http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조한창(H. C. Cho),조길원(K. W. Cho),이용국(Y. K. Lee) 한국에너지학회 2003 한국에너지공학회 학술발표회 Vol.2003 No.-
Heat regenerator occupied by regenerative materials improves thermal efficiency of regenerative combustion system through the recovery of sensible heat of exhaust gases. By using one-dimensional two-phase fluid dynamics model, the unsteady thermal flow of regenerators with spherical particles were numerically analyzed to evaluate performance of ratio of waste heat recovery and temperature efficiency and to suggest optimized conditions of heat regenerator. It is predicted that exhaust gases temperature at regenerator outlet of 3.5 x lO_6kcal/hr heat regenerator is even lower than design condition and ratio of waste heat recovery is 75.8%.
소형 축열식 복사관 버너시스템용 축열기 설계 및 성능평가
조한창(H. C. Cho),조길원(K. W. Cho),이용국(Y. K. Lee) 한국에너지학회 2004 한국에너지공학회 학술발표회 Vol.2004 No.-
열처리로에 적용되는 소형 축열식 복사관 버너시스템에 사용될 축열기를 설계하고 그 성능을 평가하였다. 좁은 튜브간 간격을 갖는 U형 복사관에 축열기를 적용하기 위하여 상하단면적이 다른 축열기를 설계, 적용하였다. 구형축열제를 사용하는 2만kcal/hr급 축열기 설계에는 기존에 개발된 축열기 해석코드를 이용하였다. 실제 시스템에 적용하여 축열기 전후단의 온도 및 압력을 실시간으로 측정하였다. 그 결과를 축열기 해석코드로부터 얻은 배가스 배출온도와 공기의 예열온도를 비교하였다. 이론적으로 예상된 성능은 80%의 온도효율과 70%의 배열회수율이 얻어졌으나, 실험적 결과로부터는 온도효율이 80%, 배열회수율이 69%가 얻어졌다. 가장 큰 성능 차이는 배가스의 배출온도였는데, 이는 실제 시스템에서 열손실에 의한 축열기로의 배가스 유입온도 하락과 실제 운전에서의 공기/배가스 유량의 증가에 의해 기인된다고 판단된다. Heat regenerator attached in small-scale regenerative radiant tube burner was designed using the theoretical computation code and was confirmed the performance of waste heat recovery ratio. From the computation, when ceramic ball of 4-5kg was used, temperature efficiency and available waste heat recovery ratio were predicted 80% and 70%, respectively. Similar efficiencies were obtained from the experiments using LPG. However, since exhaust gas temperature entered into regenerator was below 850℃ which was much lower than that we expected, preheat air temperature was lowered below 800℃.
조한창,조길원,이용국,Cho, H.C.,Cho, K.W.,Lee, Y.K. 한국연소학회 2001 한국연소학회지 Vol.6 No.1
To evaluate the effect of lobed structure on pollutant emission, an experimental study examines NOx and CO emissions associated with four burner geometries, such as a conventional circular burner and three lobed ones. Rapid mixing allowed by the lobed burner to produce lean premixed flames, with narrower flame stability diagram than for the conventional circular one. Conventional circular burner of wide and uniform burner rim has an advantage of flame stabilization. Correlation on fuel discharge velocity for flame blowout should be included a variable related to the wall effect of the burner. NOx emission reduces by about 5% at the burner with lobed structure in fuel discharge side compared to conventional circular one. This is due to lower flame temperatures through flame elongation and increased radiative heat losses, caused by partially luminous flame in flame front. Meanwhile, at the burner with lobed structure in air discharge side and both fuel and air discharge sides, NOx emission somewhat increases with reduced radiative heat losses in spite of flame elongation. Therefore, the rapid mixing by lobed structure does not always have an advantage on NOx reduction.