal type, external type, and submerged type, were analysed. An axisymmetric scheme was used for finite elment formulation. A vertical load of 50 N and an oblique load of 50N acting at $45^{\circ}$ with the implant's long axis was applied. The peak crestal bone stress acting at the intersection of implant and crestal bone was compared. Results: Under vertical load, the crestal bone stress was high in the order of internal, external, and submerged types. Under the oblique loading condition, it was in the order of internal, submerged, and external types. Conclusion: Crestal module design was found to affect the level of the crestal bone stresses although the actual amount was not significant.
미계측 유역의 유출모의를 위한 지리정보시스템의 응용(I) : 토양도 및 토지이용도의 선정
김경탁,심명필,선우중호,Kim, Gyeong-Tak,Sim, Myeong-Pil 한국수자원학회 1999 한국수자원학회논문집 Vol.32 No.2
Hydrology-based topographical informations generated by GIS techniques could be changed according to the selection of base map, algorithm of extraction, and so on. The purpose of this paper is to investigate the variation of SCS CN extracted by GIS technique and to propose the effective strategy for applying GIS to the rainfall-runoff simulation in ungaged basin. For experimental implementation, GIS spatial data, such as reconnaissance soil map, detailed interpretative soil map, landuse planning map and remotely sensed data(Landsat TM), were collected and generated to calculate the amount of effective rainfall in Pyungchang river basin. In applying SCS Runoff Curve Number to the test basin, the hydrological attribute data were analyzed. In addition, the characteristics of runoff responses according to the selection of GIS spatial data for SCS CN were reviewed. This study shows the applicability of GIS techniques to runoff simulation in ungaged basin by comparing with the measured flood hydrograph. It has been found that the detained interpretative soil map and remote sensing data are appropriate for calculating of SCS CN. GIS기법을 이용하여 추출되는 수문지형정보는 기존 주제도의 선정, 사용된 알고리즘 등에 따라 달라질 수 있다. 따라서 본 연구에서는 토양도 및 토지이용도의 선정에 따른 유출수문곡선번호의 변화를 분석하여 미계측 유역의 강우유출모의에 효과적인 GIS의 활용방안을 제시하고자 한다. 이를 위해 미계측 유역에서의 유효강우량 산정에 필요한 GIS 공간자료(개략토양도, 정밀토양도, 토지이용계획도,위성영상)를 구축하였다. 미국 토양보존국(SCS)의 유출곡선번호(runoff curve number; CN)방법의 적용을 위한 수문학적 속성의 입력과정에서 발생할 수 있는 문제점을 분석하였다. 또한 SCS CN값 산정을 위한 GIS 공간자료의 선정에 따른 유출응답특성을 검토하였다. 실측 수문곡선과의 검증을 통해 미계측 유역에서의 강우유출모의에서 GIS의 적용성을 확인할 수 있었다. SCS CN값을 산정하기 위한 GIS 공간자료로서는 정밀토양도와 위성영상자료를 이용하는 것이 적합한 것으로 나타났다.