http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
구상흑연주철의 표준화도에 미치는 탄소 및 규소의 영향에 대하여
이희철,장치현,한성호,박윤우,김수영 대한금속재료학회(대한금속학회) 1978 대한금속·재료학회지 Vol.16 No.5
本 硏究는 球狀黑鉛鑄鐵의 성질을 구명하기 위한 기초 연구로서, 標準化度(引張强度, 硬度, 延伸率)등에 대하여 硏究한 것이다. 즉 炭素 일정하에서 珪素의 영향을, 珪素 일정하에서 炭素의 영향을 조사 검토하였다. 本 硏究에서 얻은 중요한 사항은 다음과 같다. 1) 珪素를 2.35%로 일정하게 하고 炭素를 변화시켰을 때 球狀黑鉛鑄鐵의 標準化度(引張强度 SDNsi, 硬度 SHNsi)는 다음과 같이 된다. SDNsi=-1.95Sc+85.1/15.6Sc+30.9×100 SHNsi=-90.0Sc+287)/105 Sc+31 2) 炭素를 3.21%로 일정하게 하고 珪素를 변화시켰을 때의 標準化度(引張强度 SDNc, 硬度 SHNc)는 다음과 같다. SDNc=-68.0Sc+132.2/15.6Sc+30.9×100 SHNc=-410Sc+586/105Sc+31 3) 珪素를 2.35%로 일정하게 하고, 炭素를 변화시켰을 때의 延伸率은 Sc가 1인 경우는 7.5%, Sc가 0.8인 경우는 4.7%이나, 炭素를 일정하게 하고 珪素를 변화시켰을 때는 큰 差異가 생긴다. To study the properties of spheroidal graphite cast iron such as tensile strength, hardness and elongaion, the effects of Si on the properties of the alloy under the constant amount of C were investigated and vice verse. The important results obstained are as follows. 1) Under the 2.5% of silicon with the variation of amouuts of carbon, degree of normalization (SDNsi) and hardness (SHNsi) of the alloy are as follows. SDNsi=-1.95Sc+85.1/15.6Sc+30.9×100 SHNsi=-90.0Sc+287)/105 Sc+31 2) Under 3.21% of carbon with the variation of amount of silicon, SPNc and SHNc of the alloy are as follows SDNc=-68.0Sc+132.2/15.6Sc+30.9×100 SHNc=-410Sc+586/105Sc+31 3) Under 2.35% of silicon the elongation due to variation of amount of carbon is 7.5% when Sc is 1 and the elongation is 4.7% when Sc is 0.8. Therefor the large differences in the elongation between Sc equals 1 and 0.8 were not observed. However, under the constant amount of carbon, differences in the elongation due to variation of silicon are very large.