http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
남상운,김영식,성인모,고기혁,Nam, Sang-Woon,Kim, Young-Shik,Sung, In-Mo,Ko, Gi-Hyuk 한국농공학회 2012 한국농공학회논문집 Vol.54 No.5
In order to derive the efficient utilization of low pressure compressed air fogging system, cooling efficiencies with control types were analyzed through cooling experiments in tomato greenhouses. The control types were set up with temperature control, humidity control, temperature and humidity control, and time control. It showed that the cooling effects were 0.7 to $3.3^{\circ}C$ on average and maximum of 4.3 to $7.0^{\circ}C$, the humidification effects were 3.5 to 13.5 % on average and maximum of 14.3 to 24.4 %. Both the cooling and humidification effect were the highest in the time control method. The cooling efficiency of the air fogging system was not high with 8.3 to 27.3 % on average. However, the cooling efficiency of 24.6 to 27.3 % which appears from the time control is similar to the cooling efficiency of high pressure fogging system experimented in Japan. The air fogging system is operated by low pressure, but its efficiency is similar to high pressure. We think because it uses compressed air. From this point of view, we suggest that the air fogging system can get the cooling efficiency of similar levels to that of high pressure fogging system and it will have an advantage from clogging problem of nozzle etc.
남상운 ( S. W. Nam ),신현호 ( H. H. Shin ) 한국농공학회 2015 한국농공학회 학술대회초록집 Vol.2015 No.-
온실의 난방부하는 일반적으로 관류열부하, 틈새환기전열부하, 지중전열부하 등으로 구성되어 있다. 틈새환기전열부하는 온실의 피복재와 보온커튼의 틈새를 통한 누기 열손실로 보온피복의 종류, 시공 상태, 유지관리 상태 등에 따라 다르다. 온실의 난방부하 중 틈새환기전열부하 산정방법은 설계 기준마다 제각각이고, 온실의 규모에 따라 각각의 방법에는 큰 차이가 있으므로 보다 정확히 국내에 적용할 수 있는 방법을 정립할 필요가 있다. 본 연구에서는 원예시설의 환경설계 중 난방부하 산정방법 정립에 필요한 기초자료를 제공할 목적으로 다양한 종류의 보온커튼을 설치한 단동 및 연동 플라스틱 온실에서 추적가스법을 이용하여 틈새 환기율을 실측하였으며, 온실의 틈새환기전열부하 산정방법을 검토하였다. 연동 플라스틱 온실의 틈새환기율은 0.042~0.245회/h의 범위로 측정되었으며 단동 플라스틱 온실의 틈새환기율은 0.056~0.336회/h의 범위로 측정되어 단동온실이 약간 큰 것으로 나타났다. 온실의 틈새환 기율은 단동, 연동 구분 없이 보온커튼의 층수에 따라 크게 감소하는 것으로 나타났다. 또한 틈새환기율은 온실의 실내외 기온차가 커질수록 증가하는 경향을 보였으나, 실험기간 동안의 낮은 풍속 범위에서 외부 풍속에 따른 틈새환 기율의 변화는 일정한 경향을 찾을 수 없었다. 온실의 난방설계를 위한 틈새환기율은 적정 실내외 기온차에서의 값을 제시할 필요가 있고, 최대난방부하 산정의 기준이 되는 낮은 풍속 범위에서 풍속에 따른 틈새환기율의 변화는 고려하지 않아도 되는 것으로 고찰되었다. 다만 강풍지역에서는 열관류율을 포함하여 최대난방부하를 약간 증가시키는 보정계수의 적용이 필요할 것으로 판단되었다. 온실의 틈새환기전열부하 산정방법을 검토한 결과 틈새환기전열계수와 온실의 피복면적을 이용하는 방법은 문제가 있는 것으로 나타났으며, 틈새환기율과 온실의 체적을 이용하는 방법이 합리적인 것으로 판단되었다.
남상운 ( Nam Sang Woon ),김대식 ( Kim Dae Sik ),김태철 ( Kim Tai Cheol ) 한국농공학회 2007 한국농공학회 학술대회초록집 Vol.2007 No.-
Actual states of energy utilizations were investigated and analyzed on three representative rural villages. Rural residents were almost using the ondol boiler as a heating facility and oil(diesel, kerosene) and electricity(night thermal-storage power service) as a heating energy. There were a few households using briquette or firewood in a fuel hole with Korean hypocaust. Most of their cooking facilities were gas ranges using LPG. The most popular hot-water supply system was an oil boiler and the next was an electricity boiler. The amount of energy use in a rural household generally showed 20,000 to 40,000 won/month of the power rate, 400 to 800 liter/year of the oil and 60 to 120 kg/year of the LPG. Prompt measures should be taken to promote the spread of new and renewable energy such as solar heat, biomass and wind power, etc.
남상운 ( Sang-woon Nam ),신현호 ( Hyun-ho Shin ) 한국농업기계학회 2019 한국농업기계학회 학술발표논문집 Vol.24 No.1
유리온실의 기능성과 플라스틱 온실의 경제성을 갖춘 새로운 형태의 온실을 신개념 온실이라고 한다. 신개념 온실의 피복재는 플라스틱이며 측고를 5m 이상으로 높이고, 2층 이상의 알루미늄 스크린을 보온커튼으로 설치하고, 용마루 천창 방식과 복합 환경 제어시스템을 도입한 연동 온실이다. 신개념 온실의 열수지를 분석하여 에너지 소비량을 예측하고, 1-2W형 온실 및 벤로형 유리온실과 비교하였다. 신개념 온실은 충남 천안에 위치한 폭 8m, 측고 6m의 벤로 아치형 플라스틱 온실을 대상으로 분석하였으며 농가형 소규모(0.3ha) 온실과 기업형 대규모(1.0ha) 온실로 나누어 비교하였다. 신개념 온실의 에너지 소비량은 유리온실과 비슷하거나 약간 감소하는 것으로 나타났으며, 1-2W형 온실보다는 14~22% 감소하는 것으로 나타났다. 신개념 온실의 소요 난방비를 연료의 종류에 따라 비교한 결과 경유가 가장 높았고, 목재펠릿, 천연가스, 전기, 석탄, 지열히트펌프의 순으로 나타났다. 난방비를 절감하기 위해서는 경유난방을 가스나 석탄 난방으로 전환하고, 지열히트펌프 등의 신재생에너지 보급을 확대할 필요가 있는 것으로 판단되었다.