http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양명석(Myung-Seog Yang),정재권(Jae-Kwon Jung),설창원(Shul Chang Won),이기범(Kee-Bhum Lee) 한국항공우주학회 2004 韓國航空宇宙學會誌 Vol.32 No.2
T-50 기체구조의 건전성 평가, 설계수명 평가 등을 위하여 전기체 내구성시험이 국방과학연구소 구조시험실에서 수행되고 있다. 일반적으로 구조시험의 성공 여부는 얼마나 정확하게 시험대상물의 경계조건을 구현하는가에 달려 있다. 특히, 시험대상물이 항공기 전기체일 경우 항공기의 실제 비행상태를 구현하기에 많은 어려움이 있기 때문에 본 논문에서는 고등훈련기 전기체 내구성시험을 위하여 개발된 부유식 시험조립 기법을 소개하고 적용 결과를 검토하였으며, 향후 항공기 전기체 구조시험을 수행하는데 있어서 유용한 시험 조립 기법임을 확인하였다. Full-scale airframe durability test has been performed to evaluate the integrity and the design life of the Advanced Trainer(T-50) Structure at the Structural Test Laboratory in Agency for Defense Development(ADD). Generally, the successful structural test depends on embodying exactly the boundary condition of a test specimen. If the test specimen is a full-scale airframe, it is difficult to embody the real flight condition of a aircraft during the test. In this paper, therefore, the floating test set-up technique for the Advanced Trainer Full-scale airframe durability test is introduced and reviewed. Also, it is confirmed that this method is available in a full-scale airframe structural test in future.
복합재 항공기 전기체 구조시험 시험하중 산출 방법 연구
최익현(Ik-Hyeon Choi),안석민(Seok-Min Ahn) 한국항공우주연구원 2011 항공우주기술 Vol.10 No.2
복합재 항공기의 설계하중 데이터로부터 전기체 구조시험 중에 하중부가용 스트랩에 부가될 시험하중의 크기를 산출하는 몇 가지 방법에 대하여 비교 분석하였다. 이 방법들을 KC-100 복합재 항공기 좌측 주익의 시험하중 산출과정에 적용해보고 산출된 결과의 특성 및 차이를 분석하였다. 항공기 전기체 구조시험에 부가되는 시험하중은 각 항공기의 설계하중의 특성 및 하중부가용 스트랩의 위치 등에 따라 그 크기가 다르게 결정되므로 본 연구에서 소개하는 시험하중 산출방법을 모두 적용하여 결과를 비교해보고 최종적으로 적합한 방법을 선정하는 과정이 필요하다. Some methods of calculation of test load value from design load data were investigated which will be applied at strap installed full-scale airframe of composite aircraft. These methods were applied to left wing of KC-100 composite aircraft and the calculated test load values were compared with each others. Generally since test load values are differently calculated according to each aircraft type and position of straps, all calculation methods mentioned at this study need to be applied and compared to each aircraft. Finally the most appropriate method needs to be selected.