http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
프로펠러 수차 간극과 피치각 변화에 따른 내부 유동 특성 비교
변순석(S.-S. Byeon),홍창기(C.-K. Hong),김윤제(Y.-J. Kim) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
This article aims to numerically investigate the effects of active flow from the blade tip platform. In addition, the another independent variable is considerable modification of the exit blade tip angles. Using the free vortex theory, and operating with a gross head from 3.5m, the effect of the exit blade tip angles was investigated. It further presented theoretical methodology to analyze the effects of design parameters like the exit blade tip angles and a tip clearance. This paper describes the blade design of an axial propeller hydraulic turbine, and presented the relationship between the layout of the blade profile and the shaft power and efficiency. The results showed that the exit tip modification and tip clearance modification were decreased a significant drop of turbine efficiency about 3~13%.
변순석(S.-S. Byeon),김윤제(Y.-J. Kim) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.10
반도체 디바이스의 집적도가 증가하고 회로 선폭이 감소함에 따라 미세입자 오염에 의한 반도체 디바이스의 패턴 결함 및 전기적 특성 불량 문제가 심각해진다. 웨이퍼 상부의 오염물질은 소자의 성능을 감소시키고 수율을 저하시키기 때문에 이러한 오염물을 웨이퍼 표면으로부터 효과적으로 제거하기 위해서는 세정 공정을 연속적으로 수행하여야 한다. 현재 웨이퍼 캐리어 내 오염물질을 제거하기 위하여 질소가스가 사용되고 있으나 웨이퍼 캐리어 내부로 유입되는 질소가스가 유로 구조상 웨이퍼 간극사이로 균일한 유동분포를 형성하지 못하고 있다. 본 연구에서는 웨이퍼 간극사이로 유동을 제어하기 위해 웨이퍼 캐리어 내 유입구의 형상변화와 유입 관로 직경 변화에 따른 유동록성을 수치해석적 방법으로 수행하였으며, 유로의 형상변화와 캐리어 내부에 유동가이드를 부착시켜 균일한 유동을 구현할 수 있다는 것을 확인하였다. 또한 유입 관로의 직경에 따른 유속의 변화에 따라 전체 유동 패턴이 변화됨을 확인하였다. As the degree of integration of semiconductor device was increased and circuit line width was decreased, the pattern defect of semiconductor device and poor electrical characteristics is getting serious by particles pollution. In order to remove pollutants in wafer carrier, nitrogen gas is generally used but nitrogen gas in wafer carrier was not formed into uniform flow between wafers. In this paper, numerical analysis was performed by changing the shape of the inlet duct and the diameter of the inlet duct for control turbulent flow. Through this method, it is confirmed that uniform flow was shown between wafers by changing the shape of the inflow duct and forming resistor in the carrier wafer. The result was confirmed that the change of flow velocity with the change of diameter of the inlet duct influenced the total flow patterns in the wafer carrier.
냉각유로 분리벽 경사각 변화가 스크류 압축기 내부 열유동 특성에 미치는 영향
조성욱(S.-W. Cho),변순석(S.-S. Byeon),홍창기(C.-K. Hong),이종철(J.-C. Lee),김윤제(Y.-J. Kim) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.12
Thermal-flow characteristics in coolant flow passage of screw compressor have been investigated. In particular, the effects of the inclined angle (α=0˚?, ±2˚?, ±5˚?) of separation block in the coolant channel are studied. Numerical study was performed by using ANSYS CFX with the shear stress transport(SST) turbulence model. Results showed that the pressure drop and heat transfer increase as the inclined angle of separation block increases, which is resulted from the flow separation and centrifugal force. The results were graphically depicted with various flow and geometrical conditions.