http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탐색 영역 데이터의 재사용 및 조기중단이 가능한 HEVC 움직임 추정 엔진 설계
허아름(Ahrum Hur),박태욱(Taewook Park),이성수(Seongsoo Lee) 한국전기전자학회 2016 전기전자학회논문지 Vol.20 No.3
HEVC 가변 블록 크기 움직임 추정 기법에서는 동일 탐색 영역의 데이터가 블록 크기 별로 중복 사용되어 탐색 영역 데이터의 사용량이 많고 조기중단 기법의 적용이 어렵다는 문제점이 있다. 본 논문에서는 최상위 블록 크기 PU를 탐색의 기준으로 두어, 최상위 블록 크기 PU의 탐색과 동일 지점에서의 하위 블록 크기 PU의 탐색을 동시에 진행하여 메모리 대역폭을 줄였고, 최상위 블록 크기 PU의 연산 결과값을 재사용하여 연산량 또한 줄였다. 조기중단 기법을 적용했을 때 또한 최상위 블록 크기 PU를 기준으로 판별하면 하위 블록 크기 PU의 위치에 따라 탐색 기회가 고르게 반영되지 않아 화질의 저하로 이어질 수 있으므로 이를 방지하기 위해 조기중단 기법의 적용 순서를 최상위 블록 크기 PU 내의 최하위 블록 크기 PU를 기준으로 위아래로 번갈아 수행하도록 변형하였다. 설계된 ME 엔진은 Verilog HDL로 기술하고 0.18㎛ 공정에서 합성 및 검증하였으며, 하드웨어 크기는 36,101 게이트이고 최대 동작 속도는 263.15㎒이다. In HEVC variable block size motion estimation, same search window data are duplicatedly used in each block size. It increases memory bandwidth, and it is difficult to exploit early termination. In this paper, largest block size and its corresponding smaller block sizes with same positions are performed at the same time. It reduces memory bandwidth and computation by reusing search window data and computation results. In the early termination, image quality can be degraded when it determines early termination by observing largest block size only, since smaller block sizes cannot be equally terminated due to their relative positions. So, in this paper, processing order of early termination is changed to perform smaller block sizes in turns. The designed motion estimation engine was described in Verilog HDL and it was synthesized and verified in 0.18㎛ process technology. Its gate count and maximum operating frequency are 36,101 gates and 263.15 ㎒, respectively.
RAD51C-Deficient Cancer Cells Are Highly Sensitive to the PARP Inhibitor Olaparib
Min, Ahrum,Im, Seock-Ah,Yoon, Young-Kwang,Song, Sang-Hyun,Nam, Hyun-Jin,Hur, Hyung-Seok,Kim, Hwang-Phill,Lee, Kyung-Hun,Han, Sae-Won,Oh, Do-Youn,Kim, Tae-You,O'Connor, Mark J.,Kim, Woo-Ho,Bang, Yung-J American Association for Cancer Research 2013 Molecular cancer therapeutics Vol.12 No.6
<P>A PARP inhibitor is a rationally designed targeted therapy for cancers with impaired DNA repair abilities. RAD51C is a paralog of RAD51 that has an important role in the DNA damage response. We found that cell lines sensitive to a novel oral PARP inhibitor, olaparib, had low levels of RAD51C expression using microarray analysis, and we therefore hypothesized that low expression of RAD51C may hamper the DNA repair process, resulting in increased sensitivity to olaparib. Compared with the cells with normal RAD51C expression levels, RAD51C-deficient cancer cells were more sensitive to olaparib, and a higher proportion underwent cell death by inducing G<SUB>2</SUB>–M cell-cycle arrest and apoptosis. The restoration of RAD51C in a sensitive cell line caused attenuation of olaparib sensitivity. In contrast, silencing of RAD51C in a resistant cell line enhanced the sensitivity to olaparib, and the number of RAD51 foci decreased with ablated RAD51C expression. We also found the expression of RAD51C was downregulated in cancer cells due to epigenetic changes and RAD51C expression was low in some gastric cancer tissues. Furthermore, olaparib significantly suppressed RAD51C-deficient tumor growth in a xenograft model. In summary, RAD51C-deficient cancer cells are highly sensitive to olaparib and offer preclinical proof-of-principle that RAD51C deficiency may be considered a biomarker for predicting the antitumor effects of olaparib. <I>Mol Cancer Ther; 12(6); 865–77. ©2013 AACR</I>.</P>
오성호(Oh, SeongHo),허아름(Hur, AhRum),방성훈(Bang, SungHoon),이상호(Lee, SangHo) 대한전자공학회 2023 대한전자공학회 학술대회 Vol.2023 No.6
In many industries including consumer electronics and vehicles, serial communication is widely used to transmit and receive data precisely. Especially asynchronous serial communication has a lot of advantages of less transmission line, high reliability, and long transmission distance, which is implemented by Universal Asynchronous Receiver/Transmitter (UART) protocol. This paper introduces a method of reducing communication errors such as data missing that can occur when using UART protocol.
가변 블록 크기 움직임 추정 기법에서 탐색 영역 데이터의 재사용과 조기 중단 기법의 적용
박태욱,허아름,이성수,Park, Taewook,Hur, Ahrum,Lee, Seongsoo 한국전기전자학회 2016 전기전자학회논문지 Vol.20 No.1
HEVC에서는 가변 블록 크기마다 각각 독립적으로 움직임 추정을 수행하기 때문에 단일 블록 크기일 때보다 몇 배의 탐색 영역 데이터가 필요하며 조기 중단 기법의 적용도 어렵다. 본 논문에서는 가변 블록 크기에서도 탐색 영역 데이터를 재사용하고 조기 중단 기법도 적용하는 방법을 제안한다. 제안하는 방법을 TZS 알고리즘에 적용한 결과, 화질 저하가 거의 없이 화소 비교 연산량과 탐색 영역 데이터 액세스를 1/3.7 ~ 1/2.9로 줄였다. In HEVC, motion estimation is performed independently for each variable block size. So it requires several times of search window data, and also it is difficult to exploit early termination. In this paper, a new method is proposed to exploit search window data and early termination in variable block size. When applied to TZS algorithm, it reduces pixel comparison and search window data accesses to 1/3.7 ~ 1/2.9 with negligible image quality degradation.