http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가압기 Heater Sleeve 용접부 결함 건전성평가
이재봉(Jae-Bong Lee),이선호(Seon-Ho Lee),김진선(Jin-Seon Kim),유승우(Sung-Woo Ryu),최상인(Sang-In Choi) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
Integrity evaluation for flaw in a pressurizer heater sleeve weld was performed in this study. Several porosities were detected inside of the weld by ultrasonic inspection and it was assumed as a embedded penny shaped crack in the evaluation of integrity. The fatigue growth of assumed crack was calculated. Design load including internal pressure and thermal load for pressurizer was considered. Load cycle referred in the design specification of pressurizer was considered in the crack growth analysis. The amount of fatigue crack growth during design life time was very small and it shows the porosities detected in the ultrasonic inspection do not affect the integrity of pressurizer.
Shrunk-on Type 저압 터빈 로터의 가동중검사를 위한 초음파검사 시스템 개발
박준수(Joon-Soo Park),성운학(Un-Hak Seong),유승우(Sung-Woo Ryu) 한국비파괴검사학회 2009 한국비파괴검사학회지 Vol.29 No.2
터빈은 원자력발전소의 주요기기로서 고온ㆍ고압하에서 고속회전으로 인해 신뢰성 있는 검사가 요구된다. 터빈의 가동중검사의 경우 블레이드가 조립된 상태에서 검사가 수행되며 구조적 복잡성으로 인하여 탐촉자의 접근이 제한되며, 신호 해석이 매우 어렵다. 본 연구에서는 신뢰성 높은 신호해석을 위하여 실제 터빈과 크기 및 형상이 동일한 mock-up을 제작하였다. 터빈의 key와 내표면부의 결함탐상을 위해 pulse-echo 및 TOFD 기법을 개발하였고, dovetail 검사를 위하여 위상배열 초음파탐상기법을 개발하였다. 개발된 기법들을 가동중 터빈 검사에 효율적으로 적용하기 위해 자동화 검사 scanner를 제작하였으며, 현장적용을 통하여 신뢰성을 검증하였다. Turbine, which is one of major components in nuclear power plants, requires reliable nondestructive inspections. But, accessibility of transducers is limited and interpretation of acquired signals is not easy at all due to the complication. So, in this study, we have fabricated mock-up specimens of real size and shape. we applied pulse-echo method and time-of-flight diffraction(TOFD) method for precise inspection of turbine key and wheel bore. And phased array ultrasonic testing method was adopted for wheel dovetail of turbines by using mock-up. Furthermore, an automatic scanner system was developed for in-service inspection of the developed methods.