http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Stability Index Based Voltage Collapse Prediction and Contingency Analysis
C. Subramani,Subhransu Sekhar Dash,M. Jagdeeshkumar,M. Arun Bhaskar 대한전기학회 2009 Journal of Electrical Engineering & Technology Vol.4 No.4
Voltage instability is a phenomenon that could occur in power systems due to stressed conditions. The result would be an occurrence of voltage collapse leading to total blackout of the system. Therefore, voltage collapse prediction is an important part of power system planning and operation, and can help ensure that voltage collapse due to voltage instability is avoided. Line outages in power systems may also cause voltage collapse, thereby implying the contingency in the system. Contingency problems caused by line outages have been identified as one of the main causes of voltage instability in power systems. This paper presents a new technique for contingency ranking based on voltage stability conditions in power systems. A new line stability index was formulated and used to identify the critical line outages and sensitive lines in the system. Line outage contingency ranking was performed on several loading conditions in order to identify the effect of an increase in loading to critical line outages. Correlation studies on the results obtained from contingency ranking and voltage stability analysis were also conducted, and it was found that line outages in weak lines would cause voltage instability conditions in a system. Subsequently, using the results from the contingency ranking, weak areas in the system can be identified. The proposed contingency ranking technique was tested on the IEEE reliability test system.
Stability Index Based Voltage Collapse Prediction and Contingency Analysis
Subramani, C.,Dash, Subhransu Sekhar,Jagdeeshkumar, M.,Bhaskar, M. Arun The Korean Institute of Electrical Engineers 2009 Journal of Electrical Engineering & Technology Vol.4 No.4
Voltage instability is a phenomenon that could occur in power systems due to stressed conditions. The result would be an occurrence of voltage collapse leading to total blackout of the system. Therefore, voltage collapse prediction is an important part of power system planning and operation, and can help ensure that voltage collapse due to voltage instability is avoided. Line outages in power systems may also cause voltage collapse, thereby implying the contingency in the system. Contingency problems caused by line outages have been identified as one of the main causes of voltage instability in power systems. This paper presents a new technique for contingency ranking based on voltage stability conditions in power systems. A new line stability index was formulated and used to identify the critical line outages and sensitive lines in the system. Line outage contingency ranking was performed on several loading conditions in order to identify the effect of an increase in loading to critical line outages. Correlation studies on the results obtained from contingency ranking and voltage stability analysis were also conducted, and it was found that line outages in weak lines would cause voltage instability conditions in a system. Subsequently, using the results from the contingency ranking, weak areas in the system can be identified. The proposed contingency ranking technique was tested on the IEEE reliability test system.
Iro Zaharaddeen S.,Subramani C.,Rajendran Jerome,Sundramoorthy Ashok K. 한국탄소학회 2021 Carbon Letters Vol.31 No.6
Recently, activated carbon derived from diferent agricultural by-products or bio-waste is receiving a great deal of attention due to its low or zero cost and environmental friendliness. In this work, fowers obtained from Borassus fabellifer (BFL) is used as a carbon source and potassium hydroxide (KOH) as activation precursor to produce activated carbon with high specifc surface area and predominant micropore. The obtained carbon material was activated at 650 °C. The as-prepared sample had a specifc surface area of 930.3 m2 /g and pore size distribution of 1.96 nm. The carbon material exhibited high electrochemical performance with a specifc capacitance of 247 F/g at 0.5 A/g in 1 M H2SO4 electrolyte and an excellent cycling stability of 94% after 2500 cycles. A specifc energy of 101.1 Wh/kg and a specifc power of 4500 kW/kg were obtained. Based on the electrochemical properties exhibited by BFL, it could be used as an excellent electrode material for supercapacitor applications.
Paduchuri. Chandra Babu,Subhransu Sekhar Dash,C. Subramani,S. Harish Kiran 대한전기학회 2015 Journal of Electrical Engineering & Technology Vol.10 No.1
A custom power device provides an integrated solution to the present problems that are faced by the utilities and power distribution. In this paper, a new controller is designed which is connected to a multiconverter unified power quality conditioner (MC-UPQC) for improving the power quality issues adopted modified synchronous reference frame (MSRF) theory with Fuzzy logic control (FLC) technique. This newly designed controller is connected to a source in order to compensate voltage and current in two feeders. The expanded concept of UPQC is multi converter-UPQC; this system has a two-series voltage source inverter and one shunt voltage source inverter connected back to back. This configuration will helps mitigate any type of voltage / current fluctuations and power factor correction in power distribution network to improve power quality issues. In the proposed system the power can be conveyed from one feeder to another in order to mitigate the voltage sag, swell, interruption and transient response of the system. The control strategies of multi converter-UPQC are designed based on the modified synchronous reference frame theory with fuzzy logic controller. The fast dynamics response of dc link capacitor is achieved with the help of Fuzzy logic controller. Different types of fault conditions are taken and simulated for the analysis and the results are compared with the conventional method. The relevant simulation and compensation performance analysis of the proposed multi converter-UPQC with fuzzy logic controller is performed.