http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Tien-Tung Luong,Binh Tinh Tran,Yen-Teng Ho,Ting-Wei Wei,Yue-Han Wu,Tzu-Chun Yen,Lin-Lung Wei,Jer-Shen Maa,Edward Yi Chang 대한금속·재료학회 2015 ELECTRONIC MATERIALS LETTERS Vol.11 No.3
The effects of surface pre-treatments and the role of an AlN buffer layer for 2H-SiC growth on c-plane sapphire substrates by thermal CVD are investigated. While the crystallinity of SiC directly grown on sapphire substrate always degrades with a hydrogen pre-treatment but improves by optimizing carbonization, the crystallinity of SiC grown on sapphire substrate using an AlN buffer grown by MOCVD improves with sufficient time of exposure to the H pre-treatment but always deteriorates with carbonization. Detailed microstructural analysis by phi-scan x-ray diffraction reveals that SiC film grown on sapphire substrate consists of crystalline domains with two different crystallographic orientations which are rotated relative to each other along the [111] axis by 60°. A highly oriented hexagonal 2H-SiC film is obtained on low-cost c-plane sapphire substrate by using an AlN buffer. 2H-SiC is unambiguously determined not only by phi-scan x-ray diffraction but also by high-resolution transmission electron microscopy. The growth relationship between 2HSiC and 2H-AlN are coherent due to the favorable bonding of C and Al between SiC and AlN.
The Effect of CdS QDs Structure on the InGaP/GaAs/Ge Triple Junction Solar Cell Efficiency
Chen-Chen Chung,Binh Tinh Tran,Hau-Vei Han,Yen-Teng Ho,Hung-Wei Yu,Kung-Liang Lin,Hong-Quan Nguyen,Peichen Yu,Hao-Chung Kuo,Edward Yi Chang 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.2
This work describes optical and electrical characteristics of InGaP/GaAs/Ge triple-junction (T-J) solar cells with CdS quantum dots (QDs) fabricated by a novel chemical solution. With the anti-reflective feature at long wavelength and down-conversion at UV regime, the CdS quantum dot effectively enhance the overall power conversion efficiency more than that of a traditional GaAs-based device. Experimental results indicate that CdS quantum dot can enhance the short-circuit current by 0.33 mA/cm2, which is observed for the triple-junction solar cells with CdS QDs of about 3.5 nm in diameter. Moreover, the solar cell conversion efficiency is improved from 28.3% to 29.0% under one-sun AM 1.5 global illumination I-V measurement.
Effect of the Circle-Grid Electrodes on Concentrated GaAs Solar Cell Efficiency
Chen-Chen Chung,Binh Tinh Tran,Ming-Hung Han,Kung-Liang Lin,Hung-Wei Yu,Yen-Teng Ho,Chun-Yen Chang,Edward Yi Chang 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.5
In this study, we investigate the effect of the shading factor of the front grid pattern on concentrated solar cell efficiency, taking the trade-off between the series resistance of the electrodes and the amount of incident light into consideration. We examine the thermal effect with regard to five different circle-grid electrode patterns of the front contact. The front contacts with different grid patterns affect the characteristics of light-concentratedtype GaAs single-junction solar cells. The device parameters analyzed include the open-circuit voltage (Voc), short-circuit current (Isc), fill factor (FF) and conversion efficiency (η). The results of our study show that for a concentration ratio greater than 60x with AM1.5G, the device with a shading factor of 7.1% has the best cell efficiency of 27.05%, due to the smaller current crowding at the center spot. The results indicate that the conversion efficiency of solar cells can be improved by establishing a compromise between the shading effect and the series resistance effect.