http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
제갈종건,모중환,황정은,이규호,김재필,Jegal Jonggeon,Mo Joonghwan,Hwang Jeong-Eun,Lee Kew-Ho,Kim Jaephil The Membrane Society of Korea 2004 멤브레인 Vol.14 No.3
폴리아미드 역삼투막을 이용하여 염색폐수를 처리하였다. 염색폐수를 멤브레인 공정에 적용하기 전에 알럼, 페릭 클로라이드, HOC-100와 같은 화학응집제를 이용하여 먼저 처리하였다. 이러한 전처리가 분리막에 의한 폐수처리 공정에 어떠한 영향을 주는지 알아보기 위하여 최적의 응집/침전 조건을 찾았다. 사용된 모든 응집제에 있어서, 전처리된 폐수의 COD와 UV-흡수도는 약 70% 정도의 감소를 보였다. 이렇게 전처리된 폐수를 다시 분리막 공정으로 처리하였다. 전처리 시 사용된 응집제들이 분리막 공정에서 어떻게 분리막 오염에 영향을 주는지를 조사하였으며, 그 결과 HOC-100가 폐수 내에 존재하는, 분리막 오염을 유발하는 물질 제거에 가장 좋은 효과를 나타내는 것을 알 수 있었다. Treatment of a dyeing wastewater was carried out using polyamide RO-membranes. Before applying the wastewater to the membrane process, it was pretreated with various chemical coagulants such as alum, ferric chloride and HOC-100A. In order to see the effect of the pretreatment on the membrane separation process, the optimum conditions for the coagulation and sedimentation process were sought. As a result, by the pretreatment, for all the coagulants used, the chemical oxygen demand (COD) and UV-absorbance of the wastewater were lowered by more than 70%. The pretreated wastewater was then applied to the membrane process. The effect of the coagulants used for the pretreatment on the membrane fouling was studied. From this study, it was found that the HOC-100A was the best out of the coagulants used for the removal of the materials that could cause membrane fouling.
L-폴리락타이드, D-폴리락타이드의 합성과 입체복합체 폴리락타이드의 제조 및 특성연구
제갈종건(Jong Geon Jegal),김지현(Ji Hyun Kim),송봉근(Bong Keun Song),신채호(Chae Ho Shin) 한국고분자학회 2011 폴리머 Vol.35 No.1
본 연구에서는 L-lactide, D-lactide를 단량체로 하여 tin 2-octoate, lauryl alcohol을 각각 촉매와 개시제로 사용하여 촉매량(0.5∼1.0 wt%)과 개시제의 양(0.5∼0.1 wt%)을 달리하여 140 ℃에서 lactide의 고리개환중합으로 고분자량의 L-PLA와 D-PLA를 합성하였다. 합성된 PLA는 Mn:30000∼90000 g/mol의 다양한 분자량이 나타났으며 합성된 L-PLA와 D-PLA를 이용해 조성비를 다르게 하여 stereocomplex-PLA를 제조하였다. Stereocomplex-PLA의 용융점, 열분해온도, 열적 안정성은 단일고분자 L-PLA, D-PLA보다 높아짐을 확인하였다. 이러한 결과로 보아 이성질체 L-PLA, D-PLA 분자간 인력이 작용한다는 사실을 예상할 수 있었고 XRD를 통해 모폴로지의 변화를 살펴본 결과 단일고분자와 stereocomplex-PLA는 상이하게 변하는 사실을 확인하였다. 또한 기계적 강도를 측정하여 L-PLA, D-PLA보다 stereocomplex-PLA의 최대응력과 변형률이 증가함을 확인하였다. L-PLA or D-PLA was synthesized in bulk at 140 ℃ by ring opening polymerization(ROP) of L-lactide or D-lactide as a monomer using tin(Ⅱ) octoate and lauryl alcohol as a catalyst and an initiator with changing the amounts of catalyst(0.25∼1.0 wt%) and initiator(0.1∼0.5 wt%). And stereocomplex- PLA was prepared by L-PLA, D-PLA having a wide range of molecular weight(30000∼90000 g/mol) and L-PLA/D-PLA blends having different mixing ratio(XD). The melting temperature, thermal degradation temperature and thermal stability of stereocomplex-PLA were higher than those of homopolymers( L-PLA, D-PLA). We supposed that these improvements arose from a strong interaction between L-PLA and D-PLA. The improved mechanical properties and changes in morphology of LPLA/ D-PLA blends were compared to those of homopolymers(L-PLA, D-PLA).