http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
태양전지 전원 공급장치를 이용한 발파진동 자동화 계측시스템 운영 사례연구
유지완 ( Ji Wan Yoo ),이태노 ( Tai Ro Lee ),김정렬 ( Jung Ryul Kim ),김영석 ( Young Suck Kim ) 대한화약발파공학회 2008 화약발파 Vol.26 No.2
발파진동 계측방법은 일반적으로 수동식 방법과 자동화 방법으로 나눌 수 있다. 이중에서 자동화 계측방법은 계측원의 수동적 작동에 의한 방법에 의존하지 않고 별도의 공간(사무실 등)에서 원격장치를 이용하여 전통측정기를 작동시켜 데이터를 전송받게 된다. 본 연구에서는 태양전지를 이용한 발파진동 자동화 계측시스템 운영 연구사례를 소개하고자 한다. 향후, 계측원 접근이 어렵고 발파작업중에 진동값 변화추이를 수시로 관찰이 필요한 현장에서는 이와 같은 쏠라셀을 이용한 자동화 계측시스템이 매우 유용하게 활용될 수 있으며 발파진동 제어와 안전발파 관리가 효과적으로 이루어질 수 있을 것으로 사료된다. Measuring methods of the blasting vibration were generally divided the manual method and the automatical method. When using the automatical method, field data of the vibration meter can be transferred to a operation computer by using remote equipments. In this study new automatical system using solar power supply is to be introduced. New automatical system is well suited for the field which is difficult to access and is needed frequent measurements of the blasting vibration. And it can make easy to accumulate the data and control the blasting vibration for safe blasting.
전도공법에 의한 축소모형 철근콘크리트 구조물의 붕괴거동
박훈(Hoon Park),이희광(Hee-Gwang Lee),유지완(Ji-Wan Yoo),송정언(Jeung-Un Song),김승곤(Seung-Kon Kim) 한국암반공학회 2007 터널과지하공간 Vol.17 No.5
발파해체 되는 철근콘크리트 구조물은 교대하중에 의해 정형구조에서 비정형구조로 변환되며 붕괴거동은 비선형적인 대변위 거동을 한다. 철근콘크리트 구조물의 붕괴거동에 대한 많은 수치 모델링 연구가 수행되었지만, 비선형적인 대변위 거동을 해석하기에는 아직 부족한 수준이다. 본 연구에서는 실제 철근콘크리트 구조물을 1/5로 축소한 축소모형 구조물을 제작하였다. 전도공법으로 1층, 3층, 5층 축소모형 구조물을 발파하여 상부자중에 의한 구조물의 붕괴 가능성을 고찰하였으며, 구조물의 붕괴거동을 X방향(수평방향)의 변위, Y방향(수직방향)의 변위, 상대 변위각으로 분석하였다. 실험결과 자중에 의한 구조물의 붕괴를 유도하기 위한 상부 자중의 크기를 확인할 수 있었다. 또한 구조물의 붕괴에 따른 X방향의 변위와 Z방향의 변위는 발파 후 67ms, 300ms부터 서서히 증가하였고, 교대하중에 의해 3층 구조물의 초기 붕괴 속도가 5층 구조물보다 크게 발생하는 것을 확인하였다. The regular RC structures have been transformed into irregular RC structures by alternate load of RC structures during explosive demolition. Numerical simulation programs have contributed to a better understanding of large displacement collapse behavior during explosive demolition, but there remain a number of problems which need to be solved. In this study, the 1/5 scaled 1, 3 and 5 stories RC structures were designed and fabricated. To consider the collapse possibility of upper dead load, fabricated RC structures were demolished by means of felling method. To observe the collapse behavior of the RC structures during felling, displacement of X-direction (or horizontal), displacement of Z-direction (or vertical) and relative displacement angle from respective RC structures were analyzed. Finally explosive demolition on the scaled RC structures using felling method are carried out, collapse behavior by felling method is affected by upper dead load of scaled RC structures. Displacement of X and Z direction increases gradually to respective 67ms and 300ms after blasting. It is confirmed that initial collapse velocity due to alternate load has a higher 3 stories RC structures than 5 stories.