http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
철근콘크리트 및 프리스트레스트 콘크리트 원형 벽 전단강도 평가를 위한 반복가력실험
양현근(Yang, Hyeon Keun),박홍근(Park, Hong Gun) 한국콘크리트학회 2021 한국콘크리트학회 학술대회 논문집 Vol.33 No.2
국내 고진동수 성분이 많은 지진이 일어남에 따라 고진동수 지진에 대한 원자력 발전소 구조물의 내진성능평가가 필요하다. 특히 격납건물의 경우 높은 요구 내진 하중으로 인해 두꺼운 벽체로 설계되고 그로인해 내부 균열이 발생되는 것이 관찰되었다. 이번 연구에서는 격납건물 축소모형의 반복하중 실험을 통해 내진성능평가를 수행하였다. As earthquakes with many high-frequency components occur in Korea, it is necessary to evaluate the seismic performance of nuclear power plant structures against high-frequency earthquakes, especially containment buildings. In this study, seismic performance evaluation of nucelar power plant wall was conducted by reduction model using cyclic loading test.
비선형 유한요소 해석에 의한 강봉 트러스 시스템으로 보강된 조적벽체의 내진거동 평가
황승현 ( Seung-hyeon Hwang ),양근혁 ( Keun-hyeok Yang ),김상희 ( Sang-hee Kim ),임진선 ( Jin-sun Lim ),임채림 ( Chae-rim Im ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.4
이 연구에서는 강봉 트러스 시스템으로 보강된 조적벽체의 내진거동을 합리적으로 평가하기 위하여 범용프로그램인 Abaqus를 이용한 비선형 유한요소해석 절차를 제시하였다. 조적벽체의 유한요소 모델은 콘크리트 손상 소성(concrete damaged plasticity, CDP)모델 및 벽돌-모르타르 계면 특성은 Yang et al.이 제시한 조적 프리즘의 압축 및 인장의 응력-변형률 모델과 전단마찰모델을 기반으로 메소-스케일법을 적용하였다. 유한요소 해석결과를 다양한 변수조건에서 실험결과와 비교한 결과, 강봉 트러스 시스템으로 보강된 조적벽체의 균열진전, 파괴모드, 강체회전 내력 및 최대내력 그리고 횡하중-횡변위 관계에 대한 실험결과와 잘 일치하였다. 따라서 제시된 유한요소해석 절차는 조적벽체의 내진보강 설계에 합리적으로 이용될 수 있다고 판단된다. The present study presents a nonlinear finite element analysis (FEA) approach using the general program of Abaqus to evaluate the seismic response of unreinforced masonry walls strengthened with the steel bar truss system developed in the previous investigation. For finite element models of masonry walls, the concrete damaged plasticity (CDP) and meso-scale methods were considered on the basis of the stress-strain relationships under compression and tension and shear friction-slip relationship of masonry prisms proposed by Yang et al. in order to formulate the interface characteristics between brick elements and mortars. The predictions obtained from the FEA approach were compared with test results under different design parameters; as a result, a good agreement could be observed with respect to the crack propagation, failure mode, rocking strength, peak strength, and lateral load-displacement relationship of masonry walls. Thus, it can be stated that the proposed FEA approach shows a good potential for designing the seismic strengthening of masonry walls.