A 6 m cube in an atmospheric boundary layer flow -Part 1. Full-scale and wind-tunnel results

Hoxey, R.P.,Richards, P.J.,Short, J.L. Techno-Press 2002 Wind and Structures, An International Journal (WAS Vol.5 No.2

Results of measurements of surface pressure and of velocity field made on a full-scale 6 m cube in natural wind are reported. Comparisons are made with results from boundary-layer wind-tunnel studies reported in the literature. Two flow angles are reported; flow normal to a face of the cube (the $0^{\circ}$ case) and flow at $45^{\circ}$. In most comparisons, the spread of wind-tunnel results of pressure measurements spans the full-scale measurements. The exception to this is for the $0^{\circ}$ case where the roof and side-wall pressures at full-scale are more negative, and as a result of this the leeward wall pressures are also lower. The cause of this difference is postulated to be a Reynolds Number scale effect that affects flow reattachment. Measurements of velocity in the vicinity of the cube have been used to define the mean reattachment point on the roof centre line for the $0^{\circ}$ case, and the ground level reattachment point behind the cube for both $0^{\circ}$ and $45^{\circ}$ flow. Comparisons are reported with another full-scale experiment and also with wind-tunnel experiments that indicate a possible dependency on turbulence levels in the approach flow.

Full-scale study of wind loads on roof tiles and felt underlay and comparisons with design data

R.P. Hoxey,N.M. Rideout,A.P. Robertson,P. Freathy 한국풍공학회 2007 Wind and Structures, An International Journal (WAS Vol.10 No.6

Wind pressure data have been collected on the tiled roof of a full-scale test house at Silsoe in the UK. The tiled roof was of conventional UK construction with a batten-space and bitumen-felt underlay beneath the interlocking concrete tiles. Pressures were monitored on the outer surface of selected tiles, at several locations within the batten-space, and beneath the underlay. Data were collected both with and without ventilator tiles installed on the roof. Little information appears to exist on the share of wind load between tiles and underlays which creates uncertainty in the design of both components. The present study has found that for the critical design case of maximum uplifts it would be appropriate to assign 85% of the net roof load to the tiles and 15% to the underlay when an internal pressure coefficient of -0.3 is used, and to assign 60% to the tiles and 50% to the underlay when an internal pressure coefficient of +0.2 is assumed (an element of design conservatism is inherent in the apparent 110% net loading indicated by the latter pair of percentage values). These findings indicate that compared with loads implied by BS 6399-2, UK design loads for underlay are currently conservative by 25% whilst tile loads are unconservative by around 20% in ridge and general regions and by around 45% in edge regions on average over roof slopes of 15o-60o.

A 6m cube in an atmospheric boundary layer flow. Part I. Full-scale and wind-tunnel results

R.P. Hoxey,P.J. Richards,J.L. Short 한국풍공학회 2002 Wind and Structures, An International Journal (WAS Vol.5 No.2

Full-scale study of wind loads on roof tiles and felt underlay and comparisons with design data

Robertson, A.P.,Hoxey, R.P.,Rideout, N.M.,Freathy, P. Techno-Press 2007 Wind and Structures, An International Journal (WAS Vol.10 No.6

Wind pressure data have been collected on the tiled roof of a full-scale test house at Silsoe in the UK. The tiled roof was of conventional UK construction with a batten-space and bitumen-felt underlay beneath the interlocking concrete tiles. Pressures were monitored on the outer surface of selected tiles, at several locations within the batten-space, and beneath the underlay. Data were collected both with and without ventilator tiles installed on the roof. Little information appears to exist on the share of wind load between tiles and underlays which creates uncertainty in the design of both components. The present study has found that for the critical design case of maximum uplifts it would be appropriate to assign 85% of the net roof load to the tiles and 15% to the underlay when an internal pressure coefficient of -0.3 is used, and to assign 60% to the tiles and 50% to the underlay when an internal pressure coefficient of +0.2 is assumed (an element of design conservatism is inherent in the apparent 110% net loading indicated by the latter pair of percentage values). These findings indicate that compared with loads implied by BS 6399-2, UK design loads for underlay are currently conservative by 25% whilst tile loads are unconservative by around 20% in ridge and general regions and by around 45% in edge regions on average over roof slopes of $15^{\circ}-60^{\circ}$.

Wind-induced fatigue loading of tubular steel lighting columns

Robertson, A.P.,Hoxey, R.P.,Short, J.L.,Burgess, L.R.,Smith, B.W.,Ko, R.H.Y. Techno-Press 2001 Wind and Structures, An International Journal (WAS Vol.4 No.2

Two 12 m high tubular steel lighting columns have been instrumented to determine the wind-induced fatigue loading experienced by such columns. Each column supported a single luminaire mounted on a 0.5 m long bracket. One column was planted in soil, and the other bolted through a welded baseplate to a substantial concrete base. The columns were strain gauged just above the shoulder weld which connected the main shaft to the larger base tube. Forced vibration tests were undertaken to determine the natural frequencies and damping of the columns. Extensive recordings were made of response to winds with speeds from 4 m/s to 17 m/s. Selected records were analysed to obtain stress cycle counts and fatigue lives. Mean drag coefficients were also derived from the strain data to investigate experimentally the effect of Reynolds Number.

