http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이인모,오진기 한국전산구조공학회 1990 전산구조공학 Vol.3 No.3
최근 우리나라에서도 지진으로 인한 재해를 최소한으로 감소 또는 방지하기 위하여 일반 건축 구조물의 내진설계를 의무화 하도록 규정하고 있다. 그러나 지진하중에 대한 지반-말뚝-구조물 시스템의 내진해석과 설계는 아직도 완전하게 정립되지 못한 실정이며, 지금까지 우리나라에서 원자력발전소, 해양구조물 등과 같은 특수 구조물과 몇몇 고층건물을 제외한 대부분의 일반 건축물에 대한 말뚝의 설계도 지반의 동적특성을 제대롤 반영하지 않는 정적해석이 수행되고 있다. 그렇지만 정적하중과 지진하중의 하중특성은 근본적인 차이가 있으므로 이에 대한 설계를 추가하여야 한다. 따라서 본 고에서는 깊은 기초의 내진설계에 적용하기 위해 이제까지 연구발표된 여러가지 내진해석방법을 간략하게 소개하고 이를 비교, 검토함으로써 동적특성을 어느정도 반영하는 실용적인 설계법을 제시하고자 한다.
이인모,오진기 한국지반공학회 1990 대한토질공학회지 Vol.6 No.3
본 연구에서는 깊은 기초의 내진설계에 적용하기 위해, 지진하중에 의한 말뚝기초의 응답을 산출하여 비교, 검토하였다. 본 연구에서 사용된 해석 방법은 Subgrade Reaction Theory 및 탄성해석법과 같은 유사정적 해석방법, Prakash및 Gazetas가 각각 제안한 동적 해석방법이며, 예제해석을 통해 말뚝의 최대 상대변위 및 최대 휨모멘트를 위의 각 방법을 이용해서 산출하였고, 그 결과를 각각 비교하였다. 또한 말뚝의 군효과를 근사적으로 고려하여 Novak에 의해 수행된 실험 결과와 비교하였다. 해석결과를 분석해 볼 때 Kaynia와 Kausel이 제안한 동적 Group Interaction Factor Approach 에 의한 땅법 및 Gazetas가 제안한 방법의 최대 상대변위는 실측치와 부합하게 산정되었으며, Prakash 가 제안한 방법과 정적 Group Interaction Factor Approach에 의한 변위 및 휨모멘트는 과대평가되었다. 그러므로, 말뚝의 내진설계시에 동적 Group Interaction Factor Approach와 결합한 유사정적해석 을 사용하고 Gazetas가 제안한 동적방법에 의해 이를 검토하는 것이 바람직하다. In this paper, response of pile foundations under seismic loading is studied for use in aseismic design of deep foundations. Both the pseudostatic methods such as subgrade reaction theory by Reese, and elastic analysis by Poulos, and the dynamic methods proposed by, respectively, Prakash and Gazetas, are used for this study. The top displacements and maximum bending moments of example piles are obtained by each method mentioned above, and the results by each method are compared among others. The group pile effects are also considered approximately. The calculated results are compared with experimental results obtained by Novak in 1984. The pseudostatic methods, combined with dynamic group interaction factors, and the dynamic method proposed by Gazetas which considers both kinematic interaction and inertial interaction, separately, estimate the top displacements reasonably well : the method by Prakah or the pseudostatic methods combined with static group interaction factors may overestimate the top displacements and bending moments as well. Therefore, it is recommended to the the simple elastic analysis combined with dynamic group interaction factors for aseismic design of pile foundatins and to confirm the results by the Gaz etas' dynamic methods.