http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
非線型計劃法에 의한 最適設計에 대하여 : T形보를 中心으로
徐克秀 울산과학대학 1982 연구논문집 Vol.7 No.1
T形보 斷面의 許容應力度 設計의 경우에 있어서 最適設計의 문제를 定式化하고 이것을 직접 採素法으로 풀고 最適斷面을 決定하기 위한 係數를 제시한다. In allowable stress design of T Beam sections, this paper intends to formulate optimum design by Non-linear Programing, to solve this by direct researching method, and to present Coefficient in order to determine optimum sections of T Beam.
건축 하부구조 설계 및 시공의 문제점과 개선방향에 대한 연구
서극수 울산과학대학 1999 연구논문집 Vol.26 No.1
건축물의 생산은 건축설계로 시작하여 표준적인 시공과정을 거쳐 축조되게 되며 그 중에서 특히 건축물의 공학적인 안전을 유지하기 위해 구조설계를 하게 되는데 기초하부의 설계는 무엇보다 기본이 되면서, 아주 중요하며 하자가 발생할 시에는 그 보강이나 보수가 아주 어렵다. 본 연구는 기초구조 설계 및 시공상의 문제점을 현장조사, 설문조사를 통해 파악하고 그 해결방법과 연구방법을 제시함으로써 건축물의 생산성 효과와 안전율을 높여 경제적인 구조물이 되도록 기여하고자 한다. Beginning from the architectural design through the standard construction process, a building is constructed. Among this process, particularly in order to grantee safety of building, the structural design is conducted. And one of the structural design, the Substructural Design is the basis of entire construction process, and very essential. In addition, when a defect in substructure occur, its reinforcement or repair is very difficult. Therefore, clarifying the question of substructural design and construction, and revealing the solution and research method for that question, this research is to contribute the improvement of building construction and safety to the economic structure.
學校建築의 積載荷重에 대한 確率論的 特性에 관한 硏究(Ⅰ)
徐克秀 울산과학대학 1993 연구논문집 Vol.18 No.-
건물의 구조 설계에서 가장 중요한 설계요소는 하중이다. 그중에서도 적재하중이 가장 중요한 부분을 차지한다. 우리나라에서 사용하고 있는 설계하중 중에서 적재하중은 건물용도별로 규정하고 정해져 있으나 현실적으로는 불합리한 점이 많다. 본 연구는 학교건축물의 적재하중에 대한 보다 합리적인 설계를 위해서 새로운 규준을 제공하기 위한 기초적인 연구의 한 과정이며 적재하중을 확률론적 특성에 의해 분석한 것이다. In Structure Design, live load is important problem. Among, in specially it contain most important part. Design load using in our country. It is indicated to architectural code and it has much unreasonable problems at present. This study has been basic progress for assuming new propose to Design in school structure's living load and it's stochastic characteristics.
徐克秀 울산과학대학 1992 연구논문집 Vol.17 No.-
全世界的으로 콘크리트의 高强度化에 대한 硏究가 建物의 超高層化에 의해 급속도로 이루어지고 있다. 學界 및 産業硏究所에서도 큰 관심을 갖고 基礎的인 硏究가 進行되고 있다. 國內에서도 미래에 대비해 世界的인 水準에 걸맞게 硏究에 박차를 가해야 할 것이다. 그러므로 高强度 concrete의 展望과 發展可能性에 대한 硏究가 이루어져야 할 것으로 사료된다. It is universal phenomenon that the research in hyigh-strength concrete and the demand on ultra high-rising of it are increasing rapidly. The industrial world as well as the academic society takes a growing interest in these matters, and the basic study on them is now in progress. In korea, to prepare for the future, it is required for the study on them to reach the high-world level. Therefore, the study on the present status and the possibility of future growth of high-strength concrete should be conducted.
光彈性 實驗에 의한 캔티레버 뿌리쪽 應力 擴散部의 解析
朴東九,徐克秀,申壯浩 울산과학대학 1984 연구논문집 Vol.9 No.1
캔티레버에 荷重을 載荷시킬 때 固定端까지의 應力 解析은 일반 구조 理論으로 解析이 가능하다. 그러나 固定端에서 보가 묻혀있는 뿌리쪽의 應力 解析은 일반 구조 理論으로 해석하기가 곤란하다. 本 論文에서는 이 部分의 應力 解析을 光彈性 實驗을 통하여 解析했다. It is possible to investigate the stress distributions on the fixed end of cantilever by the general elastic theory when the beam is loaded but difficult to do the development of stresses on the side of root of cantilever by it. So, the stress distributions of it is examined by the phothoelastic method.
전문대학 건축 교육 과정에 관한 연구 : 특별과정(심화과정)을 중심으로 Focused on the intensive (honour) course
신장호,서극수 울산과학대학 1996 연구논문집 Vol.23 No.1
전문대학은 80년대 고도산업사회의 인력수요에 대비할 목적으로 설립되었으며 전문적인 기술과 이론을 연마하여 국가 발전에 필요한 중견 직업인을 양성함을 목적으로 하고 있다. 그러나 현행교육과정과 그운영은 실재의 교육 목표에 부합되지 않고있다. 이에 2+1과 2+2에 대한 교육과정을 제시한다. Junior colleges were established to satisfy the demand of increasing manpower in the high developed industrial society of 1980s. It aims chiefly at training semi-professional workers needed for the national development by teaching special knowledge and skill. The current curriculums and its application, however, have not been in accordance with its aims. This paper wants to present curriculums for the 2+1 and 2+2.