http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
논문 : 지표면에 근입한 앵커두부처리 시스템의 적용성 평가
민경남 ( Kyoung Nam Min ),배우석 ( Woo Seok Bae ),안광국 ( Kwang Kuk Ahn ),정구식 ( Ku Sic Jeong ) 대한지질공학회 2012 지질공학 Vol.22 No.1
앵커두부에서의 많은 문제점들은 앵커두부가 외부에 노출되어 풍화에 직접적인 영향을 받고, 진동이나 외력에 의해 물리적인 변형과 손상을 많이 받기 때문이다. 본 연구에서는 기존 수입판 방식의 파괴원인을 분석하여 앵커두부에서 발생 하는 문제점 해결을 위해 앵커두부의 지표면 근입방식을 제시하였다. 앵커두부처리 방식의 안정성을 기존방식과 비교, 검토하기 위하여 범용해석프로그램인 ABAQUS로 3차원 정밀 수치해석을 수행하여 하중조건에 따른 변위 및 응력분포양상을 분석하였고, 현장 적용성 검증을 위한 시험시공과 계측을 통해 적용 가능성을 평가하였다. 수치해석 결과는 최대수직응력이 9.73 MPa, 수직변위가 1. 34 mα L로 나타났고, 현장시험을 통하여 콘크리트 수압판의 변위가 근입형 지압판에 비해 3∼4배의 큰 변위량을 보인다는 것을 확인하였다. Anchor heads a recommonly exposed to surface weathering processes that cause Physical damage by vibration and external forces. This study presents a new method of anchor-head installation that uses near-surface embed-ding based on analyses of concrete block failure. ABAQUS 3D numerical modeling performed to compare this method with the standard technique and to analyze the distribution of displacement and the stress pattern. In addition, application of the method to a real-world case was tested by in- situ measurements. The results show a maximum vertical stress9.73 MPa and vertical displacement of 1.34 mm. Field tests indicated that displacement of a concrete block was 3 to 4 times greater than that of an embedded bearing Plate.