http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정동열(Dong-yeol Jung),홍성수(Sung-Soo Hong),최병조(Byung-Cho Choi),사공석진(Sug-Chin Sakong) 전력전자학회 2002 전력전자학술대회 논문집 Vol.- No.-
Two existing continuous-time models for the current-mode control have presented noticeable differences in their small-signal predictions. As an attempt to clarify the origin of these disparities, this paper presents an alternative way of deriving a continuous-time model for the current-model control The results of this paper would provide insights to comprehend the dissimilarity in the modeling method and final results of the earlier models of current-mode control
한국형 아파트의 난방에너지 분석 2: 난방방식에 따른 차이
이봉진,정동열,이선,홍희기,Lee, Bong-Jin,Jung, Dong-Yeol,Lee, Sun,Hong, Hee-Ki 대한설비공학회 2004 설비공학 논문집 Vol.16 No.5
In order to save the energy in apartment houses, it is essential that the energy amount consumed in heating per household should be surveyed and analyzed according to heating method, which can be classified into unit, central and district methods. As a basis, we selected the household with nominal area of 32 py. because it accounts for the most percentage in Korea. It is estimated that the gas amount for cooking is 90 ㎥ and the energy amount for hot water supply is 11.41 GJ for a year, which is necessary to calculate the heating energy. Through the survey of actual energy consumption in Seoul and Gyeonggi, the energy amount used in heating can be obtained according to the heating type: 26.02 GJ/year for the unit heating, 28.09 GJ/year for the central heating and 40.61 GJ/year for the district heating.
정용준(Yong-Joon Jung),한상규(Sang-Kyoo Han),홍성수(Sung-Soo Hong),정동열(Dong-Yeol Jung),김진욱(Jin-Wook Kim),이효범(Hyo-Bum Lee),노정욱(Chung-Wook Roh) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
본 논문은 낮은 입력 DC 전압에서 높은 음의 DC 전압을 출력하는 높은 전환 비의 극성 반전 형 DC/DC 전력 변환회로에 관한 것으로써, 하나의 스위치, 하나의 인덕터, 그리고다수개의 캐패시터와 다이오드로 구성된다. 기존의 극성 반전 형 DC/DC 컨버터 회로와 비교하여, 고압 변환 트랜스포머 대신에 인덕터를 사용할 수 있어, 자기 소자의 부피 및 크기는 물론 원가저감이 가능하다. 또한 자려 발진(Self Oscillation) 방식을 사용하여 별도의 제어 IC 가 필요 없으므로, 회로구성이 대단히 간단하고, 저가격의 전원 회로를 만들 수 있다. 또한 다이오드들의 전압 스트레스가 감소하여 저가격 고성능의 고압 변환장치 구현이 가능하다. 제안된 회로의 동작원리를 설명하고, 타당성을 Simulation 및 실험을 통하여 검증한다.
주물공정 폐열 재이용을 위한 잠열소재기반 열저장 운송시스템 적용 연구
지형용(Hyung Yong Ji),정동열(Dong-yeol Chung),정순영(Soon Yung Jung),박동호(Dong-ho Park),이수양(Soo-yang Lee),백종현(Jong Hyeon Peck) 대한설비공학회 2020 대한설비공학회 학술발표대회논문집 Vol.2020 No.6
Design and manufacture of thermal storage and transportation system was performed in order to reuse the waste heat of the casting process, and the heat charge and discharge properties are analyzed in field site. In the heat charge of thermal storage tank, the waste heat from the casting process induction furnace is used as an evaporation heat source of heat pump, and condensing heat source supplied to thermal storage tank. Then, the thermal storage tank was transferred in order to supply the heat required for the concrete curing room as a supplementary heat source. As an experimented results of the latent heat temperature, capacity, and heat charge and discharge time of the heat storage tank, it is an appropriate method for this application study. However, energy saving and process condition analysis must be additionally secured to the power consumption of heat pump and heater mixing.
정용준(Yong-Joon Jung),이재광(Jae-Kwang Lee),한상규(Sang-Kyoo Han),홍성수(Sung-Soo Hong),정동열(Dong-Yeol Jung),김진욱(Jin-Wook Kim),이효범(Hyo-Bum Lee),노정욱(Chung-Wook Roh) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
고압 전원 장치(High Voltage Power Supply)는 근래에 와서 산업전반에 응용이 매우 광범위하게 확산되고 있고 고전압장치가 필수적으로 이용 되어야 하는 분야가 점차 확산되고 있다. 응용분야로는 신소재 개발과 플라즈마 응용을 위한 공업용과 민생용, 의료기기용, 군사용, 또한 프린터에 이르기까지 다양하게 있다. 가정이나 사무실에서 쉽게 접할 수 있는 IT장비인 프린터인 경우에도 전원 공급 장치의 측면에서는 화상형성에 있어 가장 필수적인 안정적이고 다기능을 가지는 고압 전원 장치를 적용하고 있고, 수요 또한 증가하고 있다. 본 논문은 낮은 입력 DC전압에서 높은 음의 DC전압을 출력하는 높은 전환 비의 극성 반전 형 DC/DC 전력 변환 회로에 관한 것으로써, 하나의 스위치, 하나의 인덕터, 그리고 다수개의 캐패시터와 다이오드로 구성된다. 기존의 극성 반전 형 DC/DC 컨버터 회로와 비교하여, 고압 변환 트랜스포머 대신에 인덕터를 사용할 수 있어, 자기 소자의 부피 및 크기는 물론 원가저감이 가능하다. 또한 반도체 소자의 Voltage Stress가 감소된다. 제안된 회로의 원리를 분석하고, 종래의 고압 전원 장치와 비교함으로써 장점을 알아본 후, 동작원리에 대한 타당성을 Simulation 및 실험을 통하여 검증한다.
고태석(Tae-Seok Ko),정용준(Yong-Joon Jung),이재광(Jae-Kwang Lee),정동열(Dong-Yeol Jung),한상규(Sang-Kyoo Han),홍성수(Sung-Soo Hong),김진욱(Jin-Wook Kim),이효범(Hyo-Bum Lee),노정욱(Chung-Wook Roh) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
본 논문은 공진요소를 포함한 고전압 플라이백 컨버터의 설계 절차를 제시하는 것으로써, 고압 플라이백 컨버터 설계 시 기존 플라이백 컨버터의 Power Stage 설계 식을 적용하였을 때 원하는 출력 전압을 얻지 못한다. 고전압을 발생시키기 위한 고전압 플라이백 변압기는 2차 측의 많은 권선수와 높은 전압 때문에 기생 커패시턴스(parasitic capacitance)가 매우 크고, 과도상태에서 컨버터 전류 및 전압의 기생 공진(parasitic resonance)이 심각하게 발생한다. 이러한 공진요소를 고려하여 고전압 플라이백 컨버터의 특성을 해석하고 설계 절차를 제시한다. 이를 통해 고전압 플라이백 컨버터의 소형화 및 경량화를 도모하고, 고압 전원장치의 기술 축적을 위해 연구되었다. 제안된 회로의 동작원리를 설명하고, 타당성을 실험을 통하여 검증한다.