An investigation of the wind statistics and extreme gust events at a rural site

C.J. Baker,P.J. Richards,A.D. Quinn,R.P. Hoxey,M. Sterling 한국풍공학회 2006 Wind and Structures, An International Journal (WAS Vol.9 No.3

This paper presents an analysis of wind velocity measurements obtained from four ultrasonic anemometers arranged in a vertical formation. The anemometers were located in a rural environment with a view to providing detailed information on the flow statistics of the lower part of the atmospheric boundary layer, particularly for the extreme wind events that are important in loading calculations. The data is analysed using both conventional analysis and conditional sampling. The latter is combined with wavelet analysis in order to provide a detailed analysis of the energy/frequency relationship of the extreme events. The work presented in this paper suggests that on average the extreme events occur as a result of the superposition of two independent mechanisms - large scale events that scale on the atmospheric boundary layer thickness and small scale events a few tens of metres in size.

Short term unsteady wind loading on a low-rise building

Sterling, M.,Baker, C.J.,Hoxey, R.P. Techno-Press 2003 Wind and Structures, An International Journal (WAS Vol.6 No.5

This paper presents an extensive analysis of the short term, unsteady wind loading on a low-rise building. The building is located in a rural environment and only the specific situation of wind flow orthogonal to the long face of the structure is considered. The data is analysed using conventional analysis and less traditional methods such as conditional sampling and wavelet analysis. The nature of the flow field over the building is found to be highly unsteady and complex. Fluctuating pressures on the windward wall are shown to a large extent to be caused by the fluctuations in the upstream flow, whereas extreme pressures on the roof are as a result of high intensity small scale flow structures. On the roof of the building a significant amount of energy is shown to exist at frequencies above 1 Hz.

An investigation of the structure of ensemble averaged extreme wind events

Scarabino, A.,Sterling, M.,Richards, P.J.,Baker, C.J.,Hoxey, R.P. Techno-Press 2007 Wind and Structures, An International Journal (WAS Vol.10 No.2

This paper examines the extreme gust profiles obtained by conditionally sampling full-scale velocity data obtained in the lower part of the atmospheric boundary layer. It is demonstrated that three different types of behaviour can be observed in the streamwise component of velocity. In all cases the corresponding vertical velocity component illustrates similar behaviour. An idealised horseshoe vortex model and a downburst model are investigated to examine if such structures can explain the behaviour observed. In addition, an empirical model is developed for an isolated gust corresponding to each of the three types of behaviour observed. It is possible that the division of the gust profile into three different types may lead to an improvement in the correlation of extreme gust events with respect to type.

The effect of small embankments on wind speeds

Quinn, A.D.,Robertson, A.P.,Hoxey, R.P.,Short, J.L.,Burgess, L.R.,Smith, B.W. Techno-Press 1998 Wind and Structures, An International Journal (WAS Vol.1 No.4

Full-scale measurements have been made to determine the increase in wind speed over two exposed embankments, one of $23^{\circ}$ slope and 4.7 m in height, the other of $24^{\circ}$ slope and 7.3 m in height. Measurements were made at heights of 5, 10 and 15 m above the upper edge of each embankment and at the same heights approximately 100 m upwind in the lower-level approach fetch. Despite the modest sizes of the embankments, the maximum recorded increase in mean wind speed was 28% and the minimum was 13%; these increase relate to increases in wind loads on structures erected at the top of the embankments of 64% and 28% respectively. The associated increases in gust speeds are estimated at 33% and 18%, which imply increases in gust loading of 77% and 39% respectively. These experimental results are compared with predictions obtained from a computational fluid dynamics (CFD) analysis, using three high Reynolds number eddy-viscosity models and estimates from the UK wind loading code, BS 6399: Part 2. The CFD results are generally in agreement with the experimental data, although near-ground effects on the embankment crest are poorly reproduced.

An investigation of the wind statistics and extreme gust events at a rural site

Sterling, M.,Baker, C.J.,Richards, P.J.,Hoxey, R.P.,Quinn, A.D. Techno-Press 2006 Wind and Structures, An International Journal (WAS Vol.9 No.3

This paper presents an analysis of wind velocity measurements obtained from four ultrasonic anemometers arranged in a vertical formation. The anemometers were located in a rural environment with a view to providing detailed information on the flow statistics of the lower part of the atmospheric boundary layer, particularly for the extreme wind events that are important in loading calculations. The data is analysed using both conventional analysis and conditional sampling. The latter is combined with wavelet analysis in order to provide a detailed analysis of the energy/frequency relationship of the extreme events. The work presented in this paper suggests that on average the extreme events occur as a result of the superposition of two independent mechanisms - large scale events that scale on the atmospheric boundary layer thickness and small scale events a few tens of metres in size